Made esphome devices 2026.07.xx compatible

esphome/riden-labornetzteil-18a.yaml

@@ -1,3 +1,5 @@
+# Source: https://github.com/wildekek/rdtech-esphome
+
 substitutions:
   name: "riden-labornetzteil-18a"
   friendly_name: "Riden Labornetzteil 18A"
@@ -16,6 +18,8 @@ substitutions:
   RD6006_current_maximum: "6"
   RD6006_current_accuracy: "3"
   RD6006_current_multiplier: "0.001"
+  RD6006_power_accuracy: "2"
+  RD6006_power_multiplier: "0.01"
   
   RD6006P_voltage_maximum: "60"
   RD6006P_voltage_accuracy: "3"
@@ -23,6 +27,8 @@ substitutions:
   RD6006P_current_maximum: "6"
   RD6006P_current_accuracy: "4"
   RD6006P_current_multiplier: "0.0001"
+  RD6006P_power_accuracy: "3"
+  RD6006P_power_multiplier: "0.001"
 
   RD6012_voltage_maximum: "60"
   RD6012_voltage_accuracy: "2"
@@ -30,6 +36,8 @@ substitutions:
   RD6012_current_maximum: "12"
   RD6012_current_accuracy: "2"
   RD6012_current_multiplier: "0.01"
+  RD6012_power_accuracy: "2"
+  RD6012_power_multiplier: "0.01"
 
   RD6018_voltage_maximum: "60"
   RD6018_voltage_accuracy: "2"
@@ -37,6 +45,8 @@ substitutions:
   RD6018_current_maximum: "18"
   RD6018_current_accuracy: "2"
   RD6018_current_multiplier: "0.01"
+  RD6018_power_accuracy: "2"
+  RD6018_power_multiplier: "0.01"
 
 esphome:
   name: $device_name
@@ -45,7 +55,7 @@ esphome:
   name_add_mac_suffix: false
   project:
     name: "wildekek.rd6006-controller"
-    version: "1.4.1"
+    version: "1.5"
 
 esp8266:
   board: esp12e
@@ -56,7 +66,7 @@ network:
 wifi:
   ssid: "Voltage-legacy"
   password: !secret voltage_legacy_psk
-  #use_address: riden-labornetzteil-18a.home  
+  use_address: riden-labornetzteil-18a.home  
   power_save_mode: high
   fast_connect: on
   min_auth_mode: WPA2
@@ -149,10 +159,10 @@ sensor:
     register_type: holding
     value_type: U_WORD
     accuracy_decimals: 0
-    on_value:
-      then:
-        - lambda: |-
-            id(model_name).publish_state(value_accuracy_to_string(x, 0));
+#    on_value:
+#      then:
+#        - lambda: |-
+#            id(model_name).publish_state(value_accuracy_to_string(x, 0));
 
   - platform: modbus_controller
     name: "Serial Number"
@@ -213,9 +223,9 @@ sensor:
     unit_of_measurement: "W"
     register_type: holding
     value_type: U_DWORD
-    accuracy_decimals: 2
+    accuracy_decimals: ${${model}_power_accuracy}
     filters:
-      - multiply: 0.01
+      - multiply: ${${model}_power_multiplier}
 
   - platform: modbus_controller
     modbus_controller_id: powersupply
@@ -226,9 +236,9 @@ sensor:
     unit_of_measurement: "V"
     register_type: holding
     value_type: U_WORD
-    accuracy_decimals: ${${model}_voltage_accuracy}
+    accuracy_decimals: 2
     filters:
-      - multiply: ${${model}_voltage_multiplier}
+      - multiply: 0.01
 
   - platform: modbus_controller
     modbus_controller_id: powersupply
@@ -266,9 +276,9 @@ sensor:
     unit_of_measurement: "V"
     register_type: holding
     value_type: U_WORD
-    accuracy_decimals: ${${model}_voltage_accuracy}
+    accuracy_decimals: 2
     filters:
-      - multiply: ${${model}_voltage_multiplier}
+      - multiply: 0.01
   
   - platform: modbus_controller
     name: "Temperature"