Replace IR raw codes with vendor aware codes.

Add PM1006 particulate matter sensor.

esphome/sleepingroom.yaml

@@ -58,6 +58,11 @@ output:
     pin: GPIO18
     id: led_green
 
+# Initialize UART for Vindriktning sensor
+uart:
+  rx_pin: GPIO14
+  baud_rate: 9600
+
 # Create text sensor to represent CO2 LED warn state (somewhat redundant)
 text_sensor:
   - platform: template
@@ -149,39 +154,38 @@ sensor:
       name: "Schlafzimmer Luftdruck"
     address: 0x76
     update_interval: 60s
+# Vindriktning particulate matter sensor
+  - platform: pm1006
+    pm_2_5:
+      name: "Feinstaub PM 2.5µm"
 
+# IR Receiver, dumps all received values into serial
 remote_receiver:
   pin: 
     number: 23
-    inverted: true
+    inverted: True
   dump: all
 
+# IR Transmitter
 remote_transmitter:
   pin: GPIO22
   # Infrared remotes use a 50% carrier signal
   carrier_duty_percent: 50%
 
+# Temporary test switches
 switch:
   - platform: template
     name: Yamaha Power Button
     turn_on_action:
-      - remote_transmitter.transmit_raw:
-          carrier_frequency: 38kHz
-          # Yamaha power button
-          code: [ 9922, -3533, 2643, -699, 1542, -700, 1543, -699, 1540, -702,
-                  1540, -702, 1540, -703, 2660, -703, 8266, -703, 2657, -707,
-                  2655, -708, 2654, -710, 3773, -712, 2651, -712, 2651, -713,
-                  2650, -717, 11, -2, 1510, -733, 1507, -5652, 9905, -1301,
-                  1510 ]
+      - remote_transmitter.transmit_nec:
+          address: 0x7E81
+          command: 0x54AB
   - platform: template
     name: Samsung Power Button
     turn_on_action:
-      - remote_transmitter.transmit_raw:
-          carrier_frequency: 38kHz
-          # Samsung power button
-          code: [ 5430, -3513, 1515, -724, 1519, -723, 1519, -723, 7157, -723, 
-                  1519, -722, 1518, -724, 8284, -724, 8284, -724, 2645, -724,
-                  1519, -723, 1517, -725, 1517, -725, 1518, -724, 1517, -725 ]
+      - remote_transmitter.transmit_samsung:
+          data: 0xE0E040BF
+          nbits: 32
 #script:
 #  - id: startup_animation
 #    then: