Fixed bug with N/A value display in PM2.5 sensor display.

esphome/epaperframe.yaml

@@ -83,6 +83,22 @@ sensor:
     entity_id: sensor.wohnzimmer_co2
     id: co2_livingroom
 
+  - platform: homeassistant
+    entity_id: sensor.feinstaub_pm_2_5um 
+    id: pm25_sleepingroom
+
+  - platform: homeassistant
+    entity_id: sensor.schlafzimmer_temperatur
+    id: temp_sleepingroom
+  
+  - platform: homeassistant
+    entity_id: sensor.schlafzimmer_luftfeuchtigkeit
+    id: humid_sleepingroom
+
+  - platform: homeassistant
+    entity_id: sensor.schlafzimmer_co2
+    id: co2_sleepingroom
+  
   - platform: homeassistant
     entity_id: sensor.temperatur_aussen
     id: temp_outdoor
@@ -131,6 +147,15 @@ web_server:
 time:
   - platform: homeassistant
     id: homeassistant_time
+    on_time:
+    # Every 5 minutes
+    - seconds: 0
+      minutes: /10
+      then:
+      - logger.log:
+          level: INFO
+          format: 'Timer based screen refresh'
+      - component.update: epaper
 
 # Font definitions
 font:
@@ -241,6 +266,10 @@ display:
       int livingroom_humid = int(id(humid_livingroom).state);
       int livingroom_pm25 = int(id(pm25_livingroom).state);
       float livingroom_co2 = id(co2_livingroom).state;
+      float sleepingroom_temp = id(temp_sleepingroom).state;
+      int sleepingroom_humid = int(id(humid_sleepingroom).state);
+      int sleepingroom_pm25 = int(id(pm25_sleepingroom).state);
+      float sleepingroom_co2 = id(co2_sleepingroom).state;
       char sunrise[5] = "";
       char sunset[5] = "";
 
@@ -351,52 +380,94 @@ display:
       }
 
       /* Livingroom */
-
-      int offsetY = 137;
+      int offsetY = 127;
       it.print(10, 10 + offsetY, id(big_sensor_unit), "Wohnzimmer");
       it.filled_rectangle(136, 21 + offsetY, 247, 3);
-      it.print(10, 114 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "PM2.5");
+      it.print(10, 114 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
       it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
       it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
-      it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // co2
+      it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
+      
 
       if(livingroom_temp > -100 && livingroom_temp < 100) {
         it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", livingroom_temp);
-      }else{
+      }
+      else {
         it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
       }
 
       if(livingroom_humid >=0 && livingroom_humid <= 100) {
         it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", livingroom_humid);
-      }else{
+      }
+      else {
         it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
       }
 
       if(livingroom_co2 >=380 && livingroom_co2 <= 20000) {
-        it.printf(50, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT , "%4.1fppm", livingroom_co2);
-      }else{
-        it.print(50, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT , " -  ppm");
+        it.printf(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", livingroom_co2);
+        it.print(150, 50 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
+      }
+      else {
+        it.print(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+        it.print(150, 50 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
       }
 
       if(livingroom_pm25 < 255 && livingroom_pm25 >=0) {
-        if (livingroom_pm25 > 99){
-          it.printf(205, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT , "%3d", livingroom_pm25);
-          it.print(210, 114 + offsetY, id(big_sensor_unit),TextAlign::BASELINE_LEFT, "µg/m³");
-        }else{
-          it.printf(175, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT , "%2d", livingroom_pm25);
-          it.print(180, 114 + offsetY, id(big_sensor_unit),TextAlign::BASELINE_LEFT, "µg/m³");
-        }
-
+        it.printf(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", livingroom_pm25);
+        it.print(205, 114 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
         if(livingroom_pm25 >= pm25_danger_thres) {
-          it.print(37, 87 + offsetY, id(mdi_med), TextAlign::BASELINE_CENTER, "󰀦"); // warning
+          it.print(37, 114 + offsetY, id(mdi_med), TextAlign::BASELINE_CENTER, "󰀦"); // warning
         }
-
       }
       else {
-        it.print(175, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT , "- ");
-        it.print(180, 114 + offsetY, id(big_sensor_unit),TextAlign::BASELINE_LEFT, "µg/m³");
+        it.print(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+        it.print(205, 114 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
       } 
 
+      /* Sleepingroom */
+      offsetY = 247;
+      it.print(10, 10 + offsetY, id(big_sensor_unit), "Schlafzimmer");
+      it.filled_rectangle(136, 21 + offsetY, 247, 3);
+      it.print(10, 114 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
+      it.print(375, 75 + offsetY,  id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
+      it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
+      it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
+      
+
+      if(sleepingroom_temp > -100 && sleepingroom_temp < 100) {
+        it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", sleepingroom_temp);
+      }
+      else {
+        it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
+      }
+
+      if(sleepingroom_humid >=0 && sleepingroom_humid <= 100) {
+        it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", sleepingroom_humid);
+      }
+      else {
+        it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " -  %");
+      }
+
+      if(sleepingroom_co2 >=380 && sleepingroom_co2 <= 20000) {
+        it.printf(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", sleepingroom_co2);
+        it.print(150, 50 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
+      }
+      else {
+        it.print(150, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+        it.print(150, 50 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
+      }
+
+      if(sleepingroom_pm25 < 255 && sleepingroom_pm25 >=0) {
+        it.printf(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", sleepingroom_pm25);
+        it.print(205, 114 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
+        if(sleepingroom_pm25 >= pm25_danger_thres) {
+          it.print(37, 114 + offsetY, id(mdi_med), TextAlign::BASELINE_CENTER, "󰀦"); // warning
+        }
+      }
+      else {
+        it.print(200, 114 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
+        it.print(205, 114 + offsetY, id(big_sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
+      } 
 
       /* FOOTER */
       it.strftime(610, 374 , id(footer_font), TextAlign::BASELINE_RIGHT , "Aktualisiert um %d.%m.%Y %H:%M", id(homeassistant_time).now());