diff --git a/esphome/atorch-ble-proxy.yaml b/esphome/atorch-ble-proxy.yaml
new file mode 100644
index 0000000..636ca97
--- /dev/null
+++ b/esphome/atorch-ble-proxy.yaml
@@ -0,0 +1,141 @@
+substitutions:
+  name: "dc-load"
+  friendly_name: Atorch programmable DC load
+  external_components_source: github://syssi/esphome-atorch-dl24@main
+  dl24_mac_address: !secret dl24_mac_address
+  project_version: 2.1.0
+  device_description: "Monitor and control a Atorch meter via bluetooth BLE"
+
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  comment: ${device_description}
+  min_version: 2024.6.0
+  project:
+    name: "syssi.esphome-atorch-dl24"
+    version: ${project_version}
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: esp-idf
+
+external_components:
+  - source: ${external_components_source}
+    refresh: 0s
+
+# Enable logging
+logger:
+  level: DEBUG
+
+# Enable Home Assistant API
+api:
+  encryption: 
+    key: !secret apikey
+
+# Enable over-the-air updates
+ota:
+  platform: esphome
+  password: !secret ota
+
+wifi:
+  ssid: "Voltage-legacy"
+  password: !secret voltage_legacy_psk
+  use_address: ${name}.home  
+  power_save_mode: high
+  fast_connect: on
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "DC-Load Fallback Hotspot"
+    password: !secret fallback_psk
+
+captive_portal:
+
+#esp32_ble_tracker:
+#  scan_parameters:
+#    active: true
+#  on_ble_advertise:
+#    then:
+#      - lambda: |-
+#          if (x.get_name().rfind("-BLE", 0) == 0) {
+#            ESP_LOGI("ble_adv", "New Atorch device found");
+#            ESP_LOGI("ble_adv", "  Name: %s", x.get_name().c_str());
+#            ESP_LOGI("ble_adv", "  MAC address: %s", x.address_str().c_str());
+#            ESP_LOGD("ble_adv", "  Advertised service UUIDs:");
+#            for (auto uuid : x.get_service_uuids()) {
+#              ESP_LOGD("ble_adv", "    - %s", uuid.to_string().c_str());
+#            }
+#          }
+#
+#text_sensor:
+#  - platform: ble_scanner
+#    name: "BLE Devices Scanner"
+
+esp32_ble_tracker:
+  scan_parameters:
+    active: False
+
+ble_client:
+  - mac_address: ${dl24_mac_address}
+    id: ble_client0
+
+atorch_dl24:
+  - id: atorch0
+    ble_client_id: ble_client0
+    check_crc: false
+    # The meter publishes a status report per second via BLE notification. If you don't like this update interval
+    # you can use this setting to throttle the sensor updates by skipping some status reports.
+    throttle: 0s
+
+binary_sensor:
+  - platform: atorch_dl24
+    atorch_dl24_id: atorch0
+    running:
+      name: "${name} running"
+
+sensor:
+  - platform: atorch_dl24
+    atorch_dl24_id: atorch0
+    voltage:
+      name: "${name} voltage"
+    current:
+      name: "${name} current"
+    power:
+      name: "${name} power"
+    capacity:
+      name: "${name} capacity"
+    energy:
+      name: "${name} energy"
+    temperature:
+      name: "${name} temperature"
+    dim_backlight:
+      name: "${name} dim backlight"
+    runtime:
+      name: "${name} runtime"
+
+text_sensor:
+  - platform: atorch_dl24
+    atorch_dl24_id: atorch0
+    runtime_formatted:
+      name: "${name} runtime formatted"
+
+button:
+  - platform: atorch_dl24
+    atorch_dl24_id: atorch0
+    reset_energy:
+      name: "${name} reset energy"
+    reset_capacity:
+      name: "${name} reset capacity"
+    reset_runtime:
+      name: "${name} reset runtime"
+    reset_all:
+      name: "${name} reset all"
+    usb_plus:
+      name: "${name} plus"
+    usb_minus:
+      name: "${name} minus"
+    setup:
+      name: "${name} setup"
+    enter:
+      name: "${name} enter"
diff --git a/esphome/m5stack-atom-echo.yaml b/esphome/m5stack-atom-echo.yaml
index b796fe3..037bc34 100644
--- a/esphome/m5stack-atom-echo.yaml
+++ b/esphome/m5stack-atom-echo.yaml
@@ -15,6 +15,8 @@ esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
+    version: 4.4.8
+    platform_version: 5.4.0
 
 # Enable Home Assistant API
 api: