{
  "immutable_geometry_nets_pads_linkage_preserved": true,
  "board_sha256": "03b69c4084dba328b11e2373c219e8fe462bcb3add934cf9f527214b21bd9cb6",
  "independent_min_different_net_or_npth_clearance_mm": 0.2749999999999886,
  "closest_items": [
    "R2.2:c118f27f-8ad4-4abe-b9c0-a30a22fe60c9",
    "99fb402a-445b-4eba-aedf-76b7f0cad042"
  ],
  "min_copper_or_npth_edge_gap_mm": 0.5250000000000057,
  "min_rf_gap_mm": 0.025000000000005684,
  "min_via_to_other_drilled_hole_gap_mm": 0.8401754250991242,
  "track_width_counts": {
    "0.25": 425,
    "0.5": 144
  },
  "routed_length_mm_by_net": {
    "/BTN_SELECT": 95.16152954766495,
    "/GND": 152.2615364335217,
    "/+3V3": 106.94219089103528,
    "/RS_DCD": 47.76152984055992,
    "/RS_DSR": 56.835284377834164,
    "/RS_RI": 66.02000635033798,
    "/RS_DTR": 52.162796381301995,
    "/RS_RTS": 56.23655121147421,
    "/RS_CTS": 58.073809511675655,
    "/RS_TX": 47.51030692030297,
    "/RS_RX": 43.90406233625865,
    "/RS_VALID": 64.36573922778403,
    "/RS_OFF_N": 67.05000417516253,
    "/BTN_PREVIOUS": 86.95076506672746,
    "/OLED_SDA": 54.781626385188304,
    "/OLED_SCL": 53.30787155502609,
    "/BTN_NEXT": 106.4266552277327
  },
  "tracks": 569,
  "vias": 20,
  "copper_zones": 0,
  "drc_freshly_run": true,
  "drc_violations": 0,
  "unconnected_items": 0,
  "drc_ignored_checks": [
    {
      "description": "Footprint has no courtyard defined",
      "key": "missing_courtyard"
    },
    {
      "description": "Track endpoint not centered on via",
      "key": "track_not_centered_on_via"
    },
    {
      "description": "Tuning profile track geometries",
      "key": "tuning_profile_track_geometries"
    },
    {
      "description": "Footprint doesn't match symbol's footprint filters",
      "key": "footprint_filters_mismatch"
    },
    {
      "description": "Footprint component type doesn't match footprint pads",
      "key": "footprint_type_mismatch"
    }
  ],
  "overwrite_guard_tests": [
    {
      "args": [
        "--route"
      ],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: --route requires --overwrite; back up manual routing first"
    },
    {
      "args": [
        "--route",
        "--overwrite"
      ],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: existing routing protected; --replace-routes required even for preview"
    },
    {
      "args": [],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: existing routing protected; --replace-routes required even for preview"
    }
  ]
}