Added remote receiver/transmitter config.

Captured and inserted a Samsung and Yamaha power button raw code.

Receive somewhat consistent, transmit flaky - maybe hardware?

esphome/sleepingroom.yaml

@@ -150,8 +150,40 @@ sensor:
     address: 0x76
     update_interval: 60s
 
-script:
-  - id: startup_animation
-    then:
-      - delay: 5s
-      - 
+remote_receiver:
+  pin: 
+    number: 23
+    inverted: true
+  dump: all
+
+remote_transmitter:
+  pin: GPIO22
+  # Infrared remotes use a 50% carrier signal
+  carrier_duty_percent: 50%
+
+switch:
+  - platform: template
+    name: Yamaha Power Button
+    turn_on_action:
+      - remote_transmitter.transmit_raw:
+          carrier_frequency: 38kHz
+          # Yamaha power button
+          code: [ 9922, -3533, 2643, -699, 1542, -700, 1543, -699, 1540, -702,
+                  1540, -702, 1540, -703, 2660, -703, 8266, -703, 2657, -707,
+                  2655, -708, 2654, -710, 3773, -712, 2651, -712, 2651, -713,
+                  2650, -717, 11, -2, 1510, -733, 1507, -5652, 9905, -1301,
+                  1510 ]
+  - platform: template
+    name: Samsung Power Button
+    turn_on_action:
+      - remote_transmitter.transmit_raw:
+          carrier_frequency: 38kHz
+          # Samsung power button
+          code: [ 5430, -3513, 1515, -724, 1519, -723, 1519, -723, 7157, -723, 
+                  1519, -722, 1518, -724, 8284, -724, 8284, -724, 2645, -724,
+                  1519, -723, 1517, -725, 1517, -725, 1518, -724, 1517, -725 ]
+#script:
+#  - id: startup_animation
+#    then:
+#      - delay: 5s
+#      -