Add KiCad module carrier PCB draft
Introduce an editable KiCad 10 schematic and routed two-layer 82 × 80 mm layout with local provisional footprints, validation tooling, and component research. Keep the RS-232 male-module mapping and mechanical clearances explicitly provisional pending hardware verification.
This commit is contained in:
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,32 @@
|
||||
## Adafruit RS-232 Full Pinout Level-Shifter Breakout PCB
|
||||
|
||||
<a href="http://www.adafruit.com/products/5988"><img src="assets/5988.jpg?raw=true" width="500px"><br/>
|
||||
Click here to purchase one from the Adafruit shop</a>
|
||||
|
||||
PCB files for the Adafruit RS-232 Full Pinout Level-Shifter Breakout.
|
||||
|
||||
Format is EagleCAD schematic and board layout
|
||||
* https://www.adafruit.com/product/5988
|
||||
|
||||
### Description
|
||||
|
||||
If you want to interface with telco, retro, or industrial equipment, you'll probably run into RS-232 interfaces. The Adafruit RS232 Full-Pinout Breakout with 8 Channels of UART to RS-232 Level Shifters is your friend in such cases. It gives you 5 input and 3 output channels of level shifting and takes care of the high/negative voltage generation all in a low-cost breakout board. We use the trusty MAX3243 from TI, a classic chip part of the MAX232 lineage, so you know it will work great for all your RS-232 needs, up to 250Kbps.
|
||||
|
||||
RS-232 is what we had before USB: a 9- or 25-pin D-Sub connector that allowed data plus flow control lines. Many folks may remember these interfaces were used for mice, modems, barcode scanners, teletypes, and more. We still find devices sold with RS-232 ports, although many folks use a USB to RS-232 adapter these days.
|
||||
|
||||
If you want to use a microcontroller or microcomputer to chat with an RS-232, then thankfully, all you need is a serial port / UART (something just about any microcontroller has) and a level shifter. The level shifter is required because while most UARTs are 0-3.3V or 0-5V logic level, RS-232 requires +-6 to +-10V, yep the signal voltage goes negative! That means a specialized shifter is required to generate extra high and low voltages and safely convert the logic levels.
|
||||
|
||||
Sure you could buy a raw MAX232 chip and wire up the necessary capacitors, but this board does it all for you and even comes with a DE-9 connector for plugging in directly into your 'client' device. It can run on 3.3V power and logic, which many older chips can't do. It also can do all 8 data pins, so you can use all of the flow control signals like RTS, CTS, DTR, DSR, DCD and RI.
|
||||
|
||||
We also include two separate lines from the MAX3243: 'Valid' and 'Off'. The Valid line output will have logic level high when the chip detects signal voltages from the device its plugged into. So you can use it as a 'connection made' signal. There's also the Off pin, which when set to logic high by the microcontroller will tri-state all the pins for power reduction.
|
||||
|
||||
This breakout comes fully assembled with a UART side for low-voltage power/logic level, and a DE-9F RS-232 side for high-voltage signals. We also include some header so you can solder to a breadboard in a few minutes.
|
||||
|
||||
### License
|
||||
|
||||
Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from [Adafruit](https://www.adafruit.com)!
|
||||
|
||||
Designed by Limor Fried/Ladyada for Adafruit Industries.
|
||||
|
||||
Creative Commons Attribution/Share-Alike, all text above must be included in any redistribution.
|
||||
See license.txt for additional details.
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 340 KiB |
Binary file not shown.
@@ -0,0 +1,753 @@
|
||||
Tactile Switch B3F
|
||||
Through-hole-mounting Switches
|
||||
in a Wide Range of Models:
|
||||
6 × 6 mm, 12 × 12 mm, Side-operated
|
||||
Models, Gold-plated Contacts, and
|
||||
Radial Tape
|
||||
• Extended mechanical/electrical durability: 10 x 106
|
||||
operations for 12 x 12 mm type and 1 x 106
|
||||
operations for the 6 x 6 mm type
|
||||
• Taped radial type, vertical type and high force
|
||||
types are available.
|
||||
• Gold plated models available for increased
|
||||
contact reliability, resistance to corrosive gas and
|
||||
insulation failure prevention for ion migration in
|
||||
harsh environments
|
||||
• B32-series Key Tops mount to models with
|
||||
projected plungers.
|
||||
RoHS Compliant
|
||||
|
||||
■ List of Models
|
||||
|
||||
6 × 6 mm Models
|
||||
Type Contact Plunger Height Operating Plunger Bags
|
||||
material force (OF) color Without ground Minimum With ground Minimum
|
||||
terminal packing unit terminal packing unit
|
||||
Standard: Silver Flat type 4.3 mm 0.98 N {100 gf} lvory B3F-1000 B3F-1100
|
||||
B3F-1000 plated 1.47 N {150 gf} Yellow B3F-1002 B3F-1102
|
||||
Series
|
||||
2.55 N {260 gf} Orange B3F-1005 B3F-1105
|
||||
4.9 N {500 gf} Red B3F-1006 ---
|
||||
5.0 mm 0.98 N {100 gf} Black B3F-1020 B3F-1120
|
||||
1.47 N {150 gf} Gray B3F-1022 B3F-1122
|
||||
2.55 N {260 gf} Pink B3F-1025 B3F-1125
|
||||
4.9 N {500 gf} Blue B3F-1026 ---
|
||||
5.0 mm 0.98 N {100 gf} Black --- B3F-1110
|
||||
(7.5-mm pitch)
|
||||
7.0 mm 0.98 N {100 gf} Black B3F-1060 100 pcs --- 100 pcs
|
||||
1.47 N {150 gf} Yellow B3F-1062 ---
|
||||
9.5 mm 0.98 N {100 gf} Black B3F-1070 ---
|
||||
1.47 N {150 gf} Yellow B3F-1072 ---
|
||||
2.55 N {260 gf} Orange B3F-1075 ---
|
||||
7.3 mm 0.98 N {100 gf} lvory B3F-1050 B3F-1150
|
||||
Projected type
|
||||
1.47 N {150 gf} Yellow B3F-1052 B3F-1152
|
||||
|
||||
2.55 N {260 gf} Orange B3F-1055 B3F-1155
|
||||
|
||||
4.9 N {500 gf} Red B3F-1056 ---
|
||||
|
||||
|
||||
|
||||
|
||||
1
|
||||
B3F B3F
|
||||
|
||||
Type Contact Plunger Height Operating Plunger Bags
|
||||
material force (OF) color Without ground Minimum With ground Minimum
|
||||
terminal packing unit terminal packing unit
|
||||
Side- Silver 3.15 mm 0.98 N {100 gf} lvory --- B3F-3100
|
||||
Flat type
|
||||
operated: plated 1.47 N {150 gf} Yellow --- B3F-3102
|
||||
B3F-3000
|
||||
Series 2.55 N {260 gf} Orange --- B3F-3105
|
||||
3.85 mm 0.98 N {100 gf} Black --- B3F-3120
|
||||
1.47 N {150 gf} Gray --- B3F-3122
|
||||
2.55 N {260 gf} Pink --- B3F-3125
|
||||
Projected type 6.15 mm 0.98 N {100 gf} lvory --- B3F-3150
|
||||
|
||||
1.47 N {150 gf} Yellow --- B3F-3152
|
||||
|
||||
2.55 N {260 gf} Orange --- B3F-3155
|
||||
|
||||
High- Gold 4.3 mm 1.76 N {180 gf} Yellow B3F-1002-G B3F-1102-G
|
||||
Flat type
|
||||
reliability plated
|
||||
gold-plated: 5.0 mm Gray B3F-1022-G B3F-1122-G
|
||||
B3F-1000-G 7.0 mm Yellow B3F-1062-G 100 pcs --- 100 pcs
|
||||
Series (see note)
|
||||
9.5 mm Yellow B3F-1072-G ---
|
||||
(see note)
|
||||
Side- Projected type 7.3 mm Yellow B3F-1052-G ---
|
||||
operated
|
||||
with highly
|
||||
reliable
|
||||
gold-plated:
|
||||
B3F-3000-G
|
||||
Series
|
||||
3.85 mm Gray --- B3F-3122-G
|
||||
Flat type
|
||||
(see note)
|
||||
|
||||
|
||||
|
||||
|
||||
Note: Bulk Packaged, 100 Switches per bag. Order in multiples of the package quantity.
|
||||
12 × 12 mm Models
|
||||
Type Contact Plunger Height Operating Plunger Bags
|
||||
material (or LED color) force (OF) color Without ground Minimum With ground Minimum
|
||||
terminal packing unit terminal packing unit
|
||||
Standard: Silver Flat type 4.3 mm 1.27 N {130 gf} lvory B3F-4000 B3F-4100
|
||||
B3F-4000 plated 2.55 N {260 gf} Yellow B3F-4005 B3F-4105
|
||||
Series
|
||||
Projected type 7.3 mm 1.27 N {130 gf} lvory B3F-4050 B3F-4150
|
||||
2.55 N {260 gf} Yellow B3F-4055 B3F-4155
|
||||
Long durability: Silver Flat type 4.3 mm 1.27 N {130 gf} Blue B3F-5000 B3F-5100
|
||||
100 pcs 100 pcs
|
||||
B3F-5000 Se- plated
|
||||
ries Projected type 7.3 mm Blue B3F-5050 B3F-5150
|
||||
High reliability Gold Flat type 4.3 mm 1.27 N {130 gf} Blue B3F-5001 B3F-5101
|
||||
gold-plated: plated
|
||||
B3F-5001 Projected type 7.3 mm Blue B3F-5051 B3F-5151
|
||||
Series
|
||||
Note: Bulk Packaged, 100 switches per bag. Order in multiples of the package quantity.
|
||||
6 × 6 mm Radial Models (Taping Specifications)
|
||||
Type Contact Plunger Height Operating Plunger Taped Radial
|
||||
material force (OF) color Without ground Minimum With ground Minimum
|
||||
terminal packing unit terminal packing unit
|
||||
Taped Silver Flat type 4.3 mm 0.98 N {100 gf} lvory B3F-6000 B3F-6100
|
||||
Radial: plated 1.47 N {150 gf} Yellow B3F-6002 B3F-6102
|
||||
B3F-6000
|
||||
Series 5.0 mm 0.98 N {100 gf} Black B3F-6020 B3F-6120
|
||||
1,000 pcs 1,000 pcs
|
||||
1.47 N {150 gf} Gray B3F-6022 B3F-6122
|
||||
Projected type 7.3 mm 0.98 N {100 gf} lvory B3F-6050 B3F-6150
|
||||
1.47 N {150 gf} Yellow B3F-6052 B3F-6152
|
||||
Note: The switches are tape packaged in units of 1,000 per package. Order in multiples of the package size. Switches are not sold individually.
|
||||
|
||||
|
||||
|
||||
|
||||
2
|
||||
B3F B3F
|
||||
|
||||
■ Ratings/Characteristics
|
||||
|
||||
Rating (resistive load) 1 to 50 mA, 3 to 24 VDC (B3F-G: 100 μA to 50 mA, 3 to 24 VDC)
|
||||
Minimum applicable load (reference value) 10 μA at 1 VDC (resistive load)
|
||||
Ambient operating temperature -25°C to +70°C at 60%RH max. (with no icing or condensation)
|
||||
Ambient operating humidity 35% to 85% (at +5 to +35°C)
|
||||
Contact form SPST-NO
|
||||
Contact resistance (initial value) 100 mΩ max.
|
||||
Insulation resistance 100 MΩ min. (at 250 VDC with insulation tester)
|
||||
Dielectric strength 500 VAC, 50/60 Hz for 1 min
|
||||
Bounce time 5 ms max.
|
||||
Vibration resistance Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
|
||||
Shock resistance Destruction: 1,000 m/s2 {approx. 100G} max.
|
||||
Malfunction: 100 m/s2 {approx. 10G} max.
|
||||
Durability B3F-1000, B3F-3000, B3F-6000:
|
||||
1,000,000 operations min (OF: 0.98 N {100 gf}) (B3F-1070: 500,000 operations min)
|
||||
300,000 operations min (OF: 1.47 N {150 gf})
|
||||
100,000 operations min (OF: 2.55 N {260 gf})
|
||||
50,000 operations min (OF: 4.9 N {500 gf})
|
||||
B3F-4000:
|
||||
3,000,000 operations min (OF: 1.27 N {130 gf})
|
||||
1,000,000 operations min (OF: 2.55 N {260 gf})
|
||||
B3F-5000/5001:
|
||||
10,000,000 operations min.
|
||||
B3F-G:
|
||||
300,000 operations min.
|
||||
Weight 6 × 6 mm models: approx. 0.25 g
|
||||
12 × 12 mm models (standard types): approx. 0.85 g
|
||||
Radial models: approx. 0.25 g
|
||||
Degree of protection IEC IP00
|
||||
Washing Not possible
|
||||
|
||||
|
||||
■ Operating Characteristics
|
||||
|
||||
6 × 6 mm Models
|
||||
B3F-1000, B3F-3000, B3F-6000 B3F-G
|
||||
Operating force (OF) 0.98 N 1.47 N 2.55 N 4.9 N 1.76 N
|
||||
B3F-1@@0 B3F-1@@2 B3F-1@@5 B3F-10@6 B3F-1@@2-G
|
||||
Item B3F-3@@0 B3F-3@@2 B3F-3@@5 B3F-3@@2-G
|
||||
B3F-6@@0 B3F-6@@2
|
||||
Operating force (OF) 0.98±0.29 N 1.47±0.49 N 2.55±0.69 N 4.9±1.47 N 1.76±0.49 N
|
||||
{100±30 gf} {150±50 gf} {260±70 gf} {500±150 gf} {180±50 gf}
|
||||
Releasing force (RF) 0.2 N {20 gf} min. 0.49 N {50 gf}min. 0.49 N {50 gf}min. 0.7 N {70 gf} min. 0.49 N {50 gf}min.
|
||||
Pretravel (PT) 0.25+0.2/–0.1 mm 0.25+0.2/–0.1 mm
|
||||
|
||||
|
||||
12 × 12 mm Models
|
||||
B3F-4000, B3F-5000, B3F-5001
|
||||
Operating force (OF) 1.27 N 2.55 N
|
||||
B3F-4@@0 B3F-4@@5
|
||||
Item B3F-5@@0
|
||||
B3F-5@@1
|
||||
Operating force (OF) 1.27±0.49 N 2.55±0.69 N
|
||||
{130±50 gf} {260±70 gf}
|
||||
Releasing force (RF) 0.29 N {30 gf} min. 0.49 N {50 gf} min.
|
||||
Pretravel (PT) 0.3+0.2/–0.1 mm
|
||||
|
||||
|
||||
|
||||
|
||||
3
|
||||
B3F B3F
|
||||
|
||||
■ Dimensions (Unit: mm)
|
||||
Note: The numbers used for terminals in the following graphics are indicated in the “Bottom View” diagram below. In this 2 1
|
||||
diagram, the Switch is rotated so that the terminals are on the right and left-hand sides, and the OMRON logo ap- 4 3
|
||||
pears the right way up. (Except Side-operated and Radial Models) (Bottom View)
|
||||
|
||||
6 × 6 mm Models
|
||||
|
||||
Standard, Flat Plunger Type Standard, Flat Plunger Type
|
||||
(without Ground Terminal) (with Ground Terminal)
|
||||
B3F-1000, B3F-1002, B3F-1005, B3F-1006 B3F-1100, B3F-1102, B3F-1105
|
||||
B3F-1020 (See note.), B3F-1022 (See note.), B3F-1120 (See note.), B3F-1122 (See note.)
|
||||
B3F-1025 (See note.), B3F-1026 (See note.) B3F-1125 (See note.)
|
||||
B3F-1002-G, B3F-1022-G (See note.) B3F-1102-G, B3F-1122-G (See note.)
|
||||
PCB Processing Dimensions PCB Processing Dimensions
|
||||
(Reference Only) (Top View) (Reference Only) (Top View)
|
||||
6±0.2 (PCB thickness, t=1.6) 6±0.2 (PCB thickness, t=1.6)
|
||||
|
||||
|
||||
6±0.2 4.5±0.2 6±0.2 4.5±0.2
|
||||
4.5±0.1 4.5±0.1
|
||||
|
||||
4.1±0.1
|
||||
1.5 3.5
|
||||
6.5±0.1 Four, 1±0.1 dia. dia. Five, 1±0.05 dia.
|
||||
3.5
|
||||
dia. (See note.) 6.5±0.1
|
||||
4.3±0.2 3.4
|
||||
(See note.) Terminal Arrangement/ Terminal Arrangement/Internal
|
||||
4.3±0.2 3.4 Internal Connections (Top View) Connections (Top View)
|
||||
3.5
|
||||
4 3 0.3
|
||||
3.5 4 3
|
||||
0.3 0.7
|
||||
0.7 0.7
|
||||
6.5±0.5 6.5±0.5
|
||||
0.3
|
||||
7.7±0.5 0.7 0.7 2 1 7.7±0.5 2 1
|
||||
Note: The height of B3F-1120, B3F-1122, and 5
|
||||
Note: The height of B3F-1020, B3F-1022, B3F-1025,
|
||||
and B3F-1026 is 5±0.2 mm. B3F-1125 is 5±0.2 mm.
|
||||
|
||||
|
||||
|
||||
Standard, Flat Plunger Type Standard, Flat Plunger Type
|
||||
(with Ground Terminal, Pitch: 7.5 mm) (without Ground Terminal)
|
||||
B3F-1110 B3F-1060, B3F-1062, B3F-1062-G
|
||||
PCB Processing Dimensions PCB Processing Dimensions
|
||||
(Reference Only) (Top View) (Reference Only) (Top View)
|
||||
(PCB thickness, t=1.6) (PCB thickness, t=1.6)
|
||||
6±0.2
|
||||
6±0.2
|
||||
|
||||
6±0.2 4.5±0.1
|
||||
4.5±0.2 4.5±0.1
|
||||
6±0.2 4.5±0.2
|
||||
4.1±0.1
|
||||
|
||||
Four, 3.5
|
||||
1.5 1.2±0.05 dia. dia.
|
||||
1±0.05 dia. 6.5±0.1
|
||||
Four,
|
||||
3.5 7.5±0.1 0.5 max. 1±0.05 dia.
|
||||
dia.
|
||||
7±0.2
|
||||
Terminal Arrangement/Internal 3.4
|
||||
5±0.2
|
||||
3.4
|
||||
Connections (Top View) Terminal Arrangement/
|
||||
(1.8)
|
||||
3.5
|
||||
4 3 0.3
|
||||
Internal Connections
|
||||
3.5 (Top View)
|
||||
0.3 6.5±0.5
|
||||
7.7±0.5 0.7 0.7
|
||||
4 3
|
||||
0.7 0.7 0.7 2 1
|
||||
7.5±0.5
|
||||
0.3 5
|
||||
9±0.5
|
||||
2 1
|
||||
|
||||
|
||||
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. No terminal numbers are indicated on the Switches.
|
||||
|
||||
|
||||
|
||||
|
||||
4
|
||||
B3F B3F
|
||||
|
||||
|
||||
Standard, Flat Plunger Type Standard, Projected Plunger Type
|
||||
(without Ground Terminal) (without Ground Terminal)
|
||||
B3F-1070, B3F-1072, B3F-1075, B3F-1072-G B3F-1050, B3F-1052
|
||||
B3F-1055, B3F-1056
|
||||
PCB Processing Dimensions B3F-1052-G PCB Processing Dimensions
|
||||
(Reference Only) (Top View) (Reference Only) (Top View)
|
||||
(PCB thickness, t=1.6) (PCB thickness, t=1.6)
|
||||
6±0.2 6±0.2
|
||||
|
||||
|
||||
6±0.2 4.5±0.2 4.5±0.1 6±0.2 4.5±0.2 4.5±0.2
|
||||
|
||||
|
||||
3.5
|
||||
dia. 6.5±0.1 Four,
|
||||
3 6.5±0.1 Four, 2.4 × 2.4±0.1 3.5 dia. 1±0.05 dia.
|
||||
dia. 1±0.05 .dia
|
||||
|
||||
0.5 max. Terminal Arrangement/Internal 1.8±0.1 Terminal Arrangement/Internal
|
||||
9.5 Connections (Top View) Connections (Top View)
|
||||
7.3±0.2
|
||||
3.4 4.3±0.2 3.4
|
||||
4 3 4 3
|
||||
(1.8)
|
||||
3.5 3.5
|
||||
0.3 0.3
|
||||
6.5±0.5 2 1 6.5±0.5 2 1
|
||||
7.7±0.5 0.7 0.7 0.7 0.7
|
||||
7.7±0.5
|
||||
|
||||
|
||||
|
||||
Standard, Projected Plunger Type Side-operated, Flat Plunger Type
|
||||
(with Ground Terminal) B3F-3100, B3F-3102, B3F-3105
|
||||
B3F-1150, B3F-1152, B3F-1155
|
||||
|
||||
PCB Processing Dimensions PCB Processing Dimensions
|
||||
(Reference Only) (Top View) (Reference Only) (Top View)
|
||||
(PCB thickness, t=1.6) 7.3 (PCB thickness, t=1.6)
|
||||
6±0.2
|
||||
Two, 1.5 ±0.05 dia.
|
||||
6.25
|
||||
6±0.2 4.5±0.2 4.5±0.1
|
||||
2.5±0.1
|
||||
4.1±0.1
|
||||
3.5 dia.
|
||||
1.5 Five, 1 ±0.05 dia. 4.5±0.1
|
||||
2.4 × 2.4±0.1 3.5 dia. 7±0.1 Two,
|
||||
6.5±0.1 1±0.05 dia.
|
||||
7.4
|
||||
1.8±0.1 Terminal Arrangement/ Terminal Arrangement/
|
||||
4
|
||||
7.3±0.2 Internal Connections Internal Connections
|
||||
4.3±0.2 3.4 (Top View) (Top View)
|
||||
3.5
|
||||
4 3 4
|
||||
3.5 0.3 3
|
||||
0.7 0.3 1
|
||||
0.3 4.5±0.5 1 2
|
||||
2 1 2.25
|
||||
0.7 0.7 0.7 7±0.5 2.5±0.5
|
||||
6.5±0.5 5 3.15±0.2
|
||||
0.3 8.7
|
||||
7.7±0.5
|
||||
|
||||
|
||||
|
||||
Side-operated, Flat Plunger Type (Height: 3.85 mm) Side-operated, Projected Plunger Type
|
||||
B3F-3120, B3F-3122, B3F-3125, B3F-3122-G B3F-3150, B3F-3152, B3F-3155
|
||||
PCB Processing Dimensions PCB Processing Dimensions
|
||||
7.3 7.3 (Reference Only) (Top View)
|
||||
(Reference Only) (Top View)
|
||||
(PCB thickness, t=1.6) (PCB thickness, t=1.6)
|
||||
Two, 1.5 ±0.05 dia. 6.25 Two, 1.5 ±0.05 dia.
|
||||
6.25
|
||||
|
||||
|
||||
2.5±0.1 2.5±0.1
|
||||
|
||||
3.5 dia.
|
||||
4.5±0.1 4.5±0.1
|
||||
3.5 dia.
|
||||
7±0.1 Two, 7±0.1 Two,
|
||||
1±0.05 dia. 1±0.05 dia.
|
||||
7.4 Terminal Arrangement/ 7.4 2.4 × 2.4±0.1 Terminal Arrangement/
|
||||
4 Internal Connections Internal Connections
|
||||
4
|
||||
(Top View) (Top View)
|
||||
3.5
|
||||
4 3.5 4
|
||||
3 3
|
||||
0.3
|
||||
0.7 0.3 1 0.3
|
||||
4.5±0.5 1 2 0.7 0.3 1 1 2
|
||||
4.5±0.5 1.8±0.1
|
||||
2.25
|
||||
7±0.5 2.5±0.5 2.25
|
||||
3.85±0.2 7±0.5 2.5±0.5
|
||||
8.7 6.15±0.2
|
||||
8.7
|
||||
|
||||
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. No terminal numbers are indicated on the Switches.
|
||||
|
||||
|
||||
|
||||
|
||||
5
|
||||
B3F B3F
|
||||
|
||||
12 × 12 mm Models
|
||||
Standard, Long-durability, Standard, Long-durability,
|
||||
and High-reliability Models and High-reliability Models
|
||||
Flat Plunger Type Flat Plunger Type
|
||||
(without Ground Terminal) (with Ground Terminal)
|
||||
B3F-4000, B3F-4005, B3F-4100, B3F-4105,
|
||||
B3F-5000, B3F-5001 B3F-5100, B3F-5101
|
||||
PCB Processing Dimensions PCB Processing Dimensions
|
||||
(Reference Only) (Top View) (Reference Only) (Top View)
|
||||
(PCB thickness, t=1.6) (PCB thickness, t=1.6)
|
||||
Two, 1.8±0.05 dia.
|
||||
Two, 1.8±0.05 dia. (for positioning boss)
|
||||
12±0.2 (for positioning boss) 12±0.2
|
||||
|
||||
|
||||
5±0.1 9±0.1
|
||||
5±0.1 9±0.1
|
||||
12±0.2 5±0.2 12±0.2 5±0.2
|
||||
6.9±0.1
|
||||
|
||||
Five,
|
||||
Four, 1.2±0.05 dia.
|
||||
12.5±0.1 1.2±0.05 dia.
|
||||
1.6 12.5±0.1
|
||||
|
||||
|
||||
7.1 dia.
|
||||
Terminal Arrangement/ Terminal Arrangement/
|
||||
7.1 dia.
|
||||
Internal Connections Internal Connections
|
||||
4.3±0.2
|
||||
(Top View) (Top View)
|
||||
3.5 4.3±0.2 3.5
|
||||
3.5 4 3 4 3
|
||||
3.5
|
||||
1.6 dia. 1.6 dia.
|
||||
0.3 1 1 0.9 0.3 1 1
|
||||
12.5±0.5 9±0.1 2 1 12.5±0.5 6.9 2 1
|
||||
13.8±0.5 13.8±0.5 9±0.1 5
|
||||
|
||||
|
||||
|
||||
|
||||
Standard, Long-durability, Standard, Long-durability,
|
||||
and High-reliability Models and High-reliability Models
|
||||
Projected Plunger Type Projected Plunger Type
|
||||
(without Ground Terminal) (with Ground Terminal)
|
||||
B3F-4050, B3F-4055, B3F-4150, B3F-4155,
|
||||
B3F-5050, B3F-5051 PCB Processing Dimensions B3F-5150, B3F-5151 PCB Processing Dimensions
|
||||
(Reference Only) (Top View) (Reference Only) (Top View)
|
||||
(PCB thickness, t=1.6) (PCB thickness, t=1.6)
|
||||
12±0.2 Two, 1.8±0.05 dia.
|
||||
Two, 1.8±0.05 dia.
|
||||
(for positioning boss) (for positioning boss)
|
||||
12±0.2
|
||||
|
||||
12±0.2 5±0.2
|
||||
5±0.1 9±0.1
|
||||
5±0.1 9±0.1
|
||||
12±0.2 5±0.2
|
||||
6.9±0.1
|
||||
|
||||
1.6 Five,
|
||||
Four, 1.2±0.05 dia.
|
||||
12.5±0.1 1.2±0.05 dia.
|
||||
@3.8±0.1 12.5±0.1
|
||||
@3.8±0.1
|
||||
7.1 dia. 7.1 dia.
|
||||
|
||||
Terminal Arrangement/ 1.8±0.2 Terminal Arrangement/
|
||||
1.8±0.2
|
||||
Internal Connections 7.3±0.2 Internal Connections
|
||||
7.3±0.2
|
||||
4.3±0.2 3.5 (Top View) 4.3±0.2 3.5 (Top View)
|
||||
3.5 4 3 3.5 4 3
|
||||
|
||||
1.6 dia. 1.6 dia.
|
||||
0.3 1 1 0.9 0.3 1 1
|
||||
12.5±0.5 9±0.1 2 1 12.5±0.5 6.9 2 1
|
||||
13.8±0.5 13.8±0.5 9±0.1
|
||||
5
|
||||
|
||||
|
||||
|
||||
|
||||
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
|
||||
|
||||
|
||||
|
||||
|
||||
6
|
||||
B3F B3F
|
||||
|
||||
Note: The numbers used for terminals in the following graphics are indicated in the “Bottom View” diagram below. In this 1
|
||||
diagram, the Switch is rotated so that the terminals are on the right and left-hand sides, and the OMRON logo appears
|
||||
the right way up.
|
||||
2
|
||||
6 mm × 6 mm Radial Types (Taping Specifications): Sold in Units of 1,000 Switches
|
||||
(Bottom View)
|
||||
|
||||
|
||||
Flat Plunger Type 6±0.3 Surface B
|
||||
(without Ground Terminal)
|
||||
B3F-6000, B3F-6002 6±0.3
|
||||
12.7±1
|
||||
6.35±1
|
||||
2 max.
|
||||
3.5 dia. Surface A
|
||||
|
||||
0.5 max.
|
||||
Support
|
||||
0.9 tape 9
|
||||
(1) 4.3 0.5 max. +1
|
||||
3.4 180
|
||||
|
||||
6
|
||||
0.2 max. 9±0.5
|
||||
0.5
|
||||
+1
|
||||
5-0.2
|
||||
+0.8 0.3 18-0.5
|
||||
|
||||
4 dia. ±0.2
|
||||
Terminal Arrangement
|
||||
PCB Processing Dimensions /Internal Connections
|
||||
12.7±0.3 Carrier tape
|
||||
(Reference Only) (Top View) (Top View)
|
||||
Note: The tape is random
|
||||
(PCB thickness, t=1.6)
|
||||
between surface A
|
||||
and surface B.
|
||||
+0.1 2 1
|
||||
Two, 1 0 dia. 5±0.1
|
||||
|
||||
|
||||
|
||||
|
||||
Flat Plunger Type 6±0.3 12.7±1
|
||||
6.35±1
|
||||
(with Ground Terminal) 2 max.
|
||||
B3F-6100, B3F-6102 6±0.3 2
|
||||
|
||||
|
||||
3.5 dia.
|
||||
Support 11
|
||||
0.5 max. tape 0.5 max.
|
||||
20±0.5
|
||||
0.9
|
||||
(1) 4.3 3.4
|
||||
6
|
||||
9±0.5
|
||||
3.1
|
||||
+1
|
||||
0.2 dia. 18-0.5
|
||||
0.5 5±0.2 0.3
|
||||
+0.8 4±0.2 dia.
|
||||
5-0.2 0.6
|
||||
|
||||
|
||||
12.7±0.3 Carrier tape
|
||||
PCB Processing Dimensions Terminal Arrangement
|
||||
(Reference Only) (Top View) /Internal Connections
|
||||
(PCB thickness, t=1.6) (Top View)
|
||||
|
||||
|
||||
|
||||
+0.1 2 1
|
||||
Three, 1 0 dia. 5±0.1 3
|
||||
5±0.1
|
||||
|
||||
|
||||
|
||||
Flat Plunger Type 6±0.3 Surface B
|
||||
(without Ground Terminal) 12.7±1
|
||||
B3F-6020, B3F-6022 6.35±1
|
||||
2 max.
|
||||
6±0.3
|
||||
|
||||
|
||||
3.5 dia. Surface A
|
||||
Support 9
|
||||
0.5 max. tape 0.5 max. +1
|
||||
180
|
||||
0.9
|
||||
(1) 5
|
||||
3.4 6
|
||||
9±0.5
|
||||
+1
|
||||
0.2 max. 18-0.5
|
||||
0.5
|
||||
+0.8
|
||||
5-0.2 0.3 4±0.2 dia.
|
||||
|
||||
Terminal Arrangement Carrier tape
|
||||
Note: The tape is random PCB Processing Dimensions /Internal Connections
|
||||
12.7±0.3
|
||||
|
||||
between surface A (Reference Only) (Top View) (Top View)
|
||||
and surface B. (PCB thickness, t=1.6)
|
||||
|
||||
|
||||
+0.1 2 1
|
||||
Two, 1 0 dia. 5±0.1
|
||||
|
||||
|
||||
|
||||
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. No terminal numbers are indicated on the Switches.
|
||||
|
||||
|
||||
|
||||
7
|
||||
B3F B3F
|
||||
|
||||
|
||||
Flat Plunger Type 6±0.3
|
||||
(with Ground Terminal)
|
||||
B3F-6120, B3F-6122 6±0.3 2
|
||||
12.7±1
|
||||
6.35±1
|
||||
2 max.
|
||||
|
||||
3.5 dia.
|
||||
0.5 max.
|
||||
|
||||
0.9 Support 11
|
||||
(1) 5
|
||||
3.4 tape 0.5 max.
|
||||
20±0.5
|
||||
3.1
|
||||
0.2 max. 6
|
||||
9±0.5
|
||||
0.5 5±0.2 0.3
|
||||
+1
|
||||
+0.8
|
||||
5-0.2 0.6 18-0.5
|
||||
|
||||
4±0.2 dia.
|
||||
PCB Processing Dimensions Terminal Arrangement
|
||||
(Reference Only) (Top View) /Internal Connections Carrier tape
|
||||
12.7±0.3
|
||||
(PCB thickness, t=1.6) (Top View)
|
||||
|
||||
|
||||
+0.1 2 1
|
||||
Three, 1 0 dia. 5±0.1 3
|
||||
5±0.1
|
||||
|
||||
|
||||
|
||||
|
||||
Projected Plunger Type 6±0.3 Surface B
|
||||
(without Ground Terminal)
|
||||
B3F-6050, B3F-6052
|
||||
6±0.3
|
||||
|
||||
12.7±1
|
||||
3.5 dia. Surface A 6.35±1
|
||||
2.4 2 max.
|
||||
|
||||
|
||||
0.5 max.
|
||||
7.3 0.9
|
||||
(1) 3.4
|
||||
Support 9
|
||||
tape 0.5 dia. +1
|
||||
18 0
|
||||
0.2 max.
|
||||
0.5
|
||||
+0.8 0.3 6
|
||||
5-0.2 9±0.5
|
||||
+1
|
||||
18-0.5
|
||||
PCB Processing Dimensions Terminal Arrang ement
|
||||
(Reference Only) (Top View) /Internal Connections 4±0.2 dia.
|
||||
(PCB thickness, t=1.6) (Top View)
|
||||
12.7±0.3 Carrier tape
|
||||
+0.1
|
||||
Two, 1 0 dia. 5±0.1 2 1
|
||||
|
||||
|
||||
Note: The tape is random between surface A
|
||||
and surface B.
|
||||
|
||||
|
||||
Projected Plunger Type 6±0.3
|
||||
(with Ground Terminal)
|
||||
B3F-6150, B3F-6152
|
||||
6±0.3 2 12.7±1
|
||||
6.35±1
|
||||
2 max.
|
||||
|
||||
3.5 dia. 2.4
|
||||
|
||||
|
||||
0.5 max.
|
||||
7.3 0.9
|
||||
(1) 3.4 Support 11
|
||||
tape 0.5 max.
|
||||
20±0.5
|
||||
3.1
|
||||
0.2 max.
|
||||
6
|
||||
9±0.5
|
||||
0.5 5±0.2 0.3
|
||||
+0.8 +1
|
||||
5 -0.2 0.6 18-0.5
|
||||
|
||||
|
||||
Terminal Arrangement 4±0.2 dia.
|
||||
PCB Processing Dimensions
|
||||
(Reference Only) (Top View) /Internal Connections
|
||||
(PCB thickness, t=1.6) (Top View) 12.7±0.3 Carrier tape
|
||||
|
||||
|
||||
|
||||
+0.1
|
||||
Three, 1 0 dia. 5±0.1 2 1
|
||||
3
|
||||
5±0.1
|
||||
|
||||
|
||||
|
||||
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. No terminal numbers are indicated on the Switches.
|
||||
|
||||
|
||||
|
||||
8
|
||||
B3F B3F
|
||||
|
||||
■ Key Tops
|
||||
B32-series Key Tops are available for projected plungers. Refer to the Datasheet of B32 for details.
|
||||
|
||||
■ Precautions
|
||||
Be sure to read the safety precautions common to all Tactile Switches for correct use.
|
||||
|
||||
|
||||
|
||||
|
||||
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
|
||||
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
|
||||
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
|
||||
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
|
||||
equipment, and be sure to provide the system or equipment with double safety mechanisms.
|
||||
|
||||
|
||||
Note: Do not use this document to operate the Unit.
|
||||
|
||||
OMRON Corporation
|
||||
Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. A070-E1-08
|
||||
1014(0207)(O)
|
||||
|
||||
|
||||
|
||||
9
|
||||
|
||||
@@ -0,0 +1,359 @@
|
||||
Creative Commons Legal Code
|
||||
|
||||
Attribution-ShareAlike 3.0 Unported
|
||||
|
||||
CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE
|
||||
LEGAL SERVICES. DISTRIBUTION OF THIS LICENSE DOES NOT CREATE AN
|
||||
ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS
|
||||
INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
|
||||
REGARDING THE INFORMATION PROVIDED, AND DISCLAIMS LIABILITY FOR
|
||||
DAMAGES RESULTING FROM ITS USE.
|
||||
|
||||
License
|
||||
|
||||
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CREATIVE
|
||||
COMMONS PUBLIC LICENSE ("CCPL" OR "LICENSE"). THE WORK IS PROTECTED BY
|
||||
COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS
|
||||
AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED.
|
||||
|
||||
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU ACCEPT AND AGREE
|
||||
TO BE BOUND BY THE TERMS OF THIS LICENSE. TO THE EXTENT THIS LICENSE MAY
|
||||
BE CONSIDERED TO BE A CONTRACT, THE LICENSOR GRANTS YOU THE RIGHTS
|
||||
CONTAINED HERE IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND
|
||||
CONDITIONS.
|
||||
|
||||
1. Definitions
|
||||
|
||||
a. "Adaptation" means a work based upon the Work, or upon the Work and
|
||||
other pre-existing works, such as a translation, adaptation,
|
||||
derivative work, arrangement of music or other alterations of a
|
||||
literary or artistic work, or phonogram or performance and includes
|
||||
cinematographic adaptations or any other form in which the Work may be
|
||||
recast, transformed, or adapted including in any form recognizably
|
||||
derived from the original, except that a work that constitutes a
|
||||
Collection will not be considered an Adaptation for the purpose of
|
||||
this License. For the avoidance of doubt, where the Work is a musical
|
||||
work, performance or phonogram, the synchronization of the Work in
|
||||
timed-relation with a moving image ("synching") will be considered an
|
||||
Adaptation for the purpose of this License.
|
||||
b. "Collection" means a collection of literary or artistic works, such as
|
||||
encyclopedias and anthologies, or performances, phonograms or
|
||||
broadcasts, or other works or subject matter other than works listed
|
||||
in Section 1(f) below, which, by reason of the selection and
|
||||
arrangement of their contents, constitute intellectual creations, in
|
||||
which the Work is included in its entirety in unmodified form along
|
||||
with one or more other contributions, each constituting separate and
|
||||
independent works in themselves, which together are assembled into a
|
||||
collective whole. A work that constitutes a Collection will not be
|
||||
considered an Adaptation (as defined below) for the purposes of this
|
||||
License.
|
||||
c. "Creative Commons Compatible License" means a license that is listed
|
||||
at https://creativecommons.org/compatiblelicenses that has been
|
||||
approved by Creative Commons as being essentially equivalent to this
|
||||
License, including, at a minimum, because that license: (i) contains
|
||||
terms that have the same purpose, meaning and effect as the License
|
||||
Elements of this License; and, (ii) explicitly permits the relicensing
|
||||
of adaptations of works made available under that license under this
|
||||
License or a Creative Commons jurisdiction license with the same
|
||||
License Elements as this License.
|
||||
d. "Distribute" means to make available to the public the original and
|
||||
copies of the Work or Adaptation, as appropriate, through sale or
|
||||
other transfer of ownership.
|
||||
e. "License Elements" means the following high-level license attributes
|
||||
as selected by Licensor and indicated in the title of this License:
|
||||
Attribution, ShareAlike.
|
||||
f. "Licensor" means the individual, individuals, entity or entities that
|
||||
offer(s) the Work under the terms of this License.
|
||||
g. "Original Author" means, in the case of a literary or artistic work,
|
||||
the individual, individuals, entity or entities who created the Work
|
||||
or if no individual or entity can be identified, the publisher; and in
|
||||
addition (i) in the case of a performance the actors, singers,
|
||||
musicians, dancers, and other persons who act, sing, deliver, declaim,
|
||||
play in, interpret or otherwise perform literary or artistic works or
|
||||
expressions of folklore; (ii) in the case of a phonogram the producer
|
||||
being the person or legal entity who first fixes the sounds of a
|
||||
performance or other sounds; and, (iii) in the case of broadcasts, the
|
||||
organization that transmits the broadcast.
|
||||
h. "Work" means the literary and/or artistic work offered under the terms
|
||||
of this License including without limitation any production in the
|
||||
literary, scientific and artistic domain, whatever may be the mode or
|
||||
form of its expression including digital form, such as a book,
|
||||
pamphlet and other writing; a lecture, address, sermon or other work
|
||||
of the same nature; a dramatic or dramatico-musical work; a
|
||||
choreographic work or entertainment in dumb show; a musical
|
||||
composition with or without words; a cinematographic work to which are
|
||||
assimilated works expressed by a process analogous to cinematography;
|
||||
a work of drawing, painting, architecture, sculpture, engraving or
|
||||
lithography; a photographic work to which are assimilated works
|
||||
expressed by a process analogous to photography; a work of applied
|
||||
art; an illustration, map, plan, sketch or three-dimensional work
|
||||
relative to geography, topography, architecture or science; a
|
||||
performance; a broadcast; a phonogram; a compilation of data to the
|
||||
extent it is protected as a copyrightable work; or a work performed by
|
||||
a variety or circus performer to the extent it is not otherwise
|
||||
considered a literary or artistic work.
|
||||
i. "You" means an individual or entity exercising rights under this
|
||||
License who has not previously violated the terms of this License with
|
||||
respect to the Work, or who has received express permission from the
|
||||
Licensor to exercise rights under this License despite a previous
|
||||
violation.
|
||||
j. "Publicly Perform" means to perform public recitations of the Work and
|
||||
to communicate to the public those public recitations, by any means or
|
||||
process, including by wire or wireless means or public digital
|
||||
performances; to make available to the public Works in such a way that
|
||||
members of the public may access these Works from a place and at a
|
||||
place individually chosen by them; to perform the Work to the public
|
||||
by any means or process and the communication to the public of the
|
||||
performances of the Work, including by public digital performance; to
|
||||
broadcast and rebroadcast the Work by any means including signs,
|
||||
sounds or images.
|
||||
k. "Reproduce" means to make copies of the Work by any means including
|
||||
without limitation by sound or visual recordings and the right of
|
||||
fixation and reproducing fixations of the Work, including storage of a
|
||||
protected performance or phonogram in digital form or other electronic
|
||||
medium.
|
||||
|
||||
2. Fair Dealing Rights. Nothing in this License is intended to reduce,
|
||||
limit, or restrict any uses free from copyright or rights arising from
|
||||
limitations or exceptions that are provided for in connection with the
|
||||
copyright protection under copyright law or other applicable laws.
|
||||
|
||||
3. License Grant. Subject to the terms and conditions of this License,
|
||||
Licensor hereby grants You a worldwide, royalty-free, non-exclusive,
|
||||
perpetual (for the duration of the applicable copyright) license to
|
||||
exercise the rights in the Work as stated below:
|
||||
|
||||
a. to Reproduce the Work, to incorporate the Work into one or more
|
||||
Collections, and to Reproduce the Work as incorporated in the
|
||||
Collections;
|
||||
b. to create and Reproduce Adaptations provided that any such Adaptation,
|
||||
including any translation in any medium, takes reasonable steps to
|
||||
clearly label, demarcate or otherwise identify that changes were made
|
||||
to the original Work. For example, a translation could be marked "The
|
||||
original work was translated from English to Spanish," or a
|
||||
modification could indicate "The original work has been modified.";
|
||||
c. to Distribute and Publicly Perform the Work including as incorporated
|
||||
in Collections; and,
|
||||
d. to Distribute and Publicly Perform Adaptations.
|
||||
e. For the avoidance of doubt:
|
||||
|
||||
i. Non-waivable Compulsory License Schemes. In those jurisdictions in
|
||||
which the right to collect royalties through any statutory or
|
||||
compulsory licensing scheme cannot be waived, the Licensor
|
||||
reserves the exclusive right to collect such royalties for any
|
||||
exercise by You of the rights granted under this License;
|
||||
ii. Waivable Compulsory License Schemes. In those jurisdictions in
|
||||
which the right to collect royalties through any statutory or
|
||||
compulsory licensing scheme can be waived, the Licensor waives the
|
||||
exclusive right to collect such royalties for any exercise by You
|
||||
of the rights granted under this License; and,
|
||||
iii. Voluntary License Schemes. The Licensor waives the right to
|
||||
collect royalties, whether individually or, in the event that the
|
||||
Licensor is a member of a collecting society that administers
|
||||
voluntary licensing schemes, via that society, from any exercise
|
||||
by You of the rights granted under this License.
|
||||
|
||||
The above rights may be exercised in all media and formats whether now
|
||||
known or hereafter devised. The above rights include the right to make
|
||||
such modifications as are technically necessary to exercise the rights in
|
||||
other media and formats. Subject to Section 8(f), all rights not expressly
|
||||
granted by Licensor are hereby reserved.
|
||||
|
||||
4. Restrictions. The license granted in Section 3 above is expressly made
|
||||
subject to and limited by the following restrictions:
|
||||
|
||||
a. You may Distribute or Publicly Perform the Work only under the terms
|
||||
of this License. You must include a copy of, or the Uniform Resource
|
||||
Identifier (URI) for, this License with every copy of the Work You
|
||||
Distribute or Publicly Perform. You may not offer or impose any terms
|
||||
on the Work that restrict the terms of this License or the ability of
|
||||
the recipient of the Work to exercise the rights granted to that
|
||||
recipient under the terms of the License. You may not sublicense the
|
||||
Work. You must keep intact all notices that refer to this License and
|
||||
to the disclaimer of warranties with every copy of the Work You
|
||||
Distribute or Publicly Perform. When You Distribute or Publicly
|
||||
Perform the Work, You may not impose any effective technological
|
||||
measures on the Work that restrict the ability of a recipient of the
|
||||
Work from You to exercise the rights granted to that recipient under
|
||||
the terms of the License. This Section 4(a) applies to the Work as
|
||||
incorporated in a Collection, but this does not require the Collection
|
||||
apart from the Work itself to be made subject to the terms of this
|
||||
License. If You create a Collection, upon notice from any Licensor You
|
||||
must, to the extent practicable, remove from the Collection any credit
|
||||
as required by Section 4(c), as requested. If You create an
|
||||
Adaptation, upon notice from any Licensor You must, to the extent
|
||||
practicable, remove from the Adaptation any credit as required by
|
||||
Section 4(c), as requested.
|
||||
b. You may Distribute or Publicly Perform an Adaptation only under the
|
||||
terms of: (i) this License; (ii) a later version of this License with
|
||||
the same License Elements as this License; (iii) a Creative Commons
|
||||
jurisdiction license (either this or a later license version) that
|
||||
contains the same License Elements as this License (e.g.,
|
||||
Attribution-ShareAlike 3.0 US)); (iv) a Creative Commons Compatible
|
||||
License. If you license the Adaptation under one of the licenses
|
||||
mentioned in (iv), you must comply with the terms of that license. If
|
||||
you license the Adaptation under the terms of any of the licenses
|
||||
mentioned in (i), (ii) or (iii) (the "Applicable License"), you must
|
||||
comply with the terms of the Applicable License generally and the
|
||||
following provisions: (I) You must include a copy of, or the URI for,
|
||||
the Applicable License with every copy of each Adaptation You
|
||||
Distribute or Publicly Perform; (II) You may not offer or impose any
|
||||
terms on the Adaptation that restrict the terms of the Applicable
|
||||
License or the ability of the recipient of the Adaptation to exercise
|
||||
the rights granted to that recipient under the terms of the Applicable
|
||||
License; (III) You must keep intact all notices that refer to the
|
||||
Applicable License and to the disclaimer of warranties with every copy
|
||||
of the Work as included in the Adaptation You Distribute or Publicly
|
||||
Perform; (IV) when You Distribute or Publicly Perform the Adaptation,
|
||||
You may not impose any effective technological measures on the
|
||||
Adaptation that restrict the ability of a recipient of the Adaptation
|
||||
from You to exercise the rights granted to that recipient under the
|
||||
terms of the Applicable License. This Section 4(b) applies to the
|
||||
Adaptation as incorporated in a Collection, but this does not require
|
||||
the Collection apart from the Adaptation itself to be made subject to
|
||||
the terms of the Applicable License.
|
||||
c. If You Distribute, or Publicly Perform the Work or any Adaptations or
|
||||
Collections, You must, unless a request has been made pursuant to
|
||||
Section 4(a), keep intact all copyright notices for the Work and
|
||||
provide, reasonable to the medium or means You are utilizing: (i) the
|
||||
name of the Original Author (or pseudonym, if applicable) if supplied,
|
||||
and/or if the Original Author and/or Licensor designate another party
|
||||
or parties (e.g., a sponsor institute, publishing entity, journal) for
|
||||
attribution ("Attribution Parties") in Licensor's copyright notice,
|
||||
terms of service or by other reasonable means, the name of such party
|
||||
or parties; (ii) the title of the Work if supplied; (iii) to the
|
||||
extent reasonably practicable, the URI, if any, that Licensor
|
||||
specifies to be associated with the Work, unless such URI does not
|
||||
refer to the copyright notice or licensing information for the Work;
|
||||
and (iv) , consistent with Ssection 3(b), in the case of an
|
||||
Adaptation, a credit identifying the use of the Work in the Adaptation
|
||||
(e.g., "French translation of the Work by Original Author," or
|
||||
"Screenplay based on original Work by Original Author"). The credit
|
||||
required by this Section 4(c) may be implemented in any reasonable
|
||||
manner; provided, however, that in the case of a Adaptation or
|
||||
Collection, at a minimum such credit will appear, if a credit for all
|
||||
contributing authors of the Adaptation or Collection appears, then as
|
||||
part of these credits and in a manner at least as prominent as the
|
||||
credits for the other contributing authors. For the avoidance of
|
||||
doubt, You may only use the credit required by this Section for the
|
||||
purpose of attribution in the manner set out above and, by exercising
|
||||
Your rights under this License, You may not implicitly or explicitly
|
||||
assert or imply any connection with, sponsorship or endorsement by the
|
||||
Original Author, Licensor and/or Attribution Parties, as appropriate,
|
||||
of You or Your use of the Work, without the separate, express prior
|
||||
written permission of the Original Author, Licensor and/or Attribution
|
||||
Parties.
|
||||
d. Except as otherwise agreed in writing by the Licensor or as may be
|
||||
otherwise permitted by applicable law, if You Reproduce, Distribute or
|
||||
Publicly Perform the Work either by itself or as part of any
|
||||
Adaptations or Collections, You must not distort, mutilate, modify or
|
||||
take other derogatory action in relation to the Work which would be
|
||||
prejudicial to the Original Author's honor or reputation. Licensor
|
||||
agrees that in those jurisdictions (e.g. Japan), in which any exercise
|
||||
of the right granted in Section 3(b) of this License (the right to
|
||||
make Adaptations) would be deemed to be a distortion, mutilation,
|
||||
modification or other derogatory action prejudicial to the Original
|
||||
Author's honor and reputation, the Licensor will waive or not assert,
|
||||
as appropriate, this Section, to the fullest extent permitted by the
|
||||
applicable national law, to enable You to reasonably exercise Your
|
||||
right under Section 3(b) of this License (right to make Adaptations)
|
||||
but not otherwise.
|
||||
|
||||
5. Representations, Warranties and Disclaimer
|
||||
|
||||
UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR
|
||||
OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY
|
||||
KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,
|
||||
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY,
|
||||
FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF
|
||||
LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS,
|
||||
WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION
|
||||
OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU.
|
||||
|
||||
6. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
|
||||
LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR
|
||||
ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES
|
||||
ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS
|
||||
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
|
||||
|
||||
7. Termination
|
||||
|
||||
a. This License and the rights granted hereunder will terminate
|
||||
automatically upon any breach by You of the terms of this License.
|
||||
Individuals or entities who have received Adaptations or Collections
|
||||
from You under this License, however, will not have their licenses
|
||||
terminated provided such individuals or entities remain in full
|
||||
compliance with those licenses. Sections 1, 2, 5, 6, 7, and 8 will
|
||||
survive any termination of this License.
|
||||
b. Subject to the above terms and conditions, the license granted here is
|
||||
perpetual (for the duration of the applicable copyright in the Work).
|
||||
Notwithstanding the above, Licensor reserves the right to release the
|
||||
Work under different license terms or to stop distributing the Work at
|
||||
any time; provided, however that any such election will not serve to
|
||||
withdraw this License (or any other license that has been, or is
|
||||
required to be, granted under the terms of this License), and this
|
||||
License will continue in full force and effect unless terminated as
|
||||
stated above.
|
||||
|
||||
8. Miscellaneous
|
||||
|
||||
a. Each time You Distribute or Publicly Perform the Work or a Collection,
|
||||
the Licensor offers to the recipient a license to the Work on the same
|
||||
terms and conditions as the license granted to You under this License.
|
||||
b. Each time You Distribute or Publicly Perform an Adaptation, Licensor
|
||||
offers to the recipient a license to the original Work on the same
|
||||
terms and conditions as the license granted to You under this License.
|
||||
c. If any provision of this License is invalid or unenforceable under
|
||||
applicable law, it shall not affect the validity or enforceability of
|
||||
the remainder of the terms of this License, and without further action
|
||||
by the parties to this agreement, such provision shall be reformed to
|
||||
the minimum extent necessary to make such provision valid and
|
||||
enforceable.
|
||||
d. No term or provision of this License shall be deemed waived and no
|
||||
breach consented to unless such waiver or consent shall be in writing
|
||||
and signed by the party to be charged with such waiver or consent.
|
||||
e. This License constitutes the entire agreement between the parties with
|
||||
respect to the Work licensed here. There are no understandings,
|
||||
agreements or representations with respect to the Work not specified
|
||||
here. Licensor shall not be bound by any additional provisions that
|
||||
may appear in any communication from You. This License may not be
|
||||
modified without the mutual written agreement of the Licensor and You.
|
||||
f. The rights granted under, and the subject matter referenced, in this
|
||||
License were drafted utilizing the terminology of the Berne Convention
|
||||
for the Protection of Literary and Artistic Works (as amended on
|
||||
September 28, 1979), the Rome Convention of 1961, the WIPO Copyright
|
||||
Treaty of 1996, the WIPO Performances and Phonograms Treaty of 1996
|
||||
and the Universal Copyright Convention (as revised on July 24, 1971).
|
||||
These rights and subject matter take effect in the relevant
|
||||
jurisdiction in which the License terms are sought to be enforced
|
||||
according to the corresponding provisions of the implementation of
|
||||
those treaty provisions in the applicable national law. If the
|
||||
standard suite of rights granted under applicable copyright law
|
||||
includes additional rights not granted under this License, such
|
||||
additional rights are deemed to be included in the License; this
|
||||
License is not intended to restrict the license of any rights under
|
||||
applicable law.
|
||||
|
||||
|
||||
Creative Commons Notice
|
||||
|
||||
Creative Commons is not a party to this License, and makes no warranty
|
||||
whatsoever in connection with the Work. Creative Commons will not be
|
||||
liable to You or any party on any legal theory for any damages
|
||||
whatsoever, including without limitation any general, special,
|
||||
incidental or consequential damages arising in connection to this
|
||||
license. Notwithstanding the foregoing two (2) sentences, if Creative
|
||||
Commons has expressly identified itself as the Licensor hereunder, it
|
||||
shall have all rights and obligations of Licensor.
|
||||
|
||||
Except for the limited purpose of indicating to the public that the
|
||||
Work is licensed under the CCPL, Creative Commons does not authorize
|
||||
the use by either party of the trademark "Creative Commons" or any
|
||||
related trademark or logo of Creative Commons without the prior
|
||||
written consent of Creative Commons. Any permitted use will be in
|
||||
compliance with Creative Commons' then-current trademark usage
|
||||
guidelines, as may be published on its website or otherwise made
|
||||
available upon request from time to time. For the avoidance of doubt,
|
||||
this trademark restriction does not form part of the License.
|
||||
|
||||
Creative Commons may be contacted at https://creativecommons.org/.
|
||||
Reference in New Issue
Block a user