Increased camera resolution

esphome/archive/aussensensor.yaml

@@ -0,0 +1,58 @@
+substitutions:
+  name: "aussensensor"
+  friendly_name: "Außensensor"
+
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: false
+  project:
+    name: sensor.outdoor
+    version: "0.8"
+  min_version: 2022.1.0
+
+esp32:
+  board: nodemcu-32s
+  framework:
+    type: arduino
+
+wifi:
+  ssid: "Voltage-legacy"
+  password: !secret voltage_legacy_psk
+  use_address: ${name}.home  
+  power_save_mode: high
+  fast_connect: on
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Aussensensor Fallback Hotspot"
+    password: !secret fallback_psk
+
+captive_portal:
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption: 
+    key: !secret apikey
+
+ota:
+  platform: esphome
+  password: !secret ota
+
+# DHT22 sensor
+sensor:
+  - platform: dht
+    model: dht22
+    pin: 25
+    temperature:
+      name: "Temperatur außen"
+    humidity:
+      name: "Luftfeuchtigkeit außen"
+    update_interval: 60s
+# WiFi signal strength
+  - platform: wifi_signal
+    name: "WiFi Signalstärke"
+    update_interval: 60s

esphome/kamera-balkon.yaml

@@ -67,12 +67,12 @@ esp32_camera:
   href_pin: GPIO23
   pixel_clock_pin: GPIO22
   power_down_pin: GPIO32
-  resolution: SVGA
+  resolution: XGA
   max_framerate: 24 fps
   idle_framerate: 0.2 fps
-  jpeg_quality: 30
+  jpeg_quality: 15
   agc_mode: auto
-  agc_gain_ceiling: 4x
+  agc_gain_ceiling: 8x
   wb_mode: auto
   vertical_flip: true
   horizontal_mirror: true

esphome/kamera-wohnzimmer.yaml

@@ -56,12 +56,12 @@ esp32_camera:
   href_pin: GPIO23
   pixel_clock_pin: GPIO22
   power_down_pin: GPIO32
-  resolution: SVGA
+  resolution: XGA
   max_framerate: 24 fps
   idle_framerate: 0.2 fps
-  jpeg_quality: 30
+  jpeg_quality: 15
   agc_mode: auto
-  agc_gain_ceiling: 4x
+  agc_gain_ceiling: 8x
   wb_mode: auto
   vertical_flip: true
   horizontal_mirror: true