homeassistant-config/esphome/m5stack-atom-echo.yaml

327 lines
7.4 KiB
YAML

substitutions:
name: "m5stack-atom-echo"
friendly_name: "M5Stack Atom Echo"
esphome:
name: ${name}
friendly_name: ${friendly_name}
name_add_mac_suffix: False
project:
name: m5stack.atom-echo-voice-assistant
version: "24.7.24"
min_version: 2024.9.0
esp32:
board: m5stack-atom
framework:
type: esp-idf
# Enable Home Assistant API
api:
encryption:
key: !secret apikey
ota:
- platform: esphome
password: !secret ota
id: ota_esphome
- platform: http_request
id: ota_http_request
update:
- platform: http_request
id: update_http_request
name: Firmware
source: https://firmware.esphome.io/voice-assistant/m5stack-atom-echo/manifest.json
http_request:
wifi:
on_connect:
- delay: 5s # Gives time for improv results to be transmitted
- ble.disable:
on_disconnect:
- ble.enable:
ssid: Voltage-legacy
password: !secret voltage_legacy_psk
use_address: ${name}.home
power_save_mode: high
fast_connect: on
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Raspiaudio Fallback Hotspot"
password: !secret fallback_psk
improv_serial:
esp32_improv:
authorizer: none
logger:
dashboard_import:
package_import_url: github://esphome/firmware/voice-assistant/m5stack-atom-echo.adopted.yaml@main
captive_portal:
button:
- platform: safe_mode
id: button_safe_mode
name: Safe Mode Boot
- platform: factory_reset
id: factory_reset_btn
name: Factory reset
i2s_audio:
- id: i2s_audio_bus
i2s_lrclk_pin: GPIO33
i2s_bclk_pin: GPIO19
microphone:
- platform: i2s_audio
id: echo_microphone
i2s_din_pin: GPIO23
adc_type: external
pdm: true
speaker:
- platform: i2s_audio
id: echo_speaker
i2s_dout_pin: GPIO22
dac_type: external
channel: mono
voice_assistant:
id: va
microphone: echo_microphone
speaker: echo_speaker
noise_suppression_level: 2
auto_gain: 31dBFS
volume_multiplier: 2.0
vad_threshold: 3
on_listening:
- light.turn_on:
id: led
blue: 100%
red: 0%
green: 0%
effect: "Slow Pulse"
on_stt_vad_end:
- light.turn_on:
id: led
blue: 100%
red: 0%
green: 0%
effect: "Fast Pulse"
on_tts_start:
- light.turn_on:
id: led
blue: 100%
red: 0%
green: 0%
brightness: 100%
effect: none
on_end:
- delay: 100ms
- wait_until:
not:
speaker.is_playing:
- script.execute: reset_led
on_error:
- light.turn_on:
id: led
red: 100%
green: 0%
blue: 0%
brightness: 100%
effect: none
- delay: 1s
- script.execute: reset_led
on_client_connected:
- if:
condition:
switch.is_on: use_wake_word
then:
- voice_assistant.start_continuous:
- script.execute: reset_led
on_client_disconnected:
- if:
condition:
switch.is_on: use_wake_word
then:
- voice_assistant.stop:
- light.turn_off: led
on_timer_finished:
- voice_assistant.stop:
- switch.turn_on: timer_ringing
- wait_until:
not:
microphone.is_capturing:
- light.turn_on:
id: led
red: 0%
green: 100%
blue: 0%
brightness: 100%
effect: "Fast Pulse"
- while:
condition:
switch.is_on: timer_ringing
then:
- lambda: id(echo_speaker).play(id(timer_finished_wave_file), sizeof(id(timer_finished_wave_file)));
- delay: 1s
- wait_until:
not:
speaker.is_playing:
- light.turn_off: led
- switch.turn_off: timer_ringing
- if:
condition:
switch.is_on: use_wake_word
then:
- voice_assistant.start_continuous:
- script.execute: reset_led
binary_sensor:
- platform: gpio
pin:
number: GPIO39
inverted: true
name: Button
disabled_by_default: true
entity_category: diagnostic
id: echo_button
on_multi_click:
- timing:
- ON for at least 50ms
- OFF for at least 50ms
then:
- if:
condition:
switch.is_on: timer_ringing
then:
- switch.turn_off: timer_ringing
else:
- if:
condition:
switch.is_off: use_wake_word
then:
- if:
condition: voice_assistant.is_running
then:
- voice_assistant.stop:
- script.execute: reset_led
else:
- voice_assistant.start:
else:
- voice_assistant.stop
- delay: 1s
- script.execute: reset_led
- script.wait: reset_led
- voice_assistant.start_continuous:
- timing:
- ON for at least 10s
then:
- button.press: factory_reset_btn
light:
- platform: esp32_rmt_led_strip
id: led
name: None
disabled_by_default: true
entity_category: config
pin: GPIO27
default_transition_length: 0s
chipset: SK6812
num_leds: 1
rgb_order: grb
rmt_channel: 0
effects:
- pulse:
name: "Slow Pulse"
transition_length: 250ms
update_interval: 250ms
min_brightness: 50%
max_brightness: 100%
- pulse:
name: "Fast Pulse"
transition_length: 100ms
update_interval: 100ms
min_brightness: 50%
max_brightness: 100%
script:
- id: reset_led
then:
- if:
condition:
- switch.is_on: use_wake_word
- switch.is_on: use_listen_light
then:
- light.turn_on:
id: led
red: 100%
green: 89%
blue: 71%
brightness: 60%
effect: none
else:
- light.turn_off: led
switch:
- platform: template
name: Use wake word
id: use_wake_word
optimistic: true
restore_mode: RESTORE_DEFAULT_ON
entity_category: config
on_turn_on:
- lambda: id(va).set_use_wake_word(true);
- if:
condition:
not:
- voice_assistant.is_running
then:
- voice_assistant.start_continuous
- script.execute: reset_led
on_turn_off:
- voice_assistant.stop
- lambda: id(va).set_use_wake_word(false);
- script.execute: reset_led
- platform: template
name: Use listen light
id: use_listen_light
optimistic: true
restore_mode: RESTORE_DEFAULT_ON
entity_category: config
on_turn_on:
- script.execute: reset_led
on_turn_off:
- script.execute: reset_led
- platform: template
id: timer_ringing
optimistic: true
internal: true
restore_mode: ALWAYS_OFF
on_turn_on:
- delay: 15min
- switch.turn_off: timer_ringing
external_components:
- source: github://pr#5230
components:
- esp_adf
refresh: 0s
- source:
type: git
url: https://github.com/jesserockz/esphome-components
ref: main
components: [file]
refresh: 0s
esp_adf:
file:
- id: timer_finished_wave_file
file: https://github.com/esphome/firmware/raw/main/voice-assistant/sounds/timer_finished.wav