Added power dashboard based on environment template. Added total and serverroom meter.

esphome/epaperframe.yaml

@@ -6,6 +6,7 @@ esphome:
     priority: -10
     then:
       - delay: 10s
+      - display.page.show: power # temporary for power page dev
       - component.update: epaper
 
 wifi:
@@ -28,8 +29,8 @@ logger:
 # Enable Home Assistant API
 api:
   password: !secret api
-#  encryption:
+  encryption:
-#    key: !secret apikey
+    key: !secret apikey
 
 ota:
   password: !secret ota
@@ -118,6 +119,14 @@ sensor:
   - platform: homeassistant
     entity_id: sensor.serveraum_temperatur
     id: temp_serverroom
+
+  - platform: homeassistant
+    entity_id: sensor.line_power_total
+    id: power_total
+
+  - platform: homeassistant
+    entity_id: sensor.serverraum_power
+    id: power_serverroom
     
 text_sensor:
   - platform: homeassistant
@@ -234,7 +243,9 @@ font:
       '󰊚', # mdi-gauge (air pressure)
       '󰖙', # mdi-weather-sunny
       '󰖛', # mdi-weather-sunset-down
-      '󰖜' # mdi-weather-sunset-up
+      '󰖜', # mdi-weather-sunset-up
+      '󱐋', # mdi-lightning-bolt
+      '󰴾' # mdi-transmission-tower
       ]
 
   - file: 'fonts/materialdesignicons-webfont.ttf'
@@ -327,8 +338,8 @@ display:
           /* OUTSIDE */
           it.print(10, 10, id(sensor_unit), "Umwelt");
           /*
-          Draw the outline of a rectangle with the top left at [78,21],
+          Draw the outline of a rectangle with the top left at [86,21],
-          a width of 305 and a height of 3
+          a width of 297 and a height of 3
           */
           it.filled_rectangle(86, 21, 297, 3);
 
@@ -628,7 +639,170 @@ display:
                 ESP_LOGI("WiFi", "Unlikely");
             }
           }
-      - id: logo
+      - id: power
         lambda: |-
 
-          it.image(1, 48, id(c1024_logo));
+          float total_power = id(power_total).state;
+          float serverroom_power = id(power_serverroom).state;
+          int offsetX = 0;
+          int offsetY = 0;
+
+          /* BASEMENT */
+          it.print(10, 10, id(sensor_unit), "Keller");
+          /*
+          Draw the outline of a rectangle with the top left at [86,21],
+          a width of 297 and a height of 3
+          */
+          it.filled_rectangle(76, 21, 317, 3);
+
+          /* C1024 logo */
+          it.image(10 , 37, id(c1024_logo));
+
+          /* Livingroom */
+          offsetY = 127;
+          it.print(10, 10 + offsetY, id(sensor_unit), "Wohnzimmer");
+          it.filled_rectangle(136, 21 + offsetY, 247, 3);
+          /*
+          it.print(10, 114 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
+          it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
+          it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
+          it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
+
+
+          if(livingroom_temp > -100 && livingroom_temp < 100) {
+            it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", livingroom_temp);
+          }
+          else {
+            it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
+          }
+
+          if(livingroom_humid >=0 && livingroom_humid <= 100) {
+            it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", livingroom_humid);
+          }
+          else {
+            it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
+          }
+
+          if(livingroom_co2 >=380 && livingroom_co2 <= 20000) {
+            it.printf(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", livingroom_co2);
+            it.print(150, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
+          }
+          else {
+            it.print(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+            it.print(150, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
+          }
+
+          if(livingroom_pm25 < 255 && livingroom_pm25 >=0) {
+            it.printf(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", livingroom_pm25);
+            it.print(205, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
+          }
+          else {
+            it.print(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+            it.print(205, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
+          }
+          */
+
+          /* Sleepingroom */
+          offsetY = 247;
+          it.print(10, 10 + offsetY, id(sensor_unit), "Schlafzimmer");
+          it.filled_rectangle(144, 21 + offsetY, 239, 3);
+          /*
+          it.print(10, 114 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
+          it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
+          it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
+          it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
+
+
+          if(sleepingroom_temp > -100 && sleepingroom_temp < 100) {
+            it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", sleepingroom_temp);
+          }
+          else {
+            it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
+          }
+
+          if(sleepingroom_humid >=0 && sleepingroom_humid <= 100) {
+            it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", sleepingroom_humid);
+          }
+          else {
+            it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
+          }
+
+          if(sleepingroom_co2 >=380 && sleepingroom_co2 <= 20000) {
+            it.printf(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", sleepingroom_co2);
+            it.print(150, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
+          }
+          else {
+            it.print(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+            it.print(150, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
+          }
+
+          if(sleepingroom_pm25 < 255 && sleepingroom_pm25 >=0) {
+            it.printf(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", sleepingroom_pm25);
+            it.print(205, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
+          }
+          else {
+            it.print(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+            it.print(205, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
+          }
+          */
+
+          /* LINEPOWER */
+          offsetX = 390;
+          offsetY = 65;
+          it.print(10 + offsetX, 10, id(sensor_unit), "Gesamt");
+          it.filled_rectangle(90 + offsetX, 21, 155, 3);
+
+          it.print(227 + offsetX, 20 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰴾"); // transmission-tower
+
+          if(total_power > 0 && total_power < 19999) {
+            it.printf(207 + offsetX, 20 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "W");
+            it.printf(170 + offsetX, 20 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", total_power);
+          }
+          else {
+            it.print(207 + offsetX, 20 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - W");
+          }
+
+          /* Serverroom */
+          offsetY = 247;
+          it.print(10 + offsetX, 10 + offsetY, id(sensor_unit), "Serverraum");
+          it.filled_rectangle(125 + offsetX, 21 + offsetY, 110, 3);
+
+          it.print(227 + offsetX, 110 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󱐋"); // lightning-bolt
+
+          if(serverroom_power > 0 && serverroom_power < 999) {
+            it.printf(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "W");
+            it.printf(170 + offsetX, 110 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", serverroom_power);
+          }
+          else {
+            it.print(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - W");
+          }
+
+          /* FOOTER */
+          it.strftime(614, 380, id(footer_font), TextAlign::BASELINE_RIGHT , "Aktualisiert um %d.%m.%Y %H:%M", id(homeassistant_time).now());
+
+          /* WiFi Signal Strenght */
+          if(id(wifisignal).has_state()) {
+            int x = 630;
+            int y = 384;
+            if (id(wifisignal).state >= -50) {
+                //Excellent
+                it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤨");
+                ESP_LOGI("WiFi", "Excellent");
+            } else if (id(wifisignal).state  >= -60) {
+                //Good
+                it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤥");
+                ESP_LOGI("WiFi", "Good");
+            } else if (id(wifisignal).state  >= -75) {
+                //Fair
+                it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤢");
+                ESP_LOGI("WiFi", "Fair");
+            } else if (id(wifisignal).state  >= -100) {
+                //Weak
+                it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤟");
+                ESP_LOGI("WiFi", "Weak");
+            } else {
+                //Unlikely working signal
+                it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤫");
+                ESP_LOGI("WiFi", "Unlikely");
+            }
+          }