.HA_VERSION

@@ -1 +1 @@
-2022.11.1
+2022.11.0

esphome/epaperframe.yaml

@@ -176,10 +176,6 @@ sensor:
     entity_id: sensor.schlafzimmer_heimkino_power
     id: media_sleepingroom
 
-  - platform: homeassistant
-    entity_id: sensor.radioaktive_strahlungsleistung
-    id: radiation
-
 text_sensor:
   - platform: homeassistant
     name: "Sun Rising ESP"
@@ -316,8 +312,7 @@ font:
       '󰴾', # mdi-transmission-tower
       '󰚥', # mdi-power-plug
       '󱈹', # mdi-desk
-      '󰔂', # mdi-television
+      '󰔂' # mdi-television
-      '󰐼' # mdi-radiation
       ]
 
   - file: 'fonts/materialdesignicons-webfont.ttf'
@@ -395,7 +390,6 @@ display:
           float outdoor_temp = id(temp_outdoor).state;
           int outdoor_humid = int(id(humid_outdoor).state);
           float air_pressure = id(airpressure).state;
-          float outdoor_radiation = id(radiation).state;
           float livingroom_temp = id(temp_livingroom).state;
           int livingroom_humid = int(id(humid_livingroom).state);
           int livingroom_pm25 = int(id(pm25_livingroom).state);
@@ -419,41 +413,31 @@ display:
           /* C1024 logo */
           it.image(10 , 37, id(c1024_logo));
 
-          it.print(10, 120, id(mdi_small), TextAlign::BASELINE_LEFT, "󰊚"); // air pressure icon
+          it.print(10, 115, id(mdi_small), TextAlign::BASELINE_LEFT, "󰊚"); // air pressure icon
-          it.print(375, 80,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer icon
+          it.print(375, 75,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer icon
-          it.print(375, 120, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent icon
+          it.print(375, 115, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent icon
-          it.print(95, 80,  id(mdi_small), TextAlign::BASELINE_LEFT, "󰐼"); // radioactive icon
-
-          if(outdoor_radiation > 0 && outdoor_radiation < 100) {
-            it.printf(200, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.2f", outdoor_radiation);
-            it.print(205, 80, id(sensor_unit), TextAlign::BASELINE_LEFT, "µS/h");
-          }
-          else {
-            it.print(200, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ");
-            it.print(205, 80, id(sensor_unit), TextAlign::BASELINE_LEFT, "µS/h");
-          }
 
           if(outdoor_temp > -100 && outdoor_temp < 100) {
-            it.printf(357, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", outdoor_temp);
+            it.printf(357, 75, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", outdoor_temp);
           }
           else {
-            it.print(357, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
+            it.print(357, 75, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
           }
 
           if(outdoor_humid >=0 && outdoor_humid <= 100) {
-            it.printf(357, 120, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", outdoor_humid);
+            it.printf(357, 115, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", outdoor_humid);
           }
           else {
-            it.print(357, 120, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
+            it.print(357, 115, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
           }
 
           if(air_pressure < 1200 && air_pressure >=800) {
-            it.printf(220, 120, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.1f", air_pressure);
+            it.printf(220, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.1f", air_pressure);
-            it.print(225, 120, id(sensor_unit), TextAlign::BASELINE_LEFT, "hPa");
+            it.print(225, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "hPa");
           }
           else {
-            it.print(220, 120, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+            it.print(220, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
-            it.print(225, 120, id(sensor_unit), TextAlign::BASELINE_LEFT, "hPa");
+            it.print(225, 114 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "hPa");
           }
 
 

esphome/geigercounter.yaml

@@ -1,69 +0,0 @@
-esphome:
-  name: geigercounter
-  platform: ESP32
-  board: nodemcu-32s
-
-wifi:
-  ssid: "Voltage-legacy"
-  password: !secret voltage_legacy_psk
-  use_address: geigercounter.home  
-  power_save_mode: high
-  fast_connect: on
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Geigercounter Fallback Hotspot"
-    password: !secret fallback_psk
-
-captive_portal:
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-  password: !secret api
-  encryption: 
-    key: !secret apikey
-
-ota:
-  password: !secret ota
-
-spi:
-  clk_pin: 16
-  mosi_pin: 19
-
-display:
-  - platform: max7219
-    cs_pin: 5
-    num_chips: 1
-    lambda: |-
-      it.print("01234567");
-
-# Here we calc and include to the firmware a power and doze values of ionizing radiation as sensor outputs
-sensor:
-  - platform: pulse_counter
-    pin: 23
-    unit_of_measurement: "µSv/h"
-    name: "Radioaktive Strahlungsleistung"
-    icon: "mdi:radioactive"
-    count_mode:
-      rising_edge: DISABLE
-      falling_edge: INCREMENT
-    update_interval: 60s
-    accuracy_decimals: 3
-    id: dose_meter
-    filters:
-      - sliding_window_moving_average: # 5-minutes moving average (MA5) here
-          window_size: 5
-          send_every: 1
-      - multiply: 0.0054 # SBM20 tube conversion factor of pulses into mkSv/Hour
-  - platform: integration
-    name: "Gesamte Strahlungsdosis"
-    unit_of_measurement: "µSv"
-    sensor: dose_meter # link entity id to the pulse_counter values above
-    icon: "mdi:radioactive"
-    accuracy_decimals: 5
-    time_unit: min # integrate values every next minute
-    filters:
-      - multiply: 0.00009 # obtained doze (from mkSv/hour into mkSv/minute) conversion factor: 0.0054 / 60 minutes = 0.00009; so pulses * 0.00009 = doze every next minute, mkSv.