.HA_VERSION

@@ -1 +1 @@
-2023.2.0
+2022.12.6

esphome/aussensensor.yaml

@@ -22,6 +22,7 @@ logger:
 
 # Enable Home Assistant API
 api:
+  password: !secret api
   encryption: 
     key: !secret apikey
 

esphome/epaperframe.yaml

@@ -28,6 +28,7 @@ logger:
 
 # Enable Home Assistant API
 api:
+  password: !secret api
   encryption:
     key: !secret apikey
 

esphome/geigercounter.yaml

@@ -22,6 +22,7 @@ logger:
 
 # Enable Home Assistant API
 api:
+  password: !secret api
   encryption: 
     key: !secret apikey
 
@@ -58,10 +59,6 @@ sensor:
     count_mode:
       rising_edge: DISABLE
       falling_edge: INCREMENT
-    # Hardware counter alows only 13us debounce, so we set it OFF:
-    use_pcnt: False
-    # When hw counter is OFF then we may set our filter time to SBM20 190 us Deadtime value or any other (also in microseconds):
-    internal_filter: 190us
     update_interval: 60s
     accuracy_decimals: 3
     id: dose_meter
@@ -69,7 +66,7 @@ sensor:
       - sliding_window_moving_average: # 5-minutes moving average (MA5) here
           window_size: 5
           send_every: 1
-      - multiply: 0.0057 # SBM20 tube conversion factor of pulses into µSv/Hour
+      - multiply: 0.0054 # SBM20 tube conversion factor of pulses into µSv/Hour
   - platform: integration
     name: "Gesamte Strahlungsdosis"
     unit_of_measurement: "µSv"
@@ -78,9 +75,7 @@ sensor:
     accuracy_decimals: 5
     time_unit: min # integrate values every next minute
     filters:
-      # obtained dose. Converting from mkSv/hour into mkSv/minute: [mkSv/h / 60] OR [mkSv/h * 0.0166666667]. 
-      # if my_dose_meter in CPM, then [0.0054 / 60 minutes] = 0.00009; so CPM * 0.00009 = dose every next minute, mkSv.
-      - multiply: 0.0166666667
+      - multiply: 0.00009 # obtained doze (from mkSv/hour into mkSv/minute) conversion factor: 0.0054 / 60 minutes = 0.00009; so pulses * 0.00009 = doze every next minute, µSv.
 text_sensor:
   - platform: homeassistant
     entity_id: sun.sun

esphome/livingroom.yaml

@@ -61,6 +61,7 @@ logger:
 
 # Enable Home Assistant API
 api:
+  password: !secret api
   encryption: 
     key: !secret apikey
 

esphome/raspiaudio-muse-luxe.yaml

@@ -19,6 +19,7 @@ wifi:
 
 # Enable Home Assistant API
 api:
+  password: !secret api
   encryption: 
     key: !secret apikey
 

esphome/serverroom.yaml

@@ -38,6 +38,14 @@ i2c:
 
 # DHT22 sensor
 sensor:
+#  - platform: dht
+#    model: dht22
+#    pin: 22
+#    temperature:
+#      name: "Temperatur Serverraum"
+#    humidity:
+#      name: "Luftfeuchtigkeit Serverraum"
+#    update_interval: 60s
   - platform: bmp280
     i2c_id: bus_a
     temperature:

esphome/sleepingroom.yaml

@@ -61,6 +61,7 @@ logger:
 
 # Enable Home Assistant API
 api:
+  password: !secret api
   encryption: 
     key: !secret apikey
 

utility_meters.yaml

@@ -1,24 +0,0 @@
-  internet_usage_in_monthly:
-    source: sensor.snmp_wan_in
-    name: Monthly internet traffic in
-    cycle: monthly
-  internet_usage_out_monthly:
-    source: sensor.snmp_wan_out
-    name: Monthly internet traffic out
-    cycle: monthly
-  internet_usage_in_daily:
-    source: sensor.snmp_wan_in
-    name: Daily internet traffic in
-    cycle: daily
-  internet_usage_out_daily:
-    source: sensor.snmp_wan_out
-    name: Daily internet traffic out
-    cycle: daily
-  internet_usage_in_hourly:
-    source: sensor.snmp_wan_in
-    name: Hourly internet traffic in
-    cycle: hourly
-  internet_usage_out_hourly:
-    source: sensor.snmp_wan_out
-    name: Hourly internet traffic out
-    cycle: hourly