Made esphome devices 2026.07.xx compatible

esphome/epaperframe.yaml

@@ -251,6 +251,14 @@ time:
               level: INFO
               format: "Timer based screen refresh"
           - component.update: epaper
+      - seconds: 10
+        minutes: 0
+        hours: 0
+        then:
+          - logger.log:
+              level: INFO
+              format: "Update screen on new day"
+          - component.update: epaper
 
 # Font definitions
 font:

esphome/m5stack-atom-echo.yaml

@@ -3,16 +3,16 @@
 substitutions:
   name: m5stack-atom-echo
   friendly_name: M5Stack Atom Echo
-  micro_wake_word_model: okay_nabu  # alexa, hey_jarvis, hey_mycroft are also supported
 
 esphome:
   name: ${name}
-  name_add_mac_suffix: False
+  name_add_mac_suffix: false
   friendly_name: ${friendly_name}
-  min_version: 2025.2.0
+  min_version: 2025.5.0
 
 esp32:
   board: m5stack-atom
+  cpu_frequency: 240MHz
   framework:
     type: esp-idf
 
@@ -63,14 +63,17 @@ microphone:
     i2s_din_pin: GPIO23
     adc_type: external
     pdm: true
+    sample_rate: 16000
+    correct_dc_offset: true
 
 speaker:
   - platform: i2s_audio
     id: echo_speaker
     i2s_dout_pin: GPIO22
     dac_type: external
-    bits_per_sample: 32bit
-    channel: right
+    bits_per_sample: 16bit
+    sample_rate: 16000
+    channel: stereo  # The Echo has poor playback audio quality when using mon audio
     buffer_duration: 60ms
 
 media_player:
@@ -80,7 +83,6 @@ media_player:
     announcement_pipeline:
       speaker: echo_speaker
       format: WAV
-    codec_support_enabled: false
     buffer_size: 6000
     volume_min: 0.4
     files:
@@ -91,14 +93,7 @@ media_player:
           condition:
             - microphone.is_capturing:
           then:
-            - if:
-                condition:
-                  lambda: return id(wake_word_engine_location).state == "On device";
-                then:
-                  - micro_wake_word.stop:
-                else:
-                  - voice_assistant.stop:
-            - script.execute: reset_led
+            - script.execute: stop_wake_word
       - light.turn_on:
           id: led
           blue: 100%
@@ -108,14 +103,18 @@ media_player:
           effect: none
     on_idle:
       - script.execute: start_wake_word
+      - script.execute: reset_led
 
 voice_assistant:
   id: va
+  micro_wake_word:
+  microphone:
     microphone: echo_microphone
+    channels: 0
+    gain_factor: 4
   media_player: echo_media_player
   noise_suppression_level: 2
   auto_gain: 31dBFS
-  volume_multiplier: 2.0
   on_listening:
     - light.turn_on:
         id: led
@@ -139,8 +138,26 @@ voice_assistant:
         brightness: 100%
         effect: none
   on_end:
-    - delay: 100ms
-    - script.execute: start_wake_word
+    # Handle the "nevermind" case where there is no announcement
+    - wait_until:
+        condition:
+          - media_player.is_announcing:
+        timeout: 0.5s
+    # Restart only mWW if enabled; streaming wake words automatically restart
+    - if:
+        condition:
+          - lambda: |-
+              return id(wake_word_engine_location).current_option() == "On device";
+        then:
+          - wait_until:
+              - and:
+                  - not:
+                      voice_assistant.is_running:
+                  - not:
+                      speaker.is_playing:
+          - lambda: id(va).set_use_wake_word(false);
+          - micro_wake_word.start:
+    - script.execute: reset_led
   on_error:
     - light.turn_on:
         id: led
@@ -155,11 +172,9 @@ voice_assistant:
     - delay: 2s  # Give the api server time to settle
     - script.execute: start_wake_word
   on_client_disconnected:
-    - voice_assistant.stop:
-    - micro_wake_word.stop:
+    - script.execute: stop_wake_word
   on_timer_finished:
-    - voice_assistant.stop:
-    - micro_wake_word.stop:
+    - script.execute: stop_wake_word
     - wait_until:
         not:
           microphone.is_capturing:
@@ -235,7 +250,8 @@ script:
     then:
       - if:
           condition:
-            - lambda: return id(wake_word_engine_location).state == "On device";
+            - lambda: |-
+                return id(wake_word_engine_location).current_option() == "On device";
             - switch.is_on: use_listen_light
           then:
             - light.turn_on:
@@ -248,7 +264,8 @@ script:
           else:
             - if:
                 condition:
-                  - lambda: return id(wake_word_engine_location).state != "On device";
+                  - lambda: |-
+                      return id(wake_word_engine_location).current_option() == "On device";
                   - switch.is_on: use_listen_light
                 then:
                   - light.turn_on:
@@ -262,27 +279,41 @@ script:
                   - light.turn_off: led
   - id: start_wake_word
     then:
-      - wait_until:
-          and:
-            - media_player.is_idle:
-            - speaker.is_stopped:
       - if:
           condition:
-            lambda: return id(wake_word_engine_location).state == "On device";
+            and:
+              - not:
+                  - voice_assistant.is_running:
+              - lambda: |-
+                  return id(wake_word_engine_location).current_option() == "On device";
           then:
-            - voice_assistant.stop
-            - micro_wake_word.stop:
-            - delay: 1s
-            - script.execute: reset_led
-            - script.wait: reset_led
+            - lambda: id(va).set_use_wake_word(false);
             - micro_wake_word.start:
-          else:
       - if:
-                condition: voice_assistant.is_running
+          condition:
+            and:
+              - not:
+                  - voice_assistant.is_running:
+              - lambda: |-
+                  return id(wake_word_engine_location).current_option() == "In Home Assistant";
           then:
-                  - voice_assistant.stop:
-                  - script.execute: reset_led
+            - lambda: id(va).set_use_wake_word(true);
             - voice_assistant.start_continuous:
+  - id: stop_wake_word
+    then:
+      - if:
+          condition:
+            lambda: |-
+                  return id(wake_word_engine_location).current_option() == "In Home Assistant";
+          then:
+            - lambda: id(va).set_use_wake_word(false);
+            - voice_assistant.stop:
+      - if:
+          condition:
+            lambda: |-
+              return id(wake_word_engine_location).current_option() == "On device";
+          then:
+            - micro_wake_word.stop:
 
 switch:
   - platform: template
@@ -342,7 +373,7 @@ select:
           condition:
             lambda: return x == "In Home Assistant";
           then:
-            - micro_wake_word.stop
+            - micro_wake_word.stop:
             - delay: 500ms
             - lambda: id(va).set_use_wake_word(true);
             - voice_assistant.start_continuous:
@@ -351,9 +382,9 @@ select:
             lambda: return x == "On device";
           then:
             - lambda: id(va).set_use_wake_word(false);
-            - voice_assistant.stop
+            - voice_assistant.stop:
             - delay: 500ms
-            - micro_wake_word.start
+            - micro_wake_word.start:
 
 micro_wake_word:
   on_wake_word_detected:
@@ -361,4 +392,9 @@ micro_wake_word:
         wake_word: !lambda return wake_word;
   vad:
   models:
-    - model: ${micro_wake_word_model}
+    - model: okay_nabu
+      id: okay_nabu
+    - model: hey_mycroft
+      id: hey_mycroft
+    - model: hey_jarvis
+      id: hey_jarvis

esphome/riden-labornetzteil-18a.yaml

@@ -1,3 +1,5 @@
+# Source: https://github.com/wildekek/rdtech-esphome
+
 substitutions:
   name: "riden-labornetzteil-18a"
   friendly_name: "Riden Labornetzteil 18A"
@@ -16,6 +18,8 @@ substitutions:
   RD6006_current_maximum: "6"
   RD6006_current_accuracy: "3"
   RD6006_current_multiplier: "0.001"
+  RD6006_power_accuracy: "2"
+  RD6006_power_multiplier: "0.01"
   
   RD6006P_voltage_maximum: "60"
   RD6006P_voltage_accuracy: "3"
@@ -23,6 +27,8 @@ substitutions:
   RD6006P_current_maximum: "6"
   RD6006P_current_accuracy: "4"
   RD6006P_current_multiplier: "0.0001"
+  RD6006P_power_accuracy: "3"
+  RD6006P_power_multiplier: "0.001"
 
   RD6012_voltage_maximum: "60"
   RD6012_voltage_accuracy: "2"
@@ -30,6 +36,8 @@ substitutions:
   RD6012_current_maximum: "12"
   RD6012_current_accuracy: "2"
   RD6012_current_multiplier: "0.01"
+  RD6012_power_accuracy: "2"
+  RD6012_power_multiplier: "0.01"
 
   RD6018_voltage_maximum: "60"
   RD6018_voltage_accuracy: "2"
@@ -37,6 +45,8 @@ substitutions:
   RD6018_current_maximum: "18"
   RD6018_current_accuracy: "2"
   RD6018_current_multiplier: "0.01"
+  RD6018_power_accuracy: "2"
+  RD6018_power_multiplier: "0.01"
 
 esphome:
   name: $device_name
@@ -45,7 +55,7 @@ esphome:
   name_add_mac_suffix: false
   project:
     name: "wildekek.rd6006-controller"
-    version: "1.4.1"
+    version: "1.5"
 
 esp8266:
   board: esp12e
@@ -56,7 +66,7 @@ network:
 wifi:
   ssid: "Voltage-legacy"
   password: !secret voltage_legacy_psk
-  #use_address: riden-labornetzteil-18a.home  
+  use_address: riden-labornetzteil-18a.home  
   power_save_mode: high
   fast_connect: on
   min_auth_mode: WPA2
@@ -149,10 +159,10 @@ sensor:
     register_type: holding
     value_type: U_WORD
     accuracy_decimals: 0
-    on_value:
-      then:
-        - lambda: |-
-            id(model_name).publish_state(value_accuracy_to_string(x, 0));
+#    on_value:
+#      then:
+#        - lambda: |-
+#            id(model_name).publish_state(value_accuracy_to_string(x, 0));
 
   - platform: modbus_controller
     name: "Serial Number"
@@ -213,9 +223,9 @@ sensor:
     unit_of_measurement: "W"
     register_type: holding
     value_type: U_DWORD
-    accuracy_decimals: 2
+    accuracy_decimals: ${${model}_power_accuracy}
     filters:
-      - multiply: 0.01
+      - multiply: ${${model}_power_multiplier}
 
   - platform: modbus_controller
     modbus_controller_id: powersupply
@@ -226,9 +236,9 @@ sensor:
     unit_of_measurement: "V"
     register_type: holding
     value_type: U_WORD
-    accuracy_decimals: ${${model}_voltage_accuracy}
+    accuracy_decimals: 2
     filters:
-      - multiply: ${${model}_voltage_multiplier}
+      - multiply: 0.01
 
   - platform: modbus_controller
     modbus_controller_id: powersupply
@@ -266,9 +276,9 @@ sensor:
     unit_of_measurement: "V"
     register_type: holding
     value_type: U_WORD
-    accuracy_decimals: ${${model}_voltage_accuracy}
+    accuracy_decimals: 2
     filters:
-      - multiply: ${${model}_voltage_multiplier}
+      - multiply: 0.01
   
   - platform: modbus_controller
     name: "Temperature"

esphome/riden-labornetzteil-6a.yaml

@@ -1,3 +1,5 @@
+# Source: https://github.com/wildekek/rdtech-esphome
+
 substitutions:
   name: "riden-labornetzteil-6a"
   friendly_name: "Riden Labornetzteil 6A"
@@ -16,6 +18,8 @@ substitutions:
   RD6006_current_maximum: "6"
   RD6006_current_accuracy: "3"
   RD6006_current_multiplier: "0.001"
+  RD6006_power_accuracy: "2"
+  RD6006_power_multiplier: "0.01"
   
   RD6006P_voltage_maximum: "60"
   RD6006P_voltage_accuracy: "3"
@@ -23,6 +27,8 @@ substitutions:
   RD6006P_current_maximum: "6"
   RD6006P_current_accuracy: "4"
   RD6006P_current_multiplier: "0.0001"
+  RD6006P_power_accuracy: "3"
+  RD6006P_power_multiplier: "0.001"
 
   RD6012_voltage_maximum: "60"
   RD6012_voltage_accuracy: "2"
@@ -30,6 +36,8 @@ substitutions:
   RD6012_current_maximum: "12"
   RD6012_current_accuracy: "2"
   RD6012_current_multiplier: "0.01"
+  RD6012_power_accuracy: "2"
+  RD6012_power_multiplier: "0.01"
 
   RD6018_voltage_maximum: "60"
   RD6018_voltage_accuracy: "2"
@@ -37,6 +45,8 @@ substitutions:
   RD6018_current_maximum: "18"
   RD6018_current_accuracy: "2"
   RD6018_current_multiplier: "0.01"
+  RD6018_power_accuracy: "2"
+  RD6018_power_multiplier: "0.01"
 
 esphome:
   name: $device_name
@@ -56,7 +66,7 @@ network:
 wifi:
   ssid: "Voltage-legacy"
   password: !secret voltage_legacy_psk
-  #use_address: riden-labornetzteil-6a.home  
+  use_address: riden-labornetzteil-6a.home  
   power_save_mode: high
   fast_connect: on
   min_auth_mode: WPA2
@@ -149,10 +159,10 @@ sensor:
     register_type: holding
     value_type: U_WORD
     accuracy_decimals: 0
-    on_value:
-      then:
-        - lambda: |-
-            id(model_name).publish_state(value_accuracy_to_string(x, 0));
+#    on_value:
+#      then:
+#        - lambda: |-
+#            id(model_name).publish_state(value_accuracy_to_string(x, 0));
 
   - platform: modbus_controller
     name: "Serial Number"
@@ -213,9 +223,9 @@ sensor:
     unit_of_measurement: "W"
     register_type: holding
     value_type: U_DWORD
-    accuracy_decimals: 2
+    accuracy_decimals: ${${model}_power_accuracy}
     filters:
-      - multiply: 0.01
+      - multiply: ${${model}_power_multiplier}
 
   - platform: modbus_controller
     modbus_controller_id: powersupply
@@ -226,9 +236,9 @@ sensor:
     unit_of_measurement: "V"
     register_type: holding
     value_type: U_WORD
-    accuracy_decimals: ${${model}_voltage_accuracy}
+    accuracy_decimals: 2
     filters:
-      - multiply: ${${model}_voltage_multiplier}
+      - multiply: 0.01
 
   - platform: modbus_controller
     modbus_controller_id: powersupply
@@ -266,9 +276,9 @@ sensor:
     unit_of_measurement: "V"
     register_type: holding
     value_type: U_WORD
-    accuracy_decimals: ${${model}_voltage_accuracy}
+    accuracy_decimals: 2
     filters:
-      - multiply: ${${model}_voltage_multiplier}
+      - multiply: 0.01
   
   - platform: modbus_controller
     name: "Temperature"

sensors.yaml

@@ -11,7 +11,7 @@
     host: !secret router_ip
     community: !secret router_community
 #    baseoid: .1.3.6.1.2.1.31.1.1.1.6.511
-    baseoid: .1.3.6.1.2.1.2.2.1.10.25
+    baseoid: .1.3.6.1.2.1.2.2.1.10.12
     version: 2c
     unit_of_measurement: "Octets"
   - platform: snmp
@@ -20,7 +20,7 @@
     host: !secret router_ip
     community: !secret router_community
 #    baseoid: .1.3.6.1.2.1.31.1.1.1.10.511
-    baseoid: .1.3.6.1.2.1.2.2.1.16.25
+    baseoid: .1.3.6.1.2.1.2.2.1.16.12
     version: 2c
     unit_of_measurement: "Octets"