Commander1024
c257158ada
Align component groups, repair affected routing, and add preservation audits. Assign the confirmed U2 footprint and update pull-ups to 2 kΩ across design files. Document user acceptance, switch to an A3 worksheet, and refresh PCB exports.
10 lines
1.8 KiB
CSV
10 lines
1.8 KiB
CSV
References,Quantity,Description,Manufacturer,MPN or identification,Footprint,Status
|
|
U1,1,ESP32-S3 N16R8 development board,User supplied,HW-678 V0.0.0 / ASIN B0F3XMYYQY,Carrier:HW678_2x22_Provisional,Dimensions and visual fit including USB placement/clearance user accepted
|
|
U2,1,MAX3243 full-pinout RS-232 breakout male,Adafruit,6253,Carrier:MAX3243_Reference_Provisional,Assigned in schematic and PCB; male pinout/header/footprint equivalence and pin-by-pin review user confirmed
|
|
DS1,1,128x64 yellow-blue I2C OLED 26mm PCB,User supplied,ASIN B0F13SSSFB,Carrier:OLED_26mm_I2C_Provisional,Module geometry and visual fit user confirmed; onboard I2C pull-ups present but values/rail unmeasured
|
|
SW1 SW2 SW3,3,Normally-open 6mm THT tactile switch,Omron,B3F-1000,Button_Switch_THT:SW_TH_Tactile_Omron_B3F-100x,User reports purchased; datasheet/footprint mapping checked
|
|
R1 R2 R3,3,2k ohm 1 percent metal-film axial resistor,TBD,User purchased; exact MPN and wattage unspecified,Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal,Visual dimensions accepted; retained nominal 6.3x2.5mm body and 7.62mm pitch; design rating at least 0.125W
|
|
H1 H2 H3 H4,4,M3 carrier mounting locations with 3.2mm NPTH,User selected,M3 screws and 10mm brass standoffs into heat inserts,MountingHole:MountingHole_3.2mm_M3,User approved; board-only holes excluded from electrical component count
|
|
Module mounting hardware,TBD,M3 daughterboard screws and M2 OLED hardware,User selected,Exact insert and screw lengths unspecified,,User approved; case wall and detailed fastener specifications not defined
|
|
Module headers,TBD,8.5mm female headers and standard male headers,User selected,Male described as adding 2.5mm,,User intended/reported assembled elevation 10mm; not independently measured; arithmetic sum 11mm is not verified mating height; RS232 prongs clear per user
|