# radiation tagger

exif_rad.py is a simple unix-style cross-platform Python 3 tool which can write certain tags to an image file.

It can scan a couple of images, extract their Exif-tags, and compare the `DateTimeOriginal` with other sources.

By now it can parse a .his (CSV) file from a [GeigerLog](https://sourceforge.net/projects/Geigerlog/) file export and calculate the radiation in µS/h using the factor in `SIFACTOR`.

It then creates a `UserComment` Exif tag with the actual measured radiation at the time the photo has been taken.

## Dependencies
Right now it depends on the following non-core Python 3 libraries:

  * [py3exiv2](https://pypi.org/project/py3exiv2/) A Python 3 binding to the library exiv2.
  * [boost.python3](http://www.boost.org/libs/python/doc/index.html) Welcome to Boost.Python, a C++ library which enables seamless interoperability between C++ and the Python programming language.
  * [exiv2](http://www.exiv2.org/) Exiv2 is a Cross-platform C++ library and a command line utility to manage image metadata.

## Requirements
  * GeigerCounter log file in csv format as it is being exported by the software GeigerLog. 
  * A bunch of images (jpg, cr2, etc.) with its time of creation stored in `DateTimeOriginal`

All sources are matched by their timestamp, so all sources have to be recorded during the same time (and timezone). The Geiger counter has to log a value every second, as the script compares the timestamps exactly.

These exported .his files look like this:

```
# ID  , time in isoformat  ,    CP/M,    CP/S
149654, 2020-02-27 05:12:42,    13.0,     0.0
```

## Usage

```
usage: exif_rad.py [-h] [-si SIFACTOR] [-o OUTDIR] CSV Photo [Photo ...]

A tool that writes radiation levels (and optionally geocoordinates) to image
files and extracts the infos from external sources.

positional arguments:
  CSV                   Geiger counter history file in CSV format.
  Photo                 One or multiple photo image files to process.

optional arguments:
  -h, --help            show this help message and exit
  -si SIFACTOR, --sifactor SIFACTOR
                        Factor to multiply recorded CPM with. (default:
                        0.0065)
  -o OUTDIR, --outdir OUTDIR
                        Directory to output processed photos (default: .)
```

### Examples
Use test.hisdb.his from current working dir and modify (overwrite) all .CR2 files in place.

```
./exif_rad.py test.hisdb.his *.CR2
Modifying photos in place (overwrite)
filename        date / time          Exif UserComment
DSC_0196.JPG    2020-03-03 18:33:33  NOT FOUND!
DSC_0197.JPG    2020-03-03 20:14:18  Radiation ☢ 0.15 µS/h
DSC_0198.JPG    2020-03-03 22:18:13  Radiation ☢ 0.07 µS/h
```

Use test.hisdb.his in folder 'testdata', read all .JPG files from 'testsource' and write them to 'testdest'.

```
./exif_rad.py testdata/test.hisdb.his -o testdest/ testsource/*.JPG
Modifying photos in testdest/ (copy)
filename        date / time          Exif UserComment
DSC_0196.JPG    2020-03-03 18:33:33  NOT FOUND!
DSC_0197.JPG    2020-03-03 20:14:18  Radiation ☢ 0.15 µS/h
DSC_0198.JPG    2020-03-03 22:18:13  Radiation ☢ 0.07 µS/h
```

## GeigerLog setup

The Software is Open-Source and can be downloaded from [Sourceforge](https://sourceforge.net/projects/Geigerlog/).

### Configure GeigerLog to use the GMC-Geiger counter

The GMC device has to be enabled in the `geigerlog.cfg` which is located in the main program directory. Because GS (GammaScout) is preactivated, it can be disabled, while you want to enable GMC

```
GSActivation = no
GMCActivation = yes
```

The GMC* defaults are quite sane, but you might want to set the correct serial port:

`usbport   = /dev/ttyUSB0`

### Using GeigerLog to download history

Now the program can be started by double-clicking `geigerlog` or by executing `./geigerlog` on the command prompt.
Once connected to the device (in any power state) by pressing 'Ctrl+C' , you can download the history ('History' -> 'GMC Series' -> 'Get History from Device'). You will be asked to choose a filename for the hisdb-file (SQLITE format).

GeigerLog now presents you a rendering of the radiation over time in its main window:

![alt text][main_window]

[main_window]: images/geigerlog_main_window.png "GeigerLog Main Window with graph"

Once imported, you can export the history into a hisdb.his-file, which is basically the CSV-file `exif_rad.py` can process. Choose 'History' -> Save History Data into .his file (CSV)'.


## future possibilities

  * In the future it should also be able to do the same with a gpx-file to extract geolocations and to write them into the appropiate Exif-fields.
  * It might get a setup.py if I want to waste my time on it.
  * I might want to get rid of the requirement to use a bloated GUI application to download the history data off the Geigercounter. There must be a neat working command line tool. Maybe I'll write it myself.