pdu_power_sequence/pdu_power_sequence.ino

39 lines
832 B
C++

#include <avr/interrupt.h>
#include <avr/sleep.h>
// Define relais pins
#define relaisPin_1 12
#define relaisPin_2 13
void setup() {
Serial.begin(9600); // open the serial port at 9600 bps
pinMode(relaisPin_1, OUTPUT);
pinMode(relaisPin_2, OUTPUT);
Serial.println("Hello!");
}
void loop() {
delay(2000); // Wait for 2 seconds
Serial.println("Enable power rail #1");
digitalWrite(relaisPin_1, HIGH); // Poweron relais #1
delay(2000);
Serial.println("Enable power rail #2");
digitalWrite(relaisPin_2, HIGH); // Poweron relais #2
delay(50); // wait for UART to finish
stop();
}
void stop() {
// Turn microcontroller off
Serial.println("All done, powering off. Goodbye.");
delay(100); // wait for UART to finish
set_sleep_mode(SLEEP_MODE_PWR_DOWN);
cli();
sleep_mode();
}