.HA_VERSION

@@ -1 +1 @@
-2024.1.4
+2024.1.3

.gitignore

@@ -11,4 +11,4 @@ media/
 home-assistant.log*
 .storage/
 zigbee.db*
-*__pycache__*
+

automations.yaml

@@ -427,6 +427,10 @@
       - 32d15eec63fe68d5770813d47da53657
       - 53a27edf581fcf40f3bc8b253b1ee369
     data: {}
+  - type: turn_on
+    device_id: c4ead7f6227e2ee4c43c4b0df829cd84
+    entity_id: 7f7284b11f2bf50ae2f0ebeeb35411c0
+    domain: switch
   mode: single
 - id: '1648485179021'
   alias: Schalte den Fernseher mit WoL ein

esphome/epaperframe.yaml

@@ -158,11 +158,11 @@ sensor:
     id: humid_outdoor
 
   - platform: homeassistant
-    entity_id: sensor.serverroom_luftdruck
+    entity_id: sensor.luftdruck
     id: airpressure
 
   - platform: homeassistant
-    entity_id: sensor.serverroom_serveraum_temperatur
+    entity_id: sensor.serveraum_temperatur
     id: temp_serverroom
 
   - platform: homeassistant
@@ -437,7 +437,7 @@ display:
           it.print(375, 130, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent icon
           it.print(95, 80,  id(mdi_small), TextAlign::BASELINE_LEFT, "󰐼"); // radioactive icon
 
-          if(outdoor_radiation >= 0) {
+          if(outdoor_radiation > 0 && outdoor_radiation < 100) {
             it.printf(200, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.2f", outdoor_radiation);
             it.print(205, 80, id(sensor_unit), TextAlign::BASELINE_LEFT, "µS/h");
           }

esphome/kamera-wohnzimmer.yaml

@@ -1,77 +0,0 @@
-substitutions:
-  name: kamera-wohnzimmer
-  friendly_name: Kamera Wohnzimmer
-
-esphome:
-  name: ${name}
-  friendly_name: ${friendly_name}
-  name_add_mac_suffix: false
-  project:
-    name: sensor.camera
-    version: "1.0"
-  min_version: 2022.1.0
-
-esp32:
-  board: esp32dev
-  framework:
-    type: arduino
-
-wifi:
-  ssid: "Voltage-legacy"
-  password: !secret voltage_legacy_psk
-  use_address: ${name}.home  
-  power_save_mode: high
-  fast_connect: on
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Cam Wohnzimmer Fallback Hotspot"
-    password: !secret fallback_psk
-
-captive_portal:
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-  encryption: 
-    key: !secret apikey
-
-ota:
-  password: !secret ota
-
-# Camera
-esp32_camera:
-  name: ${friendly_name}
-  external_clock:
-    pin: GPIO0
-    frequency: 20MHz
-  i2c_pins:
-    sda: GPIO26
-    scl: GPIO27
-  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
-  vsync_pin: GPIO25
-  href_pin: GPIO23
-  pixel_clock_pin: GPIO22
-  power_down_pin: GPIO32
-  resolution: SVGA
-  max_framerate: 24 fps
-  idle_framerate: 0.2 fps
-  jpeg_quality: 30
-  vertical_flip: true
-  horizontal_mirror: true
-
-# Flash LED
-output:
-- platform: ledc
-  pin: GPIO4
-  id: flash
-  channel: 2
-
-# Define RGB mode for LED
-light:
-  - platform: monochromatic
-    id: flashlight
-    name: "Blitzlicht"
-    output: flash

esphome/serverroom.yaml

@@ -1,20 +1,8 @@
-substitutions:
-  name: "serverroom"
-  friendly_name: "Serverraum Luft"
-
 esphome:
-  name: ${name}
-  friendly_name: ${friendly_name}
-  name_add_mac_suffix: false
-  project:
-    name: sensor.outdoor
-    version: "0.8"
-  min_version: 2022.1.0
-
-esp32:
-  board: esp32-c3-devkitm-1
-  framework:
-    type: arduino
+  name: serverroom
+  friendly_name: "Serverraum Luft"
+  platform: ESP32
+  board: nodemcu-32s
 
 wifi:
   ssid: "Voltage-legacy"
@@ -35,6 +23,7 @@ logger:
 
 # Enable Home Assistant API
 api:
+  password: !secret api
   encryption: 
     key: !secret apikey
 
@@ -44,11 +33,11 @@ ota:
 # Initialize I²C
 i2c:
  - id: bus_a
-   sda: 4
-   scl: 3
+   sda: 32
+   scl: 25
    scan: true
 
-# BMP280 sensor
+# DHT22 sensor
 sensor:
   - platform: bmp280
     i2c_id: bus_a