Added ulility meter config.

.HA_VERSION

@@ -1 +1 @@
-2022.12.6
+2023.2.0

esphome/aussensensor.yaml

@@ -22,7 +22,6 @@ logger:
 
 # Enable Home Assistant API
 api:
-  password: !secret api
   encryption: 
     key: !secret apikey
 

esphome/epaperframe.yaml

@@ -28,7 +28,6 @@ logger:
 
 # Enable Home Assistant API
 api:
-  password: !secret api
   encryption:
     key: !secret apikey
 

esphome/geigercounter.yaml

@@ -22,7 +22,6 @@ logger:
 
 # Enable Home Assistant API
 api:
-  password: !secret api
   encryption: 
     key: !secret apikey
 
@@ -59,6 +58,10 @@ sensor:
     count_mode:
       rising_edge: DISABLE
       falling_edge: INCREMENT
+    # Hardware counter alows only 13us debounce, so we set it OFF:
+    use_pcnt: False
+    # When hw counter is OFF then we may set our filter time to SBM20 190 us Deadtime value or any other (also in microseconds):
+    internal_filter: 190us
     update_interval: 60s
     accuracy_decimals: 3
     id: dose_meter
@@ -66,7 +69,7 @@ sensor:
       - sliding_window_moving_average: # 5-minutes moving average (MA5) here
           window_size: 5
           send_every: 1
-      - multiply: 0.0054 # SBM20 tube conversion factor of pulses into µSv/Hour
+      - multiply: 0.0057 # SBM20 tube conversion factor of pulses into µSv/Hour
   - platform: integration
     name: "Gesamte Strahlungsdosis"
     unit_of_measurement: "µSv"
@@ -75,7 +78,9 @@ sensor:
     accuracy_decimals: 5
     time_unit: min # integrate values every next minute
     filters:
-      - multiply: 0.00009 # obtained doze (from mkSv/hour into mkSv/minute) conversion factor: 0.0054 / 60 minutes = 0.00009; so pulses * 0.00009 = doze every next minute, µSv.
+      # obtained dose. Converting from mkSv/hour into mkSv/minute: [mkSv/h / 60] OR [mkSv/h * 0.0166666667]. 
+      # if my_dose_meter in CPM, then [0.0054 / 60 minutes] = 0.00009; so CPM * 0.00009 = dose every next minute, mkSv.
+      - multiply: 0.0166666667
 text_sensor:
   - platform: homeassistant
     entity_id: sun.sun

esphome/livingroom.yaml

@@ -61,7 +61,6 @@ logger:
 
 # Enable Home Assistant API
 api:
-  password: !secret api
   encryption: 
     key: !secret apikey
 

esphome/raspiaudio-muse-luxe.yaml

@@ -19,7 +19,6 @@ wifi:
 
 # Enable Home Assistant API
 api:
-  password: !secret api
   encryption: 
     key: !secret apikey
 

esphome/serverroom.yaml

@@ -38,14 +38,6 @@ i2c:
 
 # DHT22 sensor
 sensor:
-#  - platform: dht
-#    model: dht22
-#    pin: 22
-#    temperature:
-#      name: "Temperatur Serverraum"
-#    humidity:
-#      name: "Luftfeuchtigkeit Serverraum"
-#    update_interval: 60s
   - platform: bmp280
     i2c_id: bus_a
     temperature:

esphome/sleepingroom.yaml

@@ -61,7 +61,6 @@ logger:
 
 # Enable Home Assistant API
 api:
-  password: !secret api
   encryption: 
     key: !secret apikey
 

utility_meters.yaml

@@ -0,0 +1,24 @@
+  internet_usage_in_monthly:
+    source: sensor.snmp_wan_in
+    name: Monthly internet traffic in
+    cycle: monthly
+  internet_usage_out_monthly:
+    source: sensor.snmp_wan_out
+    name: Monthly internet traffic out
+    cycle: monthly
+  internet_usage_in_daily:
+    source: sensor.snmp_wan_in
+    name: Daily internet traffic in
+    cycle: daily
+  internet_usage_out_daily:
+    source: sensor.snmp_wan_out
+    name: Daily internet traffic out
+    cycle: daily
+  internet_usage_in_hourly:
+    source: sensor.snmp_wan_in
+    name: Hourly internet traffic in
+    cycle: hourly
+  internet_usage_out_hourly:
+    source: sensor.snmp_wan_out
+    name: Hourly internet traffic out
+    cycle: hourly