substitutions:
  name: kamera-balkon
  friendly_name: Kamera Balkon

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: false
  project:
    name: sensor.camera
    version: "1.0"
  min_version: 2022.1.0

esp32:
  board: esp32cam
  framework:
    type: arduino

wifi:
  ssid: "Voltage-legacy"
  password: !secret voltage_legacy_psk
  # use_address: cam-balcony.home  
  power_save_mode: high
  fast_connect: on

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Cam Balkon Fallback Hotspot"
    password: !secret fallback_psk

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption: 
    key: !secret apikey

ota:
  platform: esphome
  password: !secret ota

# Initialize I²C
i2c:
  - id: bus_a
    sda: GPIO13
    scl: GPIO14
    scan: true
  - id: bus_c
    sda: GPIO26
    scl: GPIO27

# Camera
esp32_camera:
  name: ${friendly_name}
  external_clock:
    pin: GPIO0
    frequency: 20MHz
  i2c_id:
    bus_c
  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
  vsync_pin: GPIO25
  href_pin: GPIO23
  pixel_clock_pin: GPIO22
  power_down_pin: GPIO32
  resolution: SVGA
  max_framerate: 24 fps
  idle_framerate: 0.2 fps
  jpeg_quality: 30
  agc_mode: auto
  agc_gain_ceiling: 2x
  wb_mode: auto
  vertical_flip: true
  horizontal_mirror: true

esp32_camera_web_server:
  - port: 8080
    mode: stream
  - port: 8081
    mode: snapshot

# Temp/humidity sensors
sensor:
  - platform: wifi_signal
    name: "WiFi Signalstärke"
    update_interval: 60s
  - platform: sht3xd
    i2c_id:
      bus_a
    temperature:
      name: "Balkon Temperatur"
      filters:
        - offset: -4.4
    humidity:
      name: "Balkon Luftfeuchtigkeit"
    address: 0x44
    heater_enabled: True
    update_interval: 60s

# Flash LED
output:
- platform: ledc
  pin: GPIO4
  id: flash
  channel: 2

# Define RGB mode for LED
light:
  - platform: monochromatic
    id: flashlight
    name: "Blitzlicht"
    output: flash