# ESP32 Serial Swiss Army Knife ![ESP32 Serial Swiss Army Knife logo](/images/logo.png "ESP32 Serial Swiss Army Knife") Universal wireless serial adaptor firmware for the ESP32-S3. ## Initial hardware target - ESP32-S3-DevKitC-1-compatible development board - ESP32-S3-WROOM-1-N16R8 module - 16 MB flash - 8 MB octal PSRAM - Adafruit MAX3243 full-pinout RS-232 breakout, product 5988 The firmware has completed **Phase 0 hardware characterization**, the **Phase 1 serial-core foundation**, the **Phase 2 transport-neutral session broker**, native USB CDC-ACM, the **Phase 4 Wi-Fi foundation**, the **Phase 5 authenticated HTTPS web terminal**, and the **Phase 6 authenticated SSH serial transport**. Phase 5B provides an offline xterm.js interface and bounded WebSocket transport; Phase 6 adds a bounded, password-authenticated, shell-only SSH path with an independent persistent host identity. The MAX3243 diagnostics and recovery consoles remain available. No electrical test starts automatically; UART1 starts when requested explicitly or when native USB, an authenticated web terminal, or an authenticated SSH session opens. ## Hardware wiring See [`wiring.md`](wiring.md) for the hardware profile, GPIO assignments, loopback diagrams, safety notes, and the recommended test sequence. The initial profile covers the ESP32-S3-DevKitC-1 N16R8 and the Adafruit MAX3243 full-pinout RS-232 breakout. ## Flash partition layout The N16R8 target has 16 MiB flash and 8 MiB octal PSRAM. PlatformIO uses the custom [`partitions.csv`](partitions.csv) layout: | Partition | Offset | Size | Purpose | |---|---:|---:|---| | `nvs` | `0x009000` | 512 KiB | Serial, Wi-Fi, shared admin credential, HTTPS identity, and SSH host-key data | | `otadata` | `0x089000` | 8 KiB | Active OTA-slot selection metadata | | `phy_init` | `0x08B000` | 4 KiB | Optional PHY initialization data | | `nvs_key` | `0x08C000` | 4 KiB | Reserved for future encrypted-NVS keys | | `coredump` | `0x08D000` | 128 KiB | Reserved for flash core dumps | | `ota_0` | `0x0B0000` | 4 MiB | Primary application/OTA slot | | `ota_1` | `0x4B0000` | 4 MiB | Alternate application/OTA slot | | `storage` | `0x8B0000` | 7488 KiB | Future LittleFS web assets, logs, and files | Application offsets are aligned to the ESP32-S3's required 64 KiB boundary. The final storage partition ends at `0x1000000`, exactly the end of the 16 MiB flash chip. The partition table reserves OTA and LittleFS space but does not by itself implement OTA downloads, rollback confirmation, core-dump handling, NVS encryption, or filesystem mounting. Those features will be enabled deliberately in later phases. ### One-time migration from the default partition table The previous 1 MiB factory application began at `0x10000`, which is now inside the enlarged NVS address range. A normal upload does not erase all stale bytes there. Perform a full flash erase once when first switching to this layout: ```sh pio run --target erase pio run --target upload pio device monitor -b 115200 ``` This erases the currently saved serial configuration and all other flash contents. The firmware will boot with safe serial defaults and recreate NVS. Subsequent ordinary uploads do not require another full erase. PlatformIO's application-size report should now use the 4 MiB `ota_0` slot instead of the previous 1 MiB factory partition. ## Build ```sh pio run ``` ## Upload and monitor Connect the board's **USB-to-UART** port for firmware upload and the UART0 development console, then run: ```sh pio run --target upload pio device monitor -b 115200 ``` The firmware starts an interactive console on UART0 with the prompt `serial-tool>`. Type `help` to display concise root-command descriptions. This USB-to-UART device normally appears as `/dev/ttyUSB*`; it is separate from the native USB CDC serial transport described below. The console provides line editing, history for the current session, terminal-aware cursor movement, and Tab completion. ESP-IDF supplies completion for root commands; the project extends it to nested `debug`, `serial`, `broker`, `usb`, `wifi`, `web`, and `ssh` subcommands plus safe fixed values such as AP policy and serial framing. Password values are intentionally never completion candidates. ESP-IDF normally probes terminal cursor support once while constructing the UART REPL. If the board boots without a terminal attached, that probe times out and selects dumb mode. The DevKit's USB-to-UART bridge exposes no host-open signal that firmware can monitor, and entering enhanced mode before a terminal exists would block linenoise while it waits for a cursor-position response. The project therefore preserves safe dumb mode until the first real UART byte arrives. Attach picoterm, picocom, minicom, PuTTY, or another ANSI-capable terminal and press Enter once. That empty line is consumed by the basic reader and promotes the next prompt to enhanced mode, enabling history, Delete, cursor keys, and completion without rebooting. This detects terminal activity rather than electrical USB attachment; a genuinely non-ANSI terminal is not automatically distinguishable on this hardware profile. The root-level lifecycle command is: ```text reboot ``` It acknowledges the request, waits briefly for UART output to drain, and calls the ESP-IDF software restart. RAM-only serial or Wi-Fi changes are lost unless they were persisted first with `serial save` or `wifi save`. ### Phase 1 serial service The `serial` command manages the working configuration and UART1 service: ```text serial status serial start serial stop serial set serial save serial load serial defaults serial reset serial counters serial clear-counters ``` Safe defaults are 115200 baud, 8 data bits, no parity, one stop bit, no flow control, and inactive DTR. Supported configuration values are: | Parameter | Values | |---|---| | `baud` | 110–1000000 | | `data-bits` | `7`, `8` | | `parity` | `none`, `even`, `odd` | | `stop-bits` | `1`, `2` | | `flow` | `none`, `rts-cts` | | `dtr` | `inactive`, `active`, `on-connect` | | `rts-threshold` | 1–127 bytes | `serial set` changes the working configuration and safely restarts UART1 if the service is running. It does not write flash; use `serial save` to commit the current configuration to NVS. `serial defaults` changes RAM only, while `serial reset` applies and persists defaults. The firmware never erases the shared NVS partition automatically when storage is incompatible or unavailable. The service uses independent software RX and TX streams. Calls into those streams are nonblocking, and a deasserted CTS cannot block service shutdown. UART data access is intentionally reserved for the session broker; the `serial` command controls configuration and lifecycle only. UART1 has exclusive ownership while the service runs. Phase 0 commands will refuse to touch the port until `serial stop` releases it. ### Phase 2 session broker The broker is initialized at boot and continuously drains the serial service whenever UART1 is running. It is transport-neutral: console test clients, native USB CDC, authenticated WebSocket terminals, and authenticated SSH sessions all use the same API. ```text broker status broker clients broker counters broker clear-counters broker connect broker disconnect broker request-writer broker release-writer broker force-writer broker send-hex broker read [maximum-bytes] broker events ``` Each connection receives a generation-safe numeric ID. Stale IDs from disconnected clients cannot address a newly reused slot. Up to eight clients may connect, each with a bounded 4096-byte output queue and a 16-entry event queue. UART RX is copied to every connected client. A full observer queue drops bytes only for that observer and records the loss; it never blocks UART reception or another client. With no clients, the broker still drains UART data and records it as unobserved. Exactly one client may hold the writer lease. Competing requests are denied and generate events. Administrative forced reassignment atomically revokes the old writer and grants the new one. Bytes already accepted before revocation remain queued for transmission; revocation prevents future admission rather than purging the UART TX stream. Connect, disconnect, writer grant, release, revoke, and denial events have a broker-global sequence number. Event queues are intentionally bounded, so future transports should reconcile sequence gaps against broker snapshots. The first and last broker connection also drive the Phase 1 `DTR=on-connect` policy. ### Native USB CDC-ACM transport The ESP32-S3's native USB OTG peripheral presents one CDC-ACM serial interface through the development board's connector labelled **USB**. It uses GPIO19 (`USB D-`) and GPIO20 (`USB D+`) and normally appears on Linux as `/dev/ttyACM*`. It is not the USB-to-UART bridge used for upload and logs. The UART0 development console provides these diagnostics and controls: ```text usb usb help usb status usb counters usb clear-counters usb request-writer usb release-writer ``` Both `usb` and `usb help` print the same multi-line command summary and return successfully; runtime state is shown explicitly with `usb status`. Opening the CDC port with DTR asserted automatically starts UART1, connects a broker client named `usb-cdc`, and requests the writer lease. If another client already owns the lease, USB remains connected as a read-only observer; `usb status` reports its current role. Closing the port or unplugging native USB disconnects that broker client and discards transport-local pending data. The serial service itself remains running until it is stopped explicitly with `serial stop`. The data path is binary-transparent. UTF-8 bytes, NUL bytes, terminal escape sequences, and color sequences are passed unchanged; interpretation remains the terminal application's responsibility. USB output is bounded and nonblocking, so a host that stops reading can lose only its own observer data rather than stall UART1 or another client. Host line coding is accepted for baud rates 110–1000000 with 7 or 8 data bits, none/odd/even parity, and 1 or 2 stop bits. USB's 1.5 stop bits and mark/space parity are rejected. Supported settings are applied to the working UART configuration only when USB owns the writer lease and queued UART TX has drained. They are not saved to NVS automatically; use `serial save` deliberately if the setting should survive reboot. USB RTS is reported as host status only. It does not drive the physical RS-232 RTS line, which remains controlled by UART1's configured RTS/CTS flow control. The development VID/PID comes from Espressif's TinyUSB defaults. The USB serial-number string is derived from the ESP32-S3 station MAC so multiple adapters can be distinguished consistently. #### Linux loopback validation Keep the USB-to-UART cable connected for logs and commands, and connect a second data-capable cable to the native **USB** connector. On the host, identify the new CDC device: ```sh dmesg ls -l /dev/ttyACM* ``` With power removed and no external RS-232 peer attached, connect only DE-9 pin 3 (`TX`) to pin 2 (`RX`), then power the board. Open the native port with a serial terminal such as: ```sh picocom -b 115200 /dev/ttyACM0 ``` Use the actual device path assigned by the host. Typed data should return through USB → broker → UART1 → MAX3243 loopback → broker → USB. On the UART0 console, verify `usb status`, `usb counters`, `broker clients`, and `serial status`. The USB client should normally be the writer and counters should increase without drops. For a binary check, install PySerial on the host and send all byte values: ```python import serial payload = bytes(range(256)) with serial.Serial("/dev/ttyACM0", 115200, timeout=2) as port: port.reset_input_buffer() port.write(payload) echoed = port.read(len(payload)) assert echoed == payload, (len(echoed), echoed.hex()) print("256-byte binary USB/RS-232 loopback passed") ``` Close the terminal and check `usb status` and `broker clients`; DTR-aware applications should cause the USB broker client to disconnect. Physically unplugging the native USB cable is the definitive detach test. To test observer mode, assign a console test client as writer before opening `/dev/ttyACM0`; USB should connect as an observer, receive UART output, and discard host-originated input until ownership is granted. Power down and remove the DE-9 pin 3-to-2 jumper before connecting an external serial peer. ### Wi-Fi foundation Wi-Fi is managed independently of the serial-session broker. It provides network connectivity and recovery access-point policy for the HTTPS and SSH services. The firmware does not run plaintext HTTP, DNS interception, a captive portal, NAPT, or any unauthenticated/plaintext TCP serial listener. Configuration uses four fixed station-profile slots. Lower numeric priority values are tried first, with slot number breaking ties. Profiles support WPA2/WPA3 mixed operation or require WPA3-SAE. ESP-IDF's station threshold can express “WPA2 or stronger” but not a strict WPA2-only maximum, so the configuration does not pretend to offer a distinct WPA2-only mode. Each profile attempt has a 12-second association/DHCP deadline. After all enabled profiles fail, the manager uses exponential retry delays from 2 to 60 seconds. AP policy is independent of the station profiles: | Policy | Behavior | |---|---| | `off` | Station only; never start the fallback AP | | `fallback` | Start the AP immediately when no profiles exist, or after one failed profile cycle; disable it after station connectivity has remained stable for 30 seconds | | `always` | Keep AP and station active concurrently | Fresh defaults enable Wi-Fi with `fallback` policy, AP channel 6, a MAC-suffixed SSID such as `ESP32-SAK-A1B2C3`, and a randomly generated 16-character password. The initial random credential is saved to NVS automatically when possible so it remains stable across reboot. Retrieve it deliberately from the physical UART0 administration console with `wifi ap show-secret`. The `wifi` command provides: ```text wifi status wifi profiles wifi start|stop|reconnect wifi profile set wifi profile secret wifi profile enable|disable|delete wifi ap policy wifi ap ssid wifi ap channel <1..11> wifi ap secret|show-secret wifi save|load|defaults|reset wifi counters|clear-counters wifi ping [count] wifi nslookup wifi traceroute [max-hops] ``` The network diagnostics are also registered as root aliases, so `ping`, `nslookup`, and `traceroute` are equivalent to their `wifi`-prefixed forms. `ping` accepts 1–20 probes and supports IPv4 or IPv6. `nslookup` prints unique numeric IPv4/IPv6 results. `traceroute` is currently IPv4-only, sends one ICMP Echo probe per hop, accepts 1–30 hops, and uses a one-second timeout per hop; routers that suppress ICMP replies appear as `*`. Ordinary status and profile output never displays passwords. `wifi profile secret` and `wifi ap secret` read through a dedicated no-echo UART0 prompt, keeping credentials out of the command line and its history. SSIDs containing spaces can be quoted. Profile and AP edits apply to the working RAM configuration and restart Wi-Fi asynchronously if it is running; use `wifi save` explicitly to persist them. `wifi start` and `wifi stop` also change the working `enabled-at-boot` setting, which becomes persistent only after `wifi save`. A typical station setup is: ```text wifi profile set 0 10 mixed "your SSID" wifi profile secret 0 wifi profile enable 0 wifi save wifi reconnect wifi status ``` The fallback AP uses Espressif's default `192.168.4.1/24` network for now. AP clients receive addresses through its DHCP server but are not routed to the station network. ESP32-S3 has one 2.4 GHz radio, so in AP+STA mode the AP follows the connected station's channel. Station connection attempts and scans can temporarily increase AP latency, and clients can briefly reconnect when the channel moves. Wi-Fi credentials currently reside as plaintext in the application-owned `wifi_app/config` NVS blob. Selecting `WIFI_STORAGE_RAM` prevents the ESP-IDF driver from creating a second persistent credential copy, but it does not encrypt the application's blob. The reserved `nvs_key` partition alone does not enable encryption. NVS encryption, secure boot, flash encryption, and core-dump credential exposure require a deliberate later security phase. #### Wi-Fi validation 1. Boot with no station profiles. `wifi status` should report `ap-only`, and the generated SSID should be visible from another device. 2. Use `wifi ap show-secret`, join the AP, confirm a `192.168.4.x` lease, and run `wifi ping 192.168.4.1`. The authenticated HTTPS page should be reachable at `https://192.168.4.1/`. 3. Configure and enable a WPA2/WPA3 station profile using the example above. `wifi status` should progress through `connecting`, `waiting-ip`, and `online` and display the acquired address, channel, RSSI, and negotiated authentication. 4. Reboot and verify profile and AP credential persistence. 5. Configure two profiles with different priorities, make the first unavailable, and verify failover to the second after its timeout. 6. Make all profiles unavailable and verify fallback AP startup plus increasing retry delays in `wifi status`/`wifi counters`. 7. Test `wifi ap policy always` while online and confirm both interfaces remain available; expect the AP channel to follow the station. 8. Test `wifi stop`, `wifi start`, and `wifi reconnect` while confirming UART0 and native USB serial operation remain unaffected. 9. If available, test a WPA3-only profile and a wrong password, then inspect the disconnect reason and counters. ### Phase 5 authenticated HTTPS web terminal One ESP-IDF HTTPS server listens on TCP port 443 across whichever AP and station interfaces are active. There is no plaintext port 80 listener. Phase 5A established persistent authentication, certificate management, and recovery; Phase 5B adds these local-only browser resources and transport endpoints: ```text GET / GET /api/status POST /api/ws-ticket WSS /ws/serial?ticket= GET /assets/xterm.css GET /assets/xterm.js GET /assets/addon-fit.js GET /assets/app.js ``` The page, status API, assets, and ticket endpoint require HTTP Basic authentication over TLS. `/` is now a responsive xterm.js serial workspace; `/api/status` returns JSON containing uptime plus non-secret Wi-Fi, serial-service, broker, native-USB, HTTPS, and WebSocket state/counters. xterm.js and FitAddon are pinned, vendored, compressed, and served by the ESP32 itself, so the terminal works while connected only to the fallback AP and never depends on a CDN. The terminal is constrained to the browser viewport, and fitting only resizes xterm when the host dimensions and resulting row/column count actually change; terminal rendering therefore cannot create a self-amplifying page-height loop. The document CSP permits scripts only from the device itself. xterm.js requires inline styles for its DOM renderer, but inline scripts remain prohibited. A data-URL empty favicon avoids an unnecessary authenticated `/favicon.ico` request. A CSP warning naming a UUID or browser extension despite no inline script in the served document is browser-injected content and is intentionally not hash-whitelisted by the firmware. On first boot, the device generates and persists: - username `admin` and a random 24-character Base64URL-safe password shared by HTTPS and SSH; - an ECDSA P-256 HTTPS private key; - a device-specific self-signed SHA-256 certificate valid from 2025-01-01 through 2049-12-31; - certificate SANs for `192.168.4.1` and a MAC-suffixed name such as `esp32-sak-a1b2c3.local`; - a separate ECDSA P-256 SSH host key and OpenSSH-compatible SHA-256 fingerprint. The HTTPS certificate and shared administrative credentials remain stable across ordinary reboot and OTA-slot changes until explicitly rotated. The `.local` name is included for future hostname discovery, but this phase does not yet advertise mDNS; use the AP address or the station address reported by `wifi status`. The physical UART0 administration console provides: ```text web web help web status web start|stop web counters|clear-counters web credentials show web credentials rotate --force web certificate info web certificate rotate --force web reset --force ``` `web` and `web help` print the same usage summary. `web credentials show` is the intended first-boot credential-retrieval path for both HTTPS and SSH. Rotation and reset operations write NVS immediately rather than creating RAM-only secrets. Credential rotation revokes active WebSocket and SSH sessions. Destructive operations require a literal `--force`; `web reset --force` is also the recovery path for an incompatible or damaged `web_sec/material` blob and starts HTTPS with the recovered material. Invalid stored material is never overwritten automatically, and HTTPS failure never disables UART0, native USB, the serial core, or Wi-Fi recovery. The self-signed certificate is not trusted by browsers or host tools by default. After retrieving the password, validate from a host connected to the fallback AP with: ```sh curl -k -u 'admin:YOUR_24_CHARACTER_PASSWORD' https://192.168.4.1/ curl -k -u 'admin:YOUR_24_CHARACTER_PASSWORD' https://192.168.4.1/api/status ``` A request without credentials should return `401 Unauthorized` and a `WWW-Authenticate` challenge: ```sh curl -k -i https://192.168.4.1/api/status ``` Inspect and compare the live certificate with `web certificate info`: ```sh openssl s_client -connect 192.168.4.1:443 -servername esp32-sak-device.local /dev/null \ | openssl x509 -noout -subject -issuer -dates -fingerprint -sha256 ``` Replace the example SNI name with the DNS SAN printed by `web certificate info`. SNI is not required for this single-certificate server, but supplying the device name makes the test representative of future hostname use. Repeat the fingerprint check after reboot to confirm persistence, then optionally test each explicit rotation command and verify that only the requested material changes. #### WebSocket authentication and broker behavior Browser JavaScript cannot reliably attach a Basic `Authorization` header to a WebSocket constructor. The authenticated page therefore obtains a 192-bit random, RAM-only ticket with `POST /api/ws-ticket`, then presents that ticket once in the WSS URL. The server stores only its SHA-256 digest, accepts it once within 30 seconds, binds it to the current credential generation, and creates no broker client until validation succeeds. Credential rotation invalidates outstanding tickets and closes active web-terminal and SSH sessions. ESP-IDF 5.5 sends the RFC 6455 `101 Switching Protocols` response before invoking the application WebSocket handler. Consequently, an invalid ticket receives the protocol upgrade and is then closed immediately rather than receiving an HTTP `401`; it never gains a broker session, serial output, or writer access. Strict rejection before `101` would require a framework-level pre-handshake authorization hook that ESP-IDF 5.5 does not provide. Each accepted browser becomes a normal `SESSION_BROKER_CLIENT_WEB`. Opening the first terminal starts UART1 if necessary and automatically requests the writer lease. A competing web or USB client remains a read-only observer when another client owns the lease. The page clearly reports its role and provides **Request control**, **Release control**, and **Reconnect** actions. Broker ownership remains authoritative even if a browser is stale or malicious. Serial traffic uses binary WebSocket frames. Browser input is UTF-8 encoded and split into at most 1024-byte frames; output is drained in at most 512-byte frames. Each web session permits only one queued/in-flight TLS frame. If a browser stops reading, its own 4096-byte broker observer queue eventually drops data without blocking UART reception, USB, or another broker observer. ESP-IDF performs TLS sends on one shared HTTP task, so a slow TLS peer can delay other HTTPS work for at most the configured one-second socket timeout; this is bounded rather than absolute per-socket isolation. A direct ticket diagnostic is available without exposing the ticket in firmware logs: ```sh curl -k -u 'admin:YOUR_24_CHARACTER_PASSWORD' -X POST https://192.168.4.1/api/ws-ticket ``` For end-to-end validation: 1. Open `https://192.168.4.1/`, accept the device certificate warning, and authenticate as `admin`. 2. Confirm xterm.js loads without Internet access and the page reaches **Connected / Writer** when no other writer exists. 3. Send text, terminal escape sequences, UTF-8, and pasted input through an RS-232 loopback or peer; verify exact traffic through `web counters`, `broker clients`, and serial counters. 4. Open a second browser/private session. It should connect as an observer, receive the same UART output, and keep terminal input disabled. 5. Release control in the first browser, request it in the second, and verify the role badges, broker writer ID, and actual serial input ownership change together. 6. Open native USB while a web writer exists, then repeat with USB owning the lease. Confirm each losing transport remains an observer and cannot inject bytes. 7. Close/reload a browser and verify its broker client disappears, the writer lease is released when applicable, and reconnect uses a fresh ticket. 8. Run `web credentials rotate --force`; existing browsers should disconnect and old credentials must no longer mint tickets. 9. Exercise `web stop`, `web start`, and reboot while confirming UART0/native USB recovery remains available and no stale web broker clients survive. Vendored browser sources, versions, hashes/provenance, deterministic gzip artifacts, and MIT license notices are recorded under [`web_assets/`](web_assets/SOURCES.md). Third-party code remains under its upstream license; project firmware code remains GPL-3.0-only. HTTPS permits up to six simultaneous client sockets: two bounded persistent WebSocket terminals plus parallel browser asset, ticket, and status requests. ESP-IDF documents approximately 40 KiB per active TLS socket, so this is a concurrency ceiling rather than preallocated per-socket memory. WebSocket serial sessions themselves remain fixed at two. To preserve internal DRAM during concurrent handshakes, the firmware configures ESP-IDF's mbedTLS allocator for the board's external PSRAM. Basic authentication is acceptable here only because plaintext HTTP is disabled. It is an initial administration mechanism, not the final authorization design. **Current security limitation:** the shared admin password and HTTPS ECDSA private key are stored as plaintext in the application-owned `web_sec/material` NVS blob, the SSH ECDSA private key is plaintext in `ssh_sec/material`, and Wi-Fi credentials are plaintext in `wifi_app/config`. The reserved `nvs_key` partition does not activate NVS encryption. ESP-IDF 5.5 keeps active mbedTLS allocations in external PSRAM under this memory configuration; wolfSSL/wolfSSH allocations also prefer PSRAM with internal-memory fallback. Neither framework guarantees complete zeroization of released session allocations, and PSRAM encryption is not enabled. Do not treat the current firmware as resistant to physical flash or RAM extraction; NVS encryption, flash/PSRAM encryption, secure boot, protected OTA, secret-aware core-dump handling, and framework-level key zeroization belong to the later hardening phase. ### Phase 6 authenticated SSH serial transport A wolfSSH server listens on TCP port 22 across whichever Wi-Fi interfaces are active. It uses the same `admin` username and 24-character password as HTTPS, but has a separate persistent ECDSA P-256 host key in `ssh_sec/material`. The SSH identity is deliberately independent of the HTTPS certificate key so certificate rotation does not unexpectedly invalidate SSH `known_hosts` entries. The UART0 administration console provides: ```text ssh ssh help ssh status ssh start|stop ssh sessions ssh disconnect ssh counters|clear-counters ssh host-key info ssh host-key rotate --force ssh reset --force ``` `ssh` and `ssh help` print the same usage summary. `ssh host-key info` prints the OpenSSH-style `SHA256:...` fingerprint over the standard `ecdsa-sha2-nistp256` public-key wire blob. `ssh host-key rotate --force` replaces a valid key; `ssh reset --force` explicitly replaces missing, incompatible, or corrupt SSH material. Both operations persist immediately, stop active SSH sessions before changing identity, and restart the service when appropriate. After deliberate rotation, remove the old host entry on the client with `ssh-keygen -R
` and verify the new fingerprint before reconnecting. Only password authentication and an interactive shell/PTY channel are accepted. Public-key user authentication, arbitrary `exec`, subsystem requests, SFTP, SCP, agent forwarding, and TCP forwarding are not provided. Authentication is bounded to three password attempts per connection and a 15-second handshake deadline. At most two total SSH sessions or in-progress handshakes are admitted at once. Two deliberately stalled clients can occupy both fixed slots until their deadlines, so these bounds limit resource consumption but do not prevent availability attacks. This is useful embedded admission control, not a substitute for network filtering, strong unique credentials, monitoring, or mature brute-force protection. After authentication and shell negotiation, the channel becomes a binary-transparent serial byte stream. The firmware does not inject prompts, status messages, writer-control escapes, line handling, or terminal emulation into channel data. SSH framing and encryption terminate at the ESP32; bytes between the SSH channel and session broker are retained across partial nonblocking transfers. Each admitted shell becomes a `SESSION_BROKER_CLIENT_SSH`. The first session opportunistically requests the writer lease; a later session remains an observer if USB, WebSocket, a test client, or another SSH session already owns it. Observers receive UART output but their input is discarded. SSH deliberately has no in-band writer-control sequence because any reserved byte sequence would break binary transparency. Inspect ownership with `ssh sessions` or `broker clients`, and use the physical UART0 `broker force-writer ` recovery command when administrative reassignment is required. Before connecting for the first time: 1. Run `web credentials show` on UART0 and keep the password private. 2. Run `ssh host-key info` and record the exact `SHA256:...` fingerprint. 3. Obtain the AP or station address from `wifi status`. Then connect with OpenSSH, forcing the implemented authentication method if the host has unrelated keys configured: ```sh ssh -o PreferredAuthentications=password -o PubkeyAuthentication=no admin@192.168.4.1 ``` Compare OpenSSH's first-connection ECDSA fingerprint with `ssh host-key info` before accepting it. Once connected, all terminal bytes go directly to the physical RS-232 session. OpenSSH may print a one-time pre-authentication device banner; this is SSH protocol metadata and is not inserted into the serial stream. The wolfSSH runtime has one owner task and two fixed session slots. A single owner serializes the managed component's `SINGLE_THREADED` build, avoids one large crypto stack per client, and services both nonblocking sessions fairly. The task has a 20 KiB internal stack; wolfSSL/wolfSSH dynamic allocations prefer external PSRAM and fall back to internal 8-bit memory. WolfCrypt's seed callback is installed after `wolfSSH_Init()` and routes all SSH RNG seeding through the project's serialized pre-radio CTR_DRBG instead of the registry component's default post-radio `esp_random()` path. HTTPS remains on ESP-IDF mbedTLS and is not switched to wolfSSL. The official Espressif registry baseline is pinned in `src/idf_component.yml` and `dependencies.lock`: ```text wolfssl/wolfssl 5.8.2~1 wolfssl/wolfssh 1.4.20 ``` The build enables `CONFIG_ESP_ENABLE_WOLFSSH`, keeps `CONFIG_ESP_TLS_USING_MBEDTLS`, and raises `CONFIG_LWIP_MAX_SOCKETS` to 16 for HTTPS/WebSocket and SSH concurrency. Adding the linked SSH implementation increased the measured release image from approximately 29.3% to 33.9% of the 4 MiB OTA slot and static RAM from 17.5% to 18.5% of 320 KiB. Runtime task stacks, Wi-Fi/TLS state, and PSRAM allocations are not fully represented by the static RAM percentage. #### SSH validation 1. Boot and confirm `ssh status` reports `running=yes`, TCP port 22, password authentication, and no sessions. 2. Compare the first OpenSSH host-key prompt exactly with `ssh host-key info`; disconnect if it differs. 3. Verify a wrong password fails and the shared password from `web credentials show` succeeds. 4. Exercise text, NUL-containing/binary payloads, UTF-8, ANSI color, cursor-control sequences, and a full-screen terminal application through an RS-232 loopback or peer. 5. Confirm `ssh sessions`, `broker clients`, `ssh counters`, and serial counters reflect traffic and cleanup. 6. Connect a second SSH client. It should authenticate as an observer, receive identical UART output, and be unable to inject input while the first owns the writer lease. 7. Test ownership against native USB and WebSocket clients, using UART0 `broker force-writer` for deterministic reassignment. 8. Run `ssh disconnect ` and verify the socket and broker client disappear without affecting another observer. 9. Leave an unauthenticated TCP/SSH client stalled and verify its slot closes after 15 seconds while an established session continues. 10. Run `web credentials rotate --force`; active SSH clients should disconnect and the old password should fail. 11. Run `ssh host-key rotate --force`, remove the old client entry, and verify the newly printed fingerprint persists across reboot. 12. Exercise `ssh stop`, `ssh start`, Wi-Fi reconnect, and reboot while confirming UART0/native USB recovery remains available and no stale SSH broker clients survive. ### Phase 0 diagnostics The top-level `status` command retains quick MAX3243 signal-state inspection. Potentially disruptive hardware-characterization operations are grouped below `debug` so the primary help page stays concise: ```text status debug transceiver debug drivers debug loopback-a debug loopback-b debug valid-test debug uart-loopback [8N1|8E1|8O1|8N2|7E1|7O1] [bytes] debug uart-suite debug cts-flow-test debug rts-flow-test ``` Run `debug` without a subcommand for its usage summary. `debug uart-loopback` defaults to `8N1` and 256 bytes. Its accepted payload range is 1–512 bytes. `debug uart-suite` covers 300 through 250000 baud and all supported frame formats. `debug cts-flow-test` verifies transmit gating and exact resumption, while `debug rts-flow-test` uses UART2 as an internal traffic generator to verify automatic receive backpressure. Follow the command-specific loopback wiring in [`wiring.md`](wiring.md) before invoking any test. A mutex-protected port lease prevents diagnostics, UART1 service startup, and future clients from reconfiguring the same GPIOs concurrently. If a UART driver cannot be removed during cleanup, the firmware keeps the MAX3243 shut down and marks the port faulted until reboot rather than exposing an ambiguous hardware state. The onboard RGB LED reports the most recent test-harness state: | Color | Meaning | |---|---| | Blue | Idle; waiting for a command | | Yellow/orange | Test running | | Green | Last test passed | | Red | Last test failed | This hardware profile uses the onboard RGB LED on GPIO48. Official ESP32-S3-DevKitC-1 v1.1 boards commonly use GPIO38 instead, and compatible boards or clones may vary. A different board revision requires an adjusted board pin profile before running this firmware. ## License This project is licensed under the [GNU General Public License version 3 only](LICENSE) (`GPL-3.0-only`). Phase 6 pins the official Espressif registry components `wolfssl/wolfssl` 5.8.2~1 and `wolfssl/wolfssh` 1.4.20. Their GPL releases are compatible with this project; third-party components remain subject to their respective licenses. The wolfSSH 1.4.20 managed archive contains stale GPLv2-or-later wording in `LICENSE.txt` while upstream wolfSSH source headers identify GPLv3-or-later. Both are GPLv3-compatible, but distributors should preserve the upstream notices and re-check the registry package's license metadata. These registry versions are an integration baseline rather than a permanent security pin and must be reviewed against current upstream wolfSSL/wolfSSH releases during production hardening.