homeassistant-config/esphome/epaperframe.yaml

854 lines
32 KiB
YAML

substitutions:
name: epaperframe
friendly_name: "Info-Dashboard"
esphome:
name: ${name}
friendly_name: ${friendly_name}
name_add_mac_suffix: false
project:
name: dashboard.epaper
version: "1.0"
min_version: 2022.4.0
on_boot:
priority: -10
then:
- delay: 10s
- display.page.show: power # temporary for power page dev
- component.update: epaper
esp32:
board: nodemcu-32s
framework:
type: arduino
wifi:
ssid: "Voltage-legacy"
password: !secret voltage_legacy_psk
use_address: epaperframe.home
power_save_mode: high
fast_connect: on
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Epaperframe Fallback Hotspot"
password: !secret fallback_psk
captive_portal:
# Enable logging
logger:
# Enable Home Assistant API
api:
encryption:
key: !secret apikey
ota:
password: !secret ota
# Power key of li-ion charger
output:
- platform: gpio
pin:
number: GPIO15
inverted: true
mode:
output: true
id: power_key
# Refresh screen on button click
binary_sensor:
- platform: gpio
pin:
number: GPIO18
mode: INPUT_PULLUP
inverted: True
name: "Refresh screen"
internal: True
on_multi_click:
- timing:
- ON for at most 1s
- OFF for at most 0.3s
- ON for at most 1s
- OFF for at least 0.2s
then:
- logger.log:
level: INFO
format: 'Button doubleclick, rendering next page!'
- display.page.show_next: epaper
- component.update: epaper
- timing:
- ON for at most 1s
- OFF for at least 0.5s
then:
- logger.log:
level: INFO
format: 'Button click, refreshing screen!'
- component.update: epaper
# HA pushbutton configuration
button:
- platform: template
name: Refresh screen
id: refresh_button
icon: "mdi:refresh"
on_press:
- logger.log:
level: INFO
format: 'HA Button click, refreshing screen!'
- component.update: epaper
- platform: template
name: Next screen
id: next_button
icon: "mdi:skip-next"
on_press:
- logger.log:
level: INFO
format: 'HA Button click, rendering next page!'
- display.page.show_next: epaper
- component.update: epaper
sensor:
# WiFi signal strength
- platform: wifi_signal
name: "WiFi Signalstärke"
id: wifisignal
update_interval: 60s
- platform: homeassistant
entity_id: sensor.wohnzimmer_feinstaub_pm_2_5um
id: pm25_livingroom
- platform: homeassistant
entity_id: sensor.wohnzimmer_temperatur
id: temp_livingroom
- platform: homeassistant
entity_id: sensor.wohnzimmer_luftfeuchtigkeit
id: humid_livingroom
- platform: homeassistant
entity_id: sensor.wohnzimmer_co2
id: co2_livingroom
- platform: homeassistant
entity_id: sensor.feinstaub_pm_2_5um
id: pm25_sleepingroom
- platform: homeassistant
entity_id: sensor.schlafzimmer_temperatur
id: temp_sleepingroom
- platform: homeassistant
entity_id: sensor.schlafzimmer_luftfeuchtigkeit
id: humid_sleepingroom
- platform: homeassistant
entity_id: sensor.schlafzimmer_co2
id: co2_sleepingroom
- platform: homeassistant
entity_id: sensor.temperatur_aussen
id: temp_outdoor
- platform: homeassistant
entity_id: sensor.auriol_ahfl_1_106_h
id: humid_outdoor
- platform: homeassistant
entity_id: sensor.luftdruck
id: airpressure
- platform: homeassistant
entity_id: sensor.serveraum_temperatur
id: temp_serverroom
- platform: homeassistant
entity_id: sensor.netzleistung
id: power_total
- platform: homeassistant
entity_id: sensor.serverraum_power
id: power_serverroom
- platform: homeassistant
entity_id: sensor.schreibtisch_power
id: desk_livingroom
- platform: homeassistant
entity_id: sensor.wohnzimmer_heimkino_power
id: media_livingroom
- platform: homeassistant
entity_id: sensor.schlafzimmer_bett_power
id: bedlight_sleepingroom
- platform: homeassistant
entity_id: sensor.schlafzimmer_heimkino_power
id: media_sleepingroom
- platform: homeassistant
entity_id: sensor.radioaktive_strahlungsleistung
id: radiation
text_sensor:
- platform: homeassistant
name: "Sun Rising ESP"
entity_id: sensor.sun_rising_template
id: sun_rising
internal: true
- platform: homeassistant
name: "Sun Setting ESP"
entity_id: sensor.sun_setting_template
id: sun_setting
internal: true
- platform: homeassistant
entity_id: sensor.moon
id: moonphase
- platform: homeassistant
entity_id: weather.zuhause
id: weather
- platform: homeassistant
entity_id: sensor.schlafzimmer_co2_warnstufe
id: szco2
- platform: homeassistant
entity_id: sensor.schlafzimmer_feinstaub_warnstufe
id: szpm
- platform: homeassistant
entity_id: sensor.wohnzimmer_co2_warnstufe
id: wzco2
- platform: homeassistant
entity_id: sensor.wohnzimmer_feinstaub_warnstufe
id: wzpm
graph:
- id: line_power_graph
sensor: power_total
duration: 2h
width: 235
height: 100
time:
- platform: homeassistant
id: homeassistant_time
on_time:
# Every 10 seconds
- seconds: /10
then:
- logger.log:
level: INFO
format: 'Power button press'
- output.turn_on: power_key
- delay: 0.5s
- output.turn_off: power_key
# Every 10 minutes
- seconds: 0
minutes: /10
then:
- logger.log:
level: INFO
format: 'Timer based screen refresh'
- component.update: epaper
# Font definitions
font:
- file: 'fonts/Roboto-Medium.ttf'
id: roboto_med_30
size: 30
- file: 'fonts/Roboto-Regular.ttf'
id: footer_font
size: 15
glyphs:
['&', '@', '!', ',', '.', '"', '%', '(', ')', '+', '-', '_', ':', '°',
'1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E',
'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S',
'T', 'U', 'V', 'W', 'X', 'Y', 'Z', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
'u', 'v', 'w', 'x', 'y', 'z', 'Ä', 'ä', 'ö', '/', 'º', 'µ', '³', 'ß',
'Ü', 'ü', 'Ö', '0']
- file: 'fonts/Roboto-Regular.ttf'
id: sensor_unit
size: 20
glyphs:
['&', '@', '!', ',', '.', '"', '%', '(', ')', '+', '-', '_', ':', '°',
'1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E',
'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S',
'T', 'U', 'V', 'W', 'X', 'Y', 'Z', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
'u', 'v', 'w', 'x', 'y', 'z', 'Ä', 'ä', 'ö', '/', 'º', 'µ', '³', 'ß',
'Ü', 'ü', 'Ö', '0']
- file: 'fonts/Roboto-Medium.ttf'
id: sub_sensor_font
size: 30
glyphs:
['&', '@', '!', ',', '.', '"', '%', '(', ')', '+', '-', '_', ':', '°',
'1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E',
'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S',
'T', 'U', 'V', 'W', 'X', 'Y', 'Z', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
'u', 'v', 'w', 'x', 'y', 'z', 'Ä', 'ä', 'ö', '/', 'º', 'µ', '³', 'ß',
'Ü', 'ü', 'Ö', '0']
- file: 'fonts/Roboto-Bold.ttf'
id: big_sensor_font
size: 50
glyphs:
['&', '@', '!', ',', '.', '"', '%', '(', ')', '+', '-', '_', ':', '°',
'1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E',
'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S',
'T', 'U', 'V', 'W', 'X', 'Y', 'Z', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
'u', 'v', 'w', 'x', 'y', 'z', 'Ä', 'ä', 'ö', '/', 'º', 'µ', '³', 'ß',
'Ü', 'ü', 'Ö', '0']
- file: 'fonts/materialdesignicons-webfont.ttf'
id: mdi_small
size: 31
glyphs: [
'󰔏', # mdi-thermometer
'󰖎', # mdi-water-percent
'󰮬', # mdi-molecule (pm2.5)
'󰟤', # mdi-co2
'󰊚', # mdi-gauge (air pressure)
'󰖙', # mdi-weather-sunny
'󰖛', # mdi-weather-sunset-down
'󰖜', # mdi-weather-sunset-up
'󱐋', # mdi-lightning-bolt
'󰴾', # mdi-transmission-tower
'󰚥', # mdi-power-plug
'󱈹', # mdi-desk
'󰔂', # mdi-television
'󰐼' # mdi-radiation
]
- file: 'fonts/materialdesignicons-webfont.ttf'
id: mdi_weather
size: 80
glyphs: [
'󰽡', # mdi-moon-first-quarter
'󰽢', # mdi-moon-full
'󰽣', # mdi-moon-last-quarter
'󰽤', # mdi-moon-new
'󰽥', # mdi-moon-waning-crescent
'󰽦', # mdi-moon-waning-gibbous
'󰽧', # mdi-moon-waxing-crescent
'󰽨', # mdi-moon-waxing-gibbous
'󰖔', # mdi-weather-night
'󰖐', # mdi-weather-cloudy
'󰖑', # mdi-weather-fog
'󰖒', # mdi-weather-hail
'󰖓', # mdi-weather-lightning
'󰙾', # mdi-weather-lightning-rainy
'󰖕', # mdi-weather-partly-cloudy
'󰖖', # mdi-weather-pouring
'󰖗', # mdi-weather-rainy
'󰖘', # mdi-weather-snowy
'󰙿', # mdi-weather-snowy-rainy
'󰖙', # mdi-weather-sunny
'󰖝', # mdi-weather-windy
'󰖞', # mdi-weather-windy-variant
'󰳥' # mdi-weather-exceptional
]
- file: 'fonts/materialdesignicons-webfont.ttf'
id: mdi_wifi
size: 20
glyphs: [
# WiFi
'󰤫', # mdi-wifi-strength-alert-outline
'󰤟', # mdi-wifi-strength-1
'󰤢', # mdi-wifi-strength-2
'󰤥', # mdi-wifi-strength-3
'󰤨' # mdi-wifi-strength-4
]
- file: 'fonts/materialdesignicons-webfont.ttf'
id: mdi_med
size: 60
glyphs: [
'󰀦' # mdi-alert
]
image:
- file: "epaperframe/C1024_logo_flat_bw.png"
id: c1024_logo
type: binary
resize: 77x40
spi:
clk_pin: 23
mosi_pin: 22
display:
- platform: waveshare_epaper
id: epaper
cs_pin: 19
dc_pin: 21
busy_pin: 16
reset_pin: 17
model: 7.50in
# full_update_every: 30 # not supported on this display
update_interval: never
pages:
- id: environment
lambda: |-
float outdoor_temp = id(temp_outdoor).state;
int outdoor_humid = int(id(humid_outdoor).state);
float air_pressure = id(airpressure).state;
float outdoor_radiation = id(radiation).state;
float livingroom_temp = id(temp_livingroom).state;
int livingroom_humid = int(id(humid_livingroom).state);
int livingroom_pm25 = int(id(pm25_livingroom).state);
float livingroom_co2 = id(co2_livingroom).state;
float sleepingroom_temp = id(temp_sleepingroom).state;
int sleepingroom_humid = int(id(humid_sleepingroom).state);
int sleepingroom_pm25 = int(id(pm25_sleepingroom).state);
float sleepingroom_co2 = id(co2_sleepingroom).state;
float serverroom_temp = id(temp_serverroom).state;
int offsetX = 0;
int offsetY = 0;
/* OUTSIDE */
it.print(10, 10, id(sensor_unit), "Umwelt");
/*
Draw the outline of a rectangle with the top left at [86,21],
a width of 297 and a height of 3
*/
it.filled_rectangle(86, 21, 297, 3);
/* C1024 logo */
it.image(10 , 37, id(c1024_logo));
it.print(10, 130, id(mdi_small), TextAlign::BASELINE_LEFT, "󰊚"); // air pressure icon
it.print(375, 80, id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer icon
it.print(375, 130, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent icon
it.print(95, 80, id(mdi_small), TextAlign::BASELINE_LEFT, "󰐼"); // radioactive icon
if(outdoor_radiation > 0 && outdoor_radiation < 100) {
it.printf(200, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.2f", outdoor_radiation);
it.print(205, 80, id(sensor_unit), TextAlign::BASELINE_LEFT, "µS/h");
}
else {
it.print(200, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ");
it.print(205, 80, id(sensor_unit), TextAlign::BASELINE_LEFT, "µS/h");
}
if(outdoor_temp > -100 && outdoor_temp < 100) {
it.printf(357, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", outdoor_temp);
}
else {
it.print(357, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
}
if(outdoor_humid >=0 && outdoor_humid <= 100) {
it.printf(357, 130, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", outdoor_humid);
}
else {
it.print(357, 130, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - %");
}
if(air_pressure < 1200 && air_pressure >=800) {
it.printf(220, 130, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.1f", air_pressure);
it.print(225, 130, id(sensor_unit), TextAlign::BASELINE_LEFT, "hPa");
}
else {
it.print(220, 130, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
it.print(225, 130, id(sensor_unit), TextAlign::BASELINE_LEFT, "hPa");
}
/* Livingroom */
offsetY = 127;
it.print(10, 10 + offsetY, id(sensor_unit), "Wohnzimmer");
it.filled_rectangle(136, 21 + offsetY, 247, 3);
it.print(10, 125 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
it.print(375, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
it.print(375, 125 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
if(livingroom_temp > -100 && livingroom_temp < 100) {
it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", livingroom_temp);
}
else {
it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
}
if(livingroom_humid >=0 && livingroom_humid <= 100) {
it.printf(357, 125 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", livingroom_humid);
}
else {
it.print(357, 125 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - %");
}
if(livingroom_co2 >=380 && livingroom_co2 <= 20000) {
it.printf(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", livingroom_co2);
it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
}
else {
it.print(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
}
if(livingroom_pm25 < 255 && livingroom_pm25 >=0) {
it.printf(220, 125 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", livingroom_pm25);
it.print(225, 125 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
}
else {
it.print(220, 125 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
it.print(225, 125 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
}
/* Sleepingroom */
offsetY = 247;
it.print(10, 10 + offsetY, id(sensor_unit), "Schlafzimmer");
it.filled_rectangle(144, 21 + offsetY, 239, 3);
it.print(10, 124 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰮬"); // PM2.5
it.print(375, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
it.print(375, 124 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent
it.print(10, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_LEFT, "󰟤"); // CO2
if(sleepingroom_temp > -100 && sleepingroom_temp < 100) {
it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1fºC", sleepingroom_temp);
}
else {
it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
}
if(sleepingroom_humid >=0 && sleepingroom_humid <= 100) {
it.printf(357, 125 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%3d%%", sleepingroom_humid);
}
else {
it.print(357, 125 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - %");
}
if(sleepingroom_co2 >=380 && sleepingroom_co2 <= 20000) {
it.printf(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%4.0f", sleepingroom_co2);
it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm");
}
else {
it.print(170, 75 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
it.print(175, 50 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "ppm³");
}
if(sleepingroom_pm25 < 255 && sleepingroom_pm25 >=0) {
it.printf(220, 125 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%3d", sleepingroom_pm25);
it.print(225, 125 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
}
else {
it.print(220, 125 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "- ");
it.print(225, 125 + offsetY, id(sensor_unit), TextAlign::BASELINE_LEFT, "µg/m³");
}
/* Weather */
offsetX = 390;
it.print(10 + offsetX, 10, id(sensor_unit), "Wetter");
it.filled_rectangle(80 + offsetX, 21, 155, 3);
/* Current weather */
if(id(weather).has_state()) {
int x = 227 + offsetX;
int y = 116;
if (id(weather).state == "clear-night") {
// clear night
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖔");
ESP_LOGI("Weather", "clear night");
} else if (id(weather).state == "cloudy") {
// cloudy
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖐");
ESP_LOGI("Weather", "cloudy");
} else if (id(weather).state == "fog") {
// fog
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖑");
ESP_LOGI("Weather", "fog");
} else if (id(weather).state == "hail") {
// hail
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖒");
ESP_LOGI("Weather", "hail");
} else if (id(weather).state == "lightning") {
// lightning
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖓");
ESP_LOGI("Weather", "lightning");
} else if (id(weather).state == "lightning-rainy") {
// lightning-rainy
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰙾");
ESP_LOGI("Weather", "lightning-rainy");
} else if (id(weather).state == "partlycloudy") {
// partly cloudy
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖕");
ESP_LOGI("Weather", "partlycloudy");
} else if (id(weather).state == "pouring") {
// pouring
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖖");
ESP_LOGI("Weather", "pouring");
} else if (id(weather).state == "rainy") {
// rainy
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖗");
ESP_LOGI("Weather", "rainy");
} else if (id(weather).state == "snowy") {
// snowy
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖘");
ESP_LOGI("Weather", "snowy");
} else if (id(weather).state == "snowy-rainy") {
// snowy-rainy
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰙿");
ESP_LOGI("Weather", "snowy-rainy");
} else if (id(weather).state == "sunny") {
// sunny
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖙");
ESP_LOGI("Weather", "sunny");
} else if (id(weather).state == "windy") {
// windy
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖝");
ESP_LOGI("Weather", "windy");
} else if (id(weather).state == "windy-variant") {
// windy variant
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰖞");
ESP_LOGI("Weather", "windy variant");
} else if (id(weather).state == "exceptional") {
// exceptional
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_RIGHT, "󰳥");
ESP_LOGI("Weather", "exceptional");
} else {
// N/A
it.print(x, y, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "-");
ESP_LOGE("Weather", "No data");
}
}
/* Moon phase display */
if(id(moonphase).has_state()) {
int x = 10 + offsetX;
int y = 116;
if (id(moonphase).state == "new_moon") {
// new moon
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽤");
ESP_LOGI("Moonphase", "new moon");
} else if (id(moonphase).state == "waxing_crescent") {
// waxing crescent
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽧");
ESP_LOGI("Moonphase", "waxing crescent");
} else if (id(moonphase).state == "first_quarter") {
// first_quarter
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽡");
ESP_LOGI("Moonphase", "first quarter");
} else if (id(moonphase).state == "waxing_gibbous") {
// waxing gibbous
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽨");
ESP_LOGI("Moonphase", "waxing gibbous");
} else if (id(moonphase).state == "full_moon") {
// full moon
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽢");
ESP_LOGI("Moonphase", "full moon");
} else if (id(moonphase).state == "waning_gibbous") {
// waning gibbous
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽦");
ESP_LOGI("Moonphase", "waning gibbous");
} else if (id(moonphase).state == "last_quarter") {
// last quarter
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽣");
ESP_LOGI("Moonphase", "last quarter");
} else if (id(moonphase).state == "waning_crescent") {
// waning crescent
it.print(x, y, id(mdi_weather), TextAlign::BASELINE_LEFT, "󰽥");
ESP_LOGI("Moonphase", "waning crescent");
} else {
// N/A
it.print(x, y, id(big_sensor_font), TextAlign::BASELINE_LEFT, "-");
ESP_LOGE("Moonphase", "No data");
}
}
/* Warnings */
if(id(szco2).state == "rot" || id(szpm).state == "rot" || id(wzco2).state == "rot" || id(wzpm).state == "rot") {
it.print(10 + offsetX, 200, id(mdi_med), TextAlign::BASELINE_LEFT, "󰀦");
it.print(80 + offsetX, 200, id(big_sensor_font), TextAlign::BASELINE_LEFT, "Lüften!");
}
it.print(10 + offsetX, 250, id(mdi_small), TextAlign::BASELINE_LEFT, "󰖜"); // sun-up
it.printf(50 + offsetX, 250, id(sensor_unit), TextAlign::BASELINE_LEFT, "%s", id(sun_rising).state.c_str());
it.print(135 + offsetX, 250, id(mdi_small), TextAlign::BASELINE_LEFT, "󰖛"); // sun-down
it.printf(175 + offsetX, 250, id(sensor_unit), TextAlign::BASELINE_LEFT, "%s", id(sun_setting).state.c_str());
/* Serverroom */
offsetY = 247;
it.print(10 + offsetX, 10 + offsetY, id(sensor_unit), "Serverraum");
it.filled_rectangle(125 + offsetX, 21 + offsetY, 110, 3);
it.print(227 + offsetX, 110 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰔏"); // thermometer
if(serverroom_temp > -100 && serverroom_temp < 100) {
it.printf(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "ºC");
it.printf(170 + offsetX, 110 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", serverroom_temp);
}
else {
it.print(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - ºC");
}
/* FOOTER */
it.strftime(614, 380, id(footer_font), TextAlign::BASELINE_RIGHT , "Aktualisiert um %d.%m.%Y %H:%M", id(homeassistant_time).now());
/* WiFi Signal Strenght */
if(id(wifisignal).has_state()) {
int x = 630;
int y = 384;
if (id(wifisignal).state >= -50) {
// Excellent
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤨");
ESP_LOGI("WiFi", "Excellent");
} else if (id(wifisignal).state >= -60) {
// Good
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤥");
ESP_LOGI("WiFi", "Good");
} else if (id(wifisignal).state >= -75) {
// Fair
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤢");
ESP_LOGI("WiFi", "Fair");
} else if (id(wifisignal).state >= -100) {
// Weak
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤟");
ESP_LOGI("WiFi", "Weak");
} else {
// Unlikely working signal
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤫");
ESP_LOGI("WiFi", "Unlikely");
}
}
- id: power
lambda: |-
float total_power = id(power_total).state;
float serverroom_power = id(power_serverroom).state;
float livingroom_desk = id(desk_livingroom).state;
float livingroom_media = id(media_livingroom).state;
float sleepingroom = id(media_sleepingroom).state + id(bedlight_sleepingroom).state;
int offsetX = 0;
int offsetY = 0;
/* BASEMENT */
it.print(10, 10, id(sensor_unit), "Keller");
/*
Draw the outline of a rectangle with the top left at [86,21],
a width of 297 and a height of 3
*/
it.filled_rectangle(76, 21, 307, 3);
/* C1024 logo */
it.image(10 , 37, id(c1024_logo));
/* Livingroom */
offsetY = 127;
it.print(10, 10 + offsetY, id(sensor_unit), "Wohnzimmer");
it.filled_rectangle(136, 21 + offsetY, 247, 3);
it.print(375, 75 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
it.print(20, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT, "Schreibtisch");
if(livingroom_desk >= 0) {
it.printf(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f W", livingroom_desk);
}
else {
it.print(357, 75 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - W");
}
it.print(20, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT, "Heimkino");
if(livingroom_media >= 0) {
it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f W", livingroom_media);
}
else {
it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - W");
}
/* Sleepingroom */
offsetY = 247;
it.print(10, 10 + offsetY, id(sensor_unit), "Schlafzimmer");
it.filled_rectangle(144, 21 + offsetY, 239, 3);
it.print(375, 115 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
// it.print(20, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_LEFT, "Heimkino");
if(sleepingroom >= 0) {
it.printf(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f W", sleepingroom);
}
else {
it.print(357, 115 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - W");
}
/* LINEPOWER */
offsetX = 390;
offsetY = 65;
it.print(10 + offsetX, 10, id(sensor_unit), "Gesamt");
it.filled_rectangle(90 + offsetX, 21, 155, 3);
it.print(227 + offsetX, 20 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰴾"); // transmission-tower
if(total_power >= 0) {
it.printf(207 + offsetX, 20 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "W");
it.printf(170 + offsetX, 20 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", total_power);
}
else {
it.print(207 + offsetX, 20 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - W");
}
it.graph(10 + offsetX, 30 + offsetY, id(line_power_graph));
/* Serverroom */
offsetY = 247;
it.print(10 + offsetX, 10 + offsetY, id(sensor_unit), "Serverraum");
it.filled_rectangle(125 + offsetX, 21 + offsetY, 110, 3);
it.print(227 + offsetX, 110 + offsetY, id(mdi_small), TextAlign::BASELINE_CENTER, "󰚥"); // power-plug
if(serverroom_power >= 0) {
it.printf(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "W");
it.printf(170 + offsetX, 110 + offsetY, id(big_sensor_font), TextAlign::BASELINE_RIGHT, "%2.1f", serverroom_power);
}
else {
it.print(207 + offsetX, 110 + offsetY, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, " - W");
}
/* FOOTER */
it.strftime(614, 380, id(footer_font), TextAlign::BASELINE_RIGHT , "Aktualisiert um %d.%m.%Y %H:%M", id(homeassistant_time).now());
/* WiFi Signal Strenght */
if(id(wifisignal).has_state()) {
int x = 630;
int y = 384;
if (id(wifisignal).state >= -50) {
// Excellent
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤨");
ESP_LOGI("WiFi", "Excellent");
} else if (id(wifisignal).state >= -60) {
// Good
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤥");
ESP_LOGI("WiFi", "Good");
} else if (id(wifisignal).state >= -75) {
// Fair
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤢");
ESP_LOGI("WiFi", "Fair");
} else if (id(wifisignal).state >= -100) {
// Weak
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤟");
ESP_LOGI("WiFi", "Weak");
} else {
// Unlikely working signal
it.print(x, y, id(mdi_wifi), TextAlign::BASELINE_CENTER, "󰤫");
ESP_LOGI("WiFi", "Unlikely");
}
}