homeassistant-config/esphome/riden-labornetzteil.yaml

506 lines
13 KiB
YAML
Raw Normal View History

2023-11-06 23:22:06 +01:00
substitutions:
name: "riden-labornetzteil"
friendly_name: "Riden Labornetzteil"
# Change this model to fit your particular one.
# You can find it in Home Assistant as the device diagnostic "Model Name".
model: "RD6018"
device_name: "rd6018-controller"
device_friendly_name: "Riden RD6018"
device_description: "Labornetzteil"
time_timezone: "Europe/Berlin"
# Model specific settings (Don't change these!)
RD6006_voltage_maximum: "60"
RD6006_voltage_accuracy: "2"
RD6006_voltage_multiplier: "0.01"
RD6006_current_maximum: "6"
RD6006_current_accuracy: "3"
RD6006_current_multiplier: "0.001"
RD6006P_voltage_maximum: "60"
RD6006P_voltage_accuracy: "3"
RD6006P_voltage_multiplier: "0.001"
RD6006P_current_maximum: "6"
RD6006P_current_accuracy: "4"
RD6006P_current_multiplier: "0.0001"
RD6012_voltage_maximum: "60"
RD6012_voltage_accuracy: "2"
RD6012_voltage_multiplier: "0.01"
RD6012_current_maximum: "12"
RD6012_current_accuracy: "2"
RD6012_current_multiplier: "0.01"
RD6018_voltage_maximum: "60"
RD6018_voltage_accuracy: "2"
RD6018_voltage_multiplier: "0.01"
RD6018_current_maximum: "18"
RD6018_current_accuracy: "2"
RD6018_current_multiplier: "0.01"
esphome:
name: $device_name
friendly_name: $device_friendly_name
comment: $device_description
name_add_mac_suffix: false
project:
name: "wildekek.rd6006-controller"
version: "1.4.1"
esp8266:
board: esp12e
wifi:
ssid: "Voltage-legacy"
password: !secret voltage_legacy_psk
use_address: riden-labornetzteil.home
power_save_mode: high
fast_connect: on
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "RD6018 Fallback Hotspot"
password: !secret fallback_psk
captive_portal:
# Enable logging
logger:
level: INFO
# Disable logging via UART, since we're using this for modbus communication
baud_rate: 0
# Enable Home Assistant API
api:
encryption:
key: !secret apikey
ota:
password: !secret ota
# Enable status LED
status_led:
pin:
number: GPIO2
inverted: true
uart:
id: mod_bus
tx_pin: GPIO1
rx_pin: GPIO3
baud_rate: 115200
data_bits: 8
stop_bits: 1
parity: none
modbus:
id: modbus1
modbus_controller:
- id: powersupply
## This address should be set to the "Address" value in the config menu
address: 0x01
modbus_id: modbus1
setup_priority: -10
update_interval: 5s
time:
# Get the time from HA, so we can use it for uptime
- platform: homeassistant
id: time_homeassistant
timezone: "${time_timezone}"
on_time_sync:
- logger.log: Time has been set and is valid!
- component.update: sensor_uptime_timestamp
- number.set:
id: date_year
value: !lambda return id(time_homeassistant).now().year;
- number.set:
id: date_month
value: !lambda return id(time_homeassistant).now().month;
- number.set:
id: date_day
value: !lambda return id(time_homeassistant).now().day_of_month;
- number.set:
id: date_hour
value: !lambda return id(time_homeassistant).now().hour;
- number.set:
id: date_minute
value: !lambda return id(time_homeassistant).now().minute;
- number.set:
id: date_second
value: !lambda return id(time_homeassistant).now().second;
sensor:
- platform: modbus_controller
id: model_number
name: "Model Number"
entity_category: diagnostic
disabled_by_default: True
modbus_controller_id: powersupply
address: 0
skip_updates: 10
unit_of_measurement: ""
register_type: holding
value_type: U_WORD
accuracy_decimals: 0
on_value:
then:
- lambda: |-
id(model_name).publish_state(value_accuracy_to_string(x, 0));
- platform: modbus_controller
name: "Serial Number"
entity_category: diagnostic
disabled_by_default: True
modbus_controller_id: powersupply
address: 1
skip_updates: 10
register_type: holding
value_type: U_DWORD
accuracy_decimals: 0
- platform: modbus_controller
modbus_controller_id: powersupply
address: 3
name: "Firmware version"
entity_category: diagnostic
disabled_by_default: True
unit_of_measurement: ""
register_type: holding
value_type: U_WORD
accuracy_decimals: 2
filters:
- multiply: 0.01
- platform: modbus_controller
modbus_controller_id: powersupply
address: 10
name: "Output voltage"
device_class: voltage
state_class: measurement
unit_of_measurement: "V"
register_type: holding
value_type: U_WORD
accuracy_decimals: ${${model}_voltage_accuracy}
filters:
- multiply: ${${model}_voltage_multiplier}
- platform: modbus_controller
modbus_controller_id: powersupply
address: 11
name: "Output current"
device_class: current
state_class: measurement
unit_of_measurement: "A"
register_type: holding
value_type: U_WORD
accuracy_decimals: ${${model}_current_accuracy}
filters:
- multiply: ${${model}_current_multiplier}
- platform: modbus_controller
modbus_controller_id: powersupply
address: 12
name: "Output Power"
device_class: power
state_class: measurement
unit_of_measurement: "W"
register_type: holding
value_type: U_DWORD
accuracy_decimals: 2
filters:
- multiply: 0.01
- platform: modbus_controller
modbus_controller_id: powersupply
address: 33
name: "Battery voltage"
device_class: voltage
state_class: measurement
unit_of_measurement: "V"
register_type: holding
value_type: U_WORD
accuracy_decimals: ${${model}_voltage_accuracy}
filters:
- multiply: ${${model}_voltage_multiplier}
- platform: modbus_controller
modbus_controller_id: powersupply
address: 38
name: "Battery charge"
device_class: "energy_storage"
state_class: measurement
unit_of_measurement: "Ah"
icon: "mdi:battery-60"
register_type: holding
value_type: U_DWORD
accuracy_decimals: 3
filters:
- multiply: 0.001
- platform: modbus_controller
modbus_controller_id: powersupply
address: 40
name: "Battery energy"
device_class: "energy_storage"
state_class: measurement
unit_of_measurement: "Wh"
icon: "mdi:battery-60"
register_type: holding
value_type: U_DWORD
accuracy_decimals: 3
filters:
- multiply: 0.001
- platform: modbus_controller
modbus_controller_id: powersupply
address: 14
name: "Input voltage"
device_class: voltage
unit_of_measurement: "V"
register_type: holding
value_type: U_WORD
accuracy_decimals: ${${model}_voltage_accuracy}
filters:
- multiply: ${${model}_voltage_multiplier}
- platform: modbus_controller
name: "Temperature"
device_class: temperature
state_class: measurement
modbus_controller_id: powersupply
register_type: holding
address: 4
value_type: S_DWORD
unit_of_measurement: "°C"
- platform: modbus_controller
name: "Temperature external"
state_class: measurement
modbus_controller_id: powersupply
register_type: holding
address: 34
value_type: S_DWORD
device_class: temperature
unit_of_measurement: "°C"
- platform: wifi_signal
name: "Wi-Fi Signal"
disabled_by_default: True
update_interval: 60s
# Uptime is used internally only
- platform: uptime
id: sensor_uptime
# This sensor is an alternative for the uptime sensor, which only sends the
# startup timestamp of the device to home assistant once
- platform: template
id: sensor_uptime_timestamp
name: "Uptime"
entity_category: diagnostic
device_class: "timestamp"
accuracy_decimals: 0
update_interval: never
lambda: |-
static float timestamp = (
id(time_homeassistant).utcnow().timestamp - id(sensor_uptime).state
);
return timestamp;
text_sensor:
- platform: wifi_info
ip_address:
name: "IP Address"
disabled_by_default: True
ssid:
name: "Wi-Fi SSID"
disabled_by_default: True
bssid:
name: "Wi-Fi BSSID"
disabled_by_default: True
- platform: template
id: model_name
name: "Model Name"
entity_category: diagnostic
# Updated by model number
update_interval: never
filters:
- map:
- 60062 -> RD6006
- 60065 -> RD6006P
- 60121 -> RD6012
- 60181 -> RD6018
binary_sensor:
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Keypad lock"
entity_category: diagnostic
device_class: lock
address: 15
register_type: holding
bitmask: 0x1
filters:
- invert:
- platform: modbus_controller
modbus_controller_id: powersupply
address: 32
name: "Battery mode"
device_class: connectivity
register_type: holding
bitmask: 0x1
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Over Voltage Protection"
device_class: problem
address: 16
register_type: holding
bitmask: 0x1
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Over Current Protection"
device_class: problem
address: 16
register_type: holding
bitmask: 0x2
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Constant Voltage"
address: 17
register_type: holding
bitmask: 0x1
filters:
- invert:
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Constant Current"
address: 17
register_type: holding
bitmask: 0x1
number:
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Backlight"
icon: "mdi:lightbulb"
entity_category: config
address: 72
value_type: U_WORD
min_value: 0
max_value: 5
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Output voltage"
device_class: voltage
unit_of_measurement: "V"
entity_category: config
address: 8
value_type: U_WORD
min_value: 0
max_value: ${${model}_voltage_maximum}
step: ${${model}_voltage_multiplier}
lambda: !lambda return x * ${${model}_voltage_multiplier};
write_lambda: !lambda return x * (1/${${model}_voltage_multiplier});
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Output current"
device_class: current
unit_of_measurement: "A"
entity_category: config
address: 9
value_type: U_WORD
min_value: 0
max_value: ${${model}_current_maximum}
step: ${${model}_current_multiplier}
lambda: !lambda return x * ${${model}_current_multiplier};
write_lambda: !lambda return x * (1/${${model}_current_multiplier});
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Over Voltage Protection"
device_class: voltage
unit_of_measurement: "V"
address: 82
entity_category: config
value_type: U_WORD
min_value: 0
max_value: ${${model}_voltage_maximum}
step: ${${model}_voltage_multiplier}
lambda: !lambda return x * ${${model}_voltage_multiplier};
write_lambda: !lambda return x * (1/${${model}_voltage_multiplier});
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Over Current Protection"
device_class: current
unit_of_measurement: "A"
address: 83
entity_category: config
value_type: U_WORD
min_value: 0
max_value: ${${model}_current_maximum}
step: ${${model}_current_multiplier}
lambda: !lambda return x * ${${model}_current_multiplier};
write_lambda: !lambda return x * (1/${${model}_current_multiplier});
# Date components are kept internal
- platform: modbus_controller
id: date_year
modbus_controller_id: powersupply
entity_category: diagnostic
register_type: holding
address: 48
value_type: U_WORD
- platform: modbus_controller
id: date_month
modbus_controller_id: powersupply
entity_category: diagnostic
register_type: holding
address: 49
value_type: U_WORD
- platform: modbus_controller
id: date_day
modbus_controller_id: powersupply
entity_category: diagnostic
register_type: holding
address: 50
value_type: U_WORD
- platform: modbus_controller
id: date_hour
modbus_controller_id: powersupply
entity_category: diagnostic
register_type: holding
address: 51
value_type: U_WORD
- platform: modbus_controller
id: date_minute
modbus_controller_id: powersupply
entity_category: diagnostic
register_type: holding
address: 52
value_type: U_WORD
- platform: modbus_controller
id: date_second
modbus_controller_id: powersupply
entity_category: diagnostic
register_type: holding
address: 53
value_type: U_WORD
switch:
- platform: modbus_controller
modbus_controller_id: powersupply
name: "Output"
address: 18
register_type: holding
bitmask: 0x1
entity_category: config
button:
- platform: safe_mode
name: "Safe mode"