homeassistant-config/esphome/kamera-wohnzimmer.yaml

78 lines
1.4 KiB
YAML

substitutions:
name: kamera-wohnzimmer
friendly_name: Kamera Wohnzimmer
esphome:
name: ${name}
friendly_name: ${friendly_name}
name_add_mac_suffix: false
project:
name: sensor.camera
version: "1.0"
min_version: 2022.1.0
esp32:
board: esp32dev
framework:
type: arduino
wifi:
ssid: "Voltage-legacy"
password: !secret voltage_legacy_psk
use_address: ${name}.home
power_save_mode: high
fast_connect: on
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Cam Wohnzimmer Fallback Hotspot"
password: !secret fallback_psk
captive_portal:
# Enable logging
logger:
# Enable Home Assistant API
api:
encryption:
key: !secret apikey
ota:
password: !secret ota
# Camera
esp32_camera:
name: ${friendly_name}
external_clock:
pin: GPIO0
frequency: 20MHz
i2c_pins:
sda: GPIO26
scl: GPIO27
data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
vsync_pin: GPIO25
href_pin: GPIO23
pixel_clock_pin: GPIO22
power_down_pin: GPIO32
resolution: SVGA
max_framerate: 24 fps
idle_framerate: 0.2 fps
jpeg_quality: 30
vertical_flip: true
horizontal_mirror: true
# Flash LED
output:
- platform: ledc
pin: GPIO4
id: flash
channel: 2
# Define RGB mode for LED
light:
- platform: monochromatic
id: flashlight
name: "Blitzlicht"
output: flash