Deprecation warnings fixed for esphome 2025.11

esphome/atorch-ble-proxy.yaml

@@ -44,6 +44,7 @@ wifi:
   use_address: atorch-dc-load.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/badezimmer-luft.yaml

@@ -22,6 +22,7 @@ wifi:
   use_address: bathroom.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/epaperframe.yaml

@@ -29,6 +29,7 @@ wifi:
   use_address: epaperframe.home
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/geigercounter.yaml

@@ -22,6 +22,7 @@ wifi:
   use_address: ${name}.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/home-assistant-voice-09c0e7.yaml

@@ -14,6 +14,7 @@ wifi:
   #use_address: ${name}.home  
   #power_save_mode: high
   #fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/kamera-balkon.yaml

@@ -54,8 +54,12 @@ i2c:
     sda: GPIO26
     scl: GPIO27
 
+psram:
+  speed: 80MHz
+
 # Camera
 esp32_camera:
+  frame_buffer_location: PSRAM
   name: ${friendly_name}
   external_clock:
     pin: GPIO0

esphome/kamera-wohnzimmer.yaml

@@ -42,15 +42,24 @@ ota:
   platform: esphome
   password: !secret ota
 
+# Initialize I²C
+i2c:
+  - id: bus_c
+    sda: GPIO26
+    scl: GPIO27
+
+psram:
+  speed: 80MHz
+
 # Camera
 esp32_camera:
+  frame_buffer_location: PSRAM
   name: ${friendly_name}
   external_clock:
     pin: GPIO0
     frequency: 20MHz
-  i2c_pins:
+  i2c_id:
-    sda: GPIO26
+    bus_c
-    scl: GPIO27
   data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
   vsync_pin: GPIO25
   href_pin: GPIO23

esphome/livingroom.yaml

@@ -60,6 +60,7 @@ wifi:
   use_address: ${name}.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
@@ -236,7 +237,7 @@ sensor:
   - platform: adc
     pin: 34
     name: "Spannung Photodiode"
-    attenuation: 11db
+    attenuation: 12db
     update_interval: 1s
     internal: true
     on_value_range:

esphome/m5stack-atom-echo.yaml

@@ -34,6 +34,7 @@ wifi:
   use_address: ${name}.home
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: "Raspiaudio Fallback Hotspot"

esphome/raspiaudio-muse-luxe.yaml

@@ -31,6 +31,7 @@ wifi:
   use_address: ${name}.home
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: "Raspiaudio Fallback Hotspot"
@@ -46,7 +47,7 @@ esphome:
     board_build.arduino.memory_type: qio_opi
   project:
     name: raspiaudio.voice-assistant
-    version: "2025.2.6"
+    version: "2025.3.1"
   on_boot:
     priority: -100.0
     then:
@@ -67,6 +68,7 @@ esp32:
 micro_wake_word:
   id: mww
   models:
+    - model: okay_nabu
     - model: https://github.com/kahrendt/microWakeWord/releases/download/okay_nabu_20241226.3/okay_nabu.json
 #   - model: hey_jarvis
 #    - model: hey_mycroft
@@ -164,16 +166,20 @@ sensor:
     update_interval: 15s
     attenuation: auto
     filters:
-      - multiply: 2 # https://forum.raspiaudio.com/t/esp-muse-luxe-bluetooth-speaker/294/12
+      - multiply: 2
+      - calibrate_linear:
+          - 0.0 -> 0.0
+          # Map measured full charge to real value to compensate divider/ADC bias
+          - 4.58 -> 4.20
       - exponential_moving_average:
-          alpha: 0.2
+             alpha: 0.2
-          send_every: 2
+             send_every: 2
       - delta: 0.002
     on_value:
-      then:
+        then:
-        - sensor.template.publish:
+          - sensor.template.publish:
-            id: battery_percent
+              id: battery_percent
-            state: !lambda "return x;"
+              state: !lambda "return x ;"
 
   - platform: template
     name: Battery
@@ -185,32 +191,32 @@ sensor:
     entity_category: diagnostic
     update_interval: 15s
     filters:
-      - calibrate_polynomial:
+         - calibrate_polynomial:
-          degree: 3
+              degree: 3
-          datapoints:
+              datapoints:
-            - 4.58 -> 100.0
+                  - 4.20 -> 100.0
-            - 4.5 -> 97.1
+                  - 4.13 -> 97.1
-            - 4.47 -> 94.2
+                  - 4.10 -> 94.2
-            - 4.44 -> 88.4
+                  - 4.07 -> 88.4
-            - 4.42 -> 82.7
+                  - 4.05 -> 82.7
-            - 4.41 -> 76.9
+                  - 4.04 -> 76.9
-            - 4.41 -> 71.1
+                  - 4.04 -> 71.1
-            - 4.37 -> 65.3
+                  - 4.01 -> 65.3
-            - 4.35 -> 59.5
+                  - 3.99 -> 59.5
-            - 4.31 -> 53.8
+                  - 3.95 -> 53.8
-            - 4.28 -> 48.0
+                  - 3.93 -> 48.0
-            - 4.26 -> 42.2
+                  - 3.91 -> 42.2
-            - 4.23 -> 36.4
+                  - 3.88 -> 36.4
-            - 4.21 -> 30.6
+                  - 3.86 -> 30.6
-            - 4.19 -> 24.9
+                  - 3.84 -> 24.9
-            - 4.16 -> 19.1
+                  - 3.82 -> 19.1
-            - 4.1 -> 13.3
+                  - 3.76 -> 13.3
-            - 4.07 -> 10.4
+                  - 3.73 -> 10.4
-            - 4.03 -> 7.5
+                  - 3.70 -> 7.5
-            - 3.97 -> 4.6
+                  - 3.64 -> 4.6
-            - 3.82 -> 1.7
+                  - 3.50 -> 1.7
-            - 3.27 -> 0.0
+                  - 3.00 -> 0.0
-      - lambda: return clamp(x, 0.0f, 100.0f);
+         - lambda: return clamp(x, 0.0f, 100.0f);   
 
 binary_sensor:
   - platform: gpio

esphome/riden-labornetzteil-18a.yaml

@@ -56,6 +56,7 @@ wifi:
   use_address: riden-labornetzteil-18a.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/riden-labornetzteil-6a.yaml

@@ -56,6 +56,7 @@ wifi:
   use_address: riden-labornetzteil-6a.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/serverroom.yaml

@@ -22,6 +22,7 @@ wifi:
   use_address: serverroom.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

esphome/sleepingroom.yaml

@@ -59,6 +59,7 @@ wifi:
   use_address: ${name}.home  
   power_save_mode: high
   fast_connect: on
+  min_auth_mode: WPA2
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
@@ -235,7 +236,7 @@ sensor:
   - platform: adc
     pin: 32
     name: "Spannung Photodiode"
-    attenuation: 11db
+    attenuation: 12db
     update_interval: 1s
     internal: true
     on_value_range:
@@ -259,6 +260,7 @@ remote_receiver:
 
 # IR Transmitter
 remote_transmitter:
+  non_blocking: True
   pin: GPIO22
   # Infrared remotes use a 50% carrier signal
   carrier_duty_percent: 50%