Added Livinroom power sensors.

esphome/epaperframe.yaml

@@ -160,6 +160,14 @@ sensor:
     entity_id: sensor.serverraum_power
     id: power_serverroom
 
+  - platform: homeassistant
+    entity_id: sensor.schreibtisch_power
+    id: desk_livingroom
+
+  - platform: homeassistant
+    entity_id: sensor.wohnzimmer_heimkino_power
+    id: media_livingroom
+
 text_sensor:
   - platform: homeassistant
     name: "Sun Rising ESP"
@@ -217,7 +225,7 @@ time:
       - output.turn_on: power_key
       - delay: 0.5s
       - output.turn_off: power_key
-    # Every 5 minutes
+    # Every 10 minutes
     - seconds: 0
       minutes: /10
       then:
@@ -693,6 +701,8 @@ display:
 
           float total_power = id(power_total).state;
           float serverroom_power = id(power_serverroom).state;
+          float livingroom_desk = id(desk_livingroom).state;
+          float livingroom_media = id(media_livingroom).state;
           int offsetX = 0;
           int offsetY = 0;
 
@@ -711,46 +721,24 @@ display:
           offsetY = 127;
           it.print(10, 10 + offsetY, id(sensor_unit), "Wohnzimmer");
           it.filled_rectangle(136, 21 + offsetY, 247, 3);
-          /*
-          it.print(10, 114 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
-          it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
-          it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
-          it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
           
+          it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
+          it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
 
-          if(livingroom_temp > -100 && livingroom_temp < 100) {
+          if(livingroom_desk >= 0) {
-            it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", livingroom_temp);
+            it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fW", livingroom_desk);
           }
           else {
-            it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
+            it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  W");
           }
 
-          if(livingroom_humid >=0 && livingroom_humid <= 100) {
+          if(livingroom_media >= 0) {
-            it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", livingroom_humid);
+            it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fW", livingroom_media);
           }
           else {
-            it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
+            it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  W");
           }
 
-          if(livingroom_co2 >=380 && livingroom_co2 <= 20000) {
-            it.printf(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", livingroom_co2);
-            it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
-          }
-          else {
-            it.print(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
-            it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
-          }
-
-          if(livingroom_pm25 < 255 && livingroom_pm25 >=0) {
-            it.printf(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", livingroom_pm25);
-            it.print(205, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
-          }
-          else {
-            it.print(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
-            it.print(205, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
-          }
-          */
-
           /* Sleepingroom */
           offsetY = 247;
           it.print(10, 10 + offsetY, id(sensor_unit), "Schlafzimmer");
@@ -803,7 +791,7 @@ display:
 
           it.print(227 + offsetX, 20 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰴾"); // transmission-tower
 
-          if(total_power > 0 && total_power < 19999) {
+          if(total_power >= 0) {
             it.printf(207 + offsetX, 20 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "W");
             it.printf(170 + offsetX, 20 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", total_power);
           }
@@ -820,7 +808,7 @@ display:
 
           it.print(227 + offsetX, 110 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
 
-          if(serverroom_power > 0 && serverroom_power < 999) {
+          if(serverroom_power >= 0) {
             it.printf(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "W");
             it.printf(170 + offsetX, 110 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", serverroom_power);
           }