Added Sleepingroom power sensor(s).

esphome/epaperframe.yaml

@@ -168,6 +168,14 @@ sensor:
     entity_id: sensor.wohnzimmer_heimkino_power
     id: media_livingroom
 
+  - platform: homeassistant
+    entity_id: sensor.schlafzimmer_bett_power
+    id: bedlight_sleepingroom
+    
+  - platform: homeassistant
+    entity_id: sensor.schlafzimmer_heimkino_power
+    id: media_sleepingroom
+
 text_sensor:
   - platform: homeassistant
     name: "Sun Rising ESP"
@@ -643,10 +651,6 @@ display:
             it.print(80 + offsetX, 200, id(big_sensor_font), TextAlign::BASELINE_LEFT, "Lüften!");
           }
 
-          /* ESP_LOGI("Sunrise: %s, Sunset: %s",
-                  id(sun_rising).state.c_str(), id(sun_setting).state.c_str());
-          */
-
           it.print(10 + offsetX, 250, id(mdi_small), TextAlign::BASELINE_LEFT, "󰖜"); // sun-up
           it.printf(50 + offsetX, 250, id(sensor_unit), TextAlign::BASELINE_LEFT, "%s", id(sun_rising).state.c_str());
           it.print(135 + offsetX, 250, id(mdi_small), TextAlign::BASELINE_LEFT, "󰖛"); // sun-down
@@ -703,6 +707,7 @@ display:
           float serverroom_power = id(power_serverroom).state;
           float livingroom_desk = id(desk_livingroom).state;
           float livingroom_media = id(media_livingroom).state;
+          float sleepingroom = id(media_sleepingroom).state + id(bedlight_sleepingroom).state;
           int offsetX = 0;
           int offsetY = 0;
 
@@ -725,6 +730,7 @@ display:
           it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
           it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
 
+          it.print(20, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT, "Schreibtisch");
           if(livingroom_desk >= 0) {
             it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f W", livingroom_desk);
           }
@@ -732,6 +738,7 @@ display:
             it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  W");
           }
 
+          it.print(20, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT, "Heimkino");
           if(livingroom_media >= 0) {
             it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f W", livingroom_media);
           }
@@ -743,46 +750,17 @@ display:
           offsetY = 247;
           it.print(10, 10 + offsetY, id(sensor_unit), "Schlafzimmer");
           it.filled_rectangle(144, 21 + offsetY, 239, 3);
-          /*
-          it.print(10, 114 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
-          it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
-          it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
-          it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
 
+          it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
 
-          if(sleepingroom_temp > -100 && sleepingroom_temp < 100) {
+          // it.print(20, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT, "Heimkino");
-            it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", sleepingroom_temp);
+          if(sleepingroom >= 0) {
+            it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f W", sleepingroom);
           }
           else {
-            it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
+            it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  W");
           }
 
-          if(sleepingroom_humid >=0 && sleepingroom_humid <= 100) {
-            it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", sleepingroom_humid);
-          }
-          else {
-            it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
-          }
-
-          if(sleepingroom_co2 >=380 && sleepingroom_co2 <= 20000) {
-            it.printf(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", sleepingroom_co2);
-            it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
-          }
-          else {
-            it.print(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
-            it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
-          }
-
-          if(sleepingroom_pm25 < 255 && sleepingroom_pm25 >=0) {
-            it.printf(220, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", sleepingroom_pm25);
-            it.print(225, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
-          }
-          else {
-            it.print(220, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
-            it.print(225, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
-          }
-          */
-
           /* LINEPOWER */
           offsetX = 390;
           offsetY = 65;