{
  "immutable_geometry_nets_pads_linkage_preserved": true,
  "board_sha256": "53e36538c0669604457b9e1a9ff1b1e20422970e8f9f356088c4581868ad5045",
  "independent_min_different_net_or_npth_clearance_mm": 0.2705441169852849,
  "closest_items": [
    "U1.38:4b8eabef-8493-437d-bd02-cb9ff4afd7cd",
    "d95f45cb-7fa4-4203-a786-0a069425e2b8"
  ],
  "min_copper_or_npth_edge_gap_mm": 1.9,
  "min_rf_gap_mm": 0.025000000000005684,
  "min_via_to_other_drilled_hole_gap_mm": 0.8205441169852848,
  "track_width_counts": {
    "0.25": 451,
    "0.5": 114
  },
  "routed_length_mm_by_net": {
    "/BTN_SELECT": 88.94832552628598,
    "/GND": 141.68412246223386,
    "/+3V3": 90.29604731966161,
    "/RS_DCD": 43.068490178879834,
    "/RS_DSR": 55.09398706495997,
    "/RS_RI": 67.91373841554615,
    "/RS_DTR": 52.53487761643567,
    "/RS_RTS": 60.056714985368814,
    "/RS_CTS": 63.65082753507114,
    "/RS_TX": 53.135260491559045,
    "/RS_RX": 51.637429252872906,
    "/RS_VALID": 72.10630197626116,
    "/RS_OFF_N": 78.04100118378895,
    "/BTN_PREVIOUS": 78.83370879187974,
    "/OLED_SDA": 62.65168524184884,
    "/OLED_SCL": 61.1779295330028,
    "/BTN_NEXT": 101.24898628384834
  },
  "tracks": 565,
  "vias": 22,
  "copper_zones": 0,
  "drc_freshly_run": true,
  "drc_violations": 0,
  "unconnected_items": 0,
  "drc_ignored_checks": [
    {
      "description": "Footprint has no courtyard defined",
      "key": "missing_courtyard"
    },
    {
      "description": "Track endpoint not centered on via",
      "key": "track_not_centered_on_via"
    },
    {
      "description": "Tuning profile track geometries",
      "key": "tuning_profile_track_geometries"
    },
    {
      "description": "Footprint doesn't match symbol's footprint filters",
      "key": "footprint_filters_mismatch"
    },
    {
      "description": "Footprint component type doesn't match footprint pads",
      "key": "footprint_type_mismatch"
    }
  ],
  "overwrite_guard_tests": [
    {
      "args": [
        "--route"
      ],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: --route requires --overwrite; back up manual routing first"
    },
    {
      "args": [
        "--route",
        "--overwrite"
      ],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: existing routing protected; --replace-routes required even for preview"
    },
    {
      "args": [],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: existing routing protected; --replace-routes required even for preview"
    }
  ]
}