substitutions:
  name: "dc-load"
  friendly_name: Atorch programmable DC load
  external_components_source: github://syssi/esphome-atorch-dl24@main
  dl24_mac_address: !secret dl24_mac_address
  project_version: 2.1.0
  device_description: "Monitor and control a Atorch meter via bluetooth BLE"

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  comment: ${device_description}
  min_version: 2024.6.0
  project:
    name: "syssi.esphome-atorch-dl24"
    version: ${project_version}

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

external_components:
  - source: ${external_components_source}
    refresh: 0s

# Enable logging
logger:
  level: DEBUG

# Enable Home Assistant API
api:
  encryption: 
    key: !secret apikey

# Enable over-the-air updates
ota:
  platform: esphome
  password: !secret ota

wifi:
  ssid: "Voltage-legacy"
  password: !secret voltage_legacy_psk
  use_address: ${name}.home  
  power_save_mode: high
  fast_connect: on

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "DC-Load Fallback Hotspot"
    password: !secret fallback_psk

captive_portal:

#esp32_ble_tracker:
#  scan_parameters:
#    active: true
#  on_ble_advertise:
#    then:
#      - lambda: |-
#          if (x.get_name().rfind("-BLE", 0) == 0) {
#            ESP_LOGI("ble_adv", "New Atorch device found");
#            ESP_LOGI("ble_adv", "  Name: %s", x.get_name().c_str());
#            ESP_LOGI("ble_adv", "  MAC address: %s", x.address_str().c_str());
#            ESP_LOGD("ble_adv", "  Advertised service UUIDs:");
#            for (auto uuid : x.get_service_uuids()) {
#              ESP_LOGD("ble_adv", "    - %s", uuid.to_string().c_str());
#            }
#          }
#
#text_sensor:
#  - platform: ble_scanner
#    name: "BLE Devices Scanner"

esp32_ble_tracker:
  scan_parameters:
    active: False

ble_client:
  - mac_address: ${dl24_mac_address}
    id: ble_client0

atorch_dl24:
  - id: atorch0
    ble_client_id: ble_client0
    check_crc: false
    # The meter publishes a status report per second via BLE notification. If you don't like this update interval
    # you can use this setting to throttle the sensor updates by skipping some status reports.
    throttle: 0s

binary_sensor:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    running:
      name: "${name} running"

sensor:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    voltage:
      name: "${name} voltage"
    current:
      name: "${name} current"
    power:
      name: "${name} power"
    capacity:
      name: "${name} capacity"
    energy:
      name: "${name} energy"
    temperature:
      name: "${name} temperature"
    dim_backlight:
      name: "${name} dim backlight"
    runtime:
      name: "${name} runtime"

text_sensor:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    runtime_formatted:
      name: "${name} runtime formatted"

button:
  - platform: atorch_dl24
    atorch_dl24_id: atorch0
    reset_energy:
      name: "${name} reset energy"
    reset_capacity:
      name: "${name} reset capacity"
    reset_runtime:
      name: "${name} reset runtime"
    reset_all:
      name: "${name} reset all"
    usb_plus:
      name: "${name} plus"
    usb_minus:
      name: "${name} minus"
    setup:
      name: "${name} setup"
    enter:
      name: "${name} enter"