Removed DHT22, replaced airpressure with value from HA. Remade serverroom representation.

esphome/epaperframe.yaml

@@ -11,7 +11,7 @@ esphome:
 wifi:
   ssid: "Voltage-legacy"
   password: !secret voltage_legacy_psk
-  use_address: epaperframe.home  
+  use_address: epaperframe.home
   power_save_mode: high
   fast_connect: on
 
@@ -28,7 +28,7 @@ logger:
 # Enable Home Assistant API
 api:
   password: !secret api
-#  encryption: 
+#  encryption:
 #    key: !secret apikey
 
 ota:
@@ -68,31 +68,21 @@ binary_sensor:
 
 # DHT22 sensor
 sensor:
-  - platform: dht
-    model: dht22
-    pin: 22
-    temperature:
-      name: "Temperatur"
-      id: temp_serverroom
-    humidity:
-      name: "Luftfeuchtigkeit"
-      id: humid_serverroom
-    update_interval: 60s
 
   # WiFi signal strength
   - platform: wifi_signal
     name: "WiFi Signalstärke"
     id: wifisignal
     update_interval: 60s
-    
+
   - platform: homeassistant
-    entity_id: sensor.wohnzimmer_feinstaub_pm_2_5um 
+    entity_id: sensor.wohnzimmer_feinstaub_pm_2_5um
     id: pm25_livingroom
 
   - platform: homeassistant
     entity_id: sensor.wohnzimmer_temperatur
     id: temp_livingroom
-  
+
   - platform: homeassistant
     entity_id: sensor.wohnzimmer_luftfeuchtigkeit
     id: humid_livingroom
@@ -102,13 +92,13 @@ sensor:
     id: co2_livingroom
 
   - platform: homeassistant
-    entity_id: sensor.feinstaub_pm_2_5um 
+    entity_id: sensor.feinstaub_pm_2_5um
     id: pm25_sleepingroom
 
   - platform: homeassistant
     entity_id: sensor.schlafzimmer_temperatur
     id: temp_sleepingroom
-  
+
   - platform: homeassistant
     entity_id: sensor.schlafzimmer_luftfeuchtigkeit
     id: humid_sleepingroom
@@ -116,19 +106,23 @@ sensor:
   - platform: homeassistant
     entity_id: sensor.schlafzimmer_co2
     id: co2_sleepingroom
-  
+
   - platform: homeassistant
     entity_id: sensor.temperatur_aussen
     id: temp_outdoor
-  
+
   - platform: homeassistant
     entity_id: sensor.luftfeuchtigkeit_aussen
     id: humid_outdoor
-  
+
   - platform: homeassistant
-    entity_id: sensor.schlafzimmer_luftdruck
+    entity_id: sensor.luftdruck
     id: airpressure
 
+  - platform: homeassistant
+    entity_id: sensor.serveraum_temperatur
+    id: temp_serverroom
+
 text_sensor:
   - platform: homeassistant
     entity_id: sun.sun
@@ -206,7 +200,7 @@ font:
        'T', 'U', 'V', 'W', 'X', 'Y', 'Z', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
        'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
        'u', 'v', 'w', 'x', 'y', 'z', 'å', 'ä', 'ö', '/', 'º', 'µ', '³', 'ß']
-       
+
   - file: 'fonts/Roboto-Medium.ttf'
     id: sub_sensor_font
     size: 30
@@ -217,11 +211,11 @@ font:
        'T', 'U', 'V', 'W', 'X', 'Y', 'Z', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
        'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
        'u', 'v', 'w', 'x', 'y', 'z', 'å', 'ä', 'ö', '/', 'º', 'µ', '³', 'ß']
-  
+
   - file: 'fonts/Roboto-Bold.ttf'
     id: big_sensor_font
     size: 50
-  
+
   - file: 'fonts/materialdesignicons-webfont.ttf'
     id:  mdi_small
     size: 31
@@ -306,9 +300,9 @@ display:
     pages:
       - id: environment
         lambda: |-
-        
+
           int pm25_danger_thres = 40;
-        
+
           float outdoor_temp = id(temp_outdoor).state;
           int outdoor_humid = int(id(humid_outdoor).state);
           float air_pressure = id(airpressure).state;
@@ -321,7 +315,6 @@ display:
           int sleepingroom_pm25 = int(id(pm25_sleepingroom).state);
           float sleepingroom_co2 = id(co2_sleepingroom).state;
           float serverroom_temp = id(temp_serverroom).state;
-          int serverroom_humid = id(humid_serverroom).state;
           char sunrise[5] = "";
           char sunset[5] = "";
           int offsetX = 0;
@@ -382,7 +375,7 @@ display:
           else {
             it.print(220, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
             it.print(225, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "hPa");
-          } 
+          }
 
 
           /* Livingroom */
@@ -393,7 +386,7 @@ display:
           it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
           it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
           it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
-          
+
 
           if(livingroom_temp > -100 && livingroom_temp < 100) {
             it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", livingroom_temp);
@@ -439,7 +432,7 @@ display:
           it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
           it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
           it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
-          
+
 
           if(sleepingroom_temp > -100 && sleepingroom_temp < 100) {
             it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", sleepingroom_temp);
@@ -474,7 +467,7 @@ display:
           else {
             it.print(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
             it.print(205, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
-          } 
+          }
 
           /* Weather */
           offsetX = 390;
@@ -610,27 +603,21 @@ display:
           it.print(10 + offsetX, 10 + offsetY, id(sensor_unit), "Serverraum");
           it.filled_rectangle(125 + offsetX, 21 + offsetY, 110, 3);
 
-          it.print(227 + offsetX, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
+          /* it.print(227 + offsetX, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
-          it.print(227+ offsetX, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
+          * it.print(227+ offsetX, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent */
+          it.print(227 + offsetX, 110 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
 
           if(serverroom_temp > -100 && serverroom_temp < 100) {
-            it.printf(207 + offsetX, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", serverroom_temp);
+            it.printf(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "ºC");
+            it.printf(170 + offsetX, 110 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", serverroom_temp);
           }
           else {
-            it.print(207 + offsetX, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
+            it.print(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
           }
 
-          if(serverroom_humid >=0 && serverroom_humid <= 100) {
-            it.printf(207 + offsetX, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", serverroom_humid);
-          }
-          else {
-            it.print(207 + offsetX, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
-          }
-
-
           /* FOOTER */
           it.strftime(614, 380, id(footer_font), TextAlign::BASELINE_RIGHT , "Aktualisiert um %d.%m.%Y %H:%M", id(homeassistant_time).now());
-          
+
           /* WiFi Signal Strenght */
           if(id(wifisignal).has_state()) {
             int x = 630;