{
  "geometry_nets_pads_linkage_match_authorized_group_moves_and_values": true,
  "board_sha256": "fa95d5747c6e455b2c5effd11d11091b1f95df015dbe73c99b14092487a034c5",
  "independent_min_different_net_or_npth_clearance_mm": 0.2527621919573916,
  "closest_items": [
    "DS1.4:91a4dcef-1b36-4e3d-a15c-c4578077c27b",
    "265214f3-776f-4707-be6e-993749f3c8a7"
  ],
  "min_copper_or_npth_edge_gap_mm": 1.9,
  "min_rf_gap_mm": 0.025000000000005684,
  "min_via_to_other_drilled_hole_gap_mm": 0.47246725698856695,
  "track_width_counts": {
    "0.25": 642,
    "0.5": 296
  },
  "routed_length_mm_by_net": {
    "/BTN_SELECT": 93.73257585313998,
    "/GND": 167.13877028476702,
    "/+3V3": 110.38340361450781,
    "/RS_DCD": 43.09677445013352,
    "/RS_DSR": 55.09398706495997,
    "/RS_RI": 75.93696129246699,
    "/RS_DTR": 53.18208599609399,
    "/RS_RTS": 60.056714985368814,
    "/RS_CTS": 81.83108365614024,
    "/RS_TX": 53.135260491559045,
    "/RS_RX": 52.38890111544552,
    "/RS_VALID": 73.53056575207658,
    "/RS_OFF_N": 78.70963033389047,
    "/BTN_PREVIOUS": 84.48232420012336,
    "/OLED_SDA": 63.88671049501825,
    "/OLED_SCL": 62.3836654642909,
    "/BTN_NEXT": 106.89760169209195
  },
  "tracks": 938,
  "vias": 41,
  "copper_zones": 0,
  "drc_freshly_run": true,
  "drc_violations": 0,
  "unconnected_items": 0,
  "drc_ignored_checks": [
    {
      "description": "Footprint has no courtyard defined",
      "key": "missing_courtyard"
    },
    {
      "description": "Track endpoint not centered on via",
      "key": "track_not_centered_on_via"
    },
    {
      "description": "Tuning profile track geometries",
      "key": "tuning_profile_track_geometries"
    },
    {
      "description": "Footprint doesn't match symbol's footprint filters",
      "key": "footprint_filters_mismatch"
    },
    {
      "description": "Footprint component type doesn't match footprint pads",
      "key": "footprint_type_mismatch"
    }
  ],
  "overwrite_guard_tests": [
    {
      "args": [
        "--route"
      ],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: --route requires --overwrite; back up manual routing first"
    },
    {
      "args": [
        "--route",
        "--overwrite"
      ],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: existing routing protected; --replace-routes required even for preview"
    },
    {
      "args": [],
      "exit_code": 2,
      "reason": "route_pcb_draft.py: error: existing routing protected; --replace-routes required even for preview"
    }
  ]
}