Commander1024
60c1e279d6
Introduce an editable KiCad 10 schematic and routed two-layer 82 × 80 mm layout with local provisional footprints, validation tooling, and component research. Keep the RS-232 male-module mapping and mechanical clearances explicitly provisional pending hardware verification.
9 lines
1.3 KiB
CSV
9 lines
1.3 KiB
CSV
References,Quantity,Description,Manufacturer,MPN or identification,Footprint,Status
|
|
U1,1,ESP32-S3 N16R8 development board,User supplied,HW-678 V0.0.0 / ASIN B0F3XMYYQY,Carrier:HW678_2x22_Provisional,Header pitch/spacing confirmed; connector drill fit and module envelope pending
|
|
U2,1,MAX3243 full-pinout RS-232 breakout male,Adafruit,6253,Carrier:MAX3243_Reference_Provisional,PCB-only reference footprint; schematic assignment blank; male header/geometry verification required
|
|
DS1,1,128x64 yellow-blue I2C OLED 26mm PCB,User supplied,ASIN B0F13SSSFB,Carrier:OLED_26mm_I2C_Provisional,Module geometry user-fit-verified; carrier header drill fit pending
|
|
SW1 SW2 SW3,3,Normally-open 6mm THT tactile switch,Omron,B3F-1000,Button_Switch_THT:SW_TH_Tactile_Omron_B3F-100x,Datasheet/footprint checked; stock unverified
|
|
R1 R2 R3,3,2.2k ohm 1 percent axial resistor at least 0.125W,TBD,TBD,Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal,Design value selected; exact MPN and body/lead fit pending
|
|
H1 H2 H3 H4,4,Proposed M3 case mounting locations with 3.2mm NPTH,TBD,TBD,MountingHole:MountingHole_3.2mm_M3,Board-only hole locations; screws and insert/standoff dimensions not selected
|
|
Assembly hardware,TBD,Module headers and optional beta-test sockets plus mounting hardware,TBD,TBD,,Not yet selected; not included in electrical component count
|