Clarify e-paper dashboard and calendar pipeline by adding inline

comments.

esphome/epaperframe.yaml

@@ -1,7 +1,10 @@
+# Device identity shared by ESPHome and Home Assistant.
 substitutions:
   name: epaperframe
   friendly_name: "Info-Dashboard"
 
+# Startup selects the default page only after Home Assistant has had time to
+# provide the sensor states needed by its display lambda.
 esphome:
   name: ${name}
   friendly_name: ${friendly_name}
@@ -18,13 +21,15 @@ esphome:
       - display.page.show: calendar # temporary for power page dev
       - component.update: epaper
 
+# ESP32 target and ESP-IDF build settings for the hardware revision in use.
 esp32:
   board: nodemcu-32s
   framework:
     type: esp-idf
-    advanced: 
+    advanced:
       minimum_chip_revision: "3.0"
 
+# Network access is required for Home Assistant state delivery and OTA updates.
 wifi:
   ssid: "Voltage-legacy"
   password: !secret voltage_legacy_psk
@@ -51,6 +56,13 @@ api:
 # Include ArduinoJson support for the compact calendar event feed.
 json:
 
+# Prevent refreshes when Home Assistant republishes unchanged calendar data.
+globals:
+  - id: last_rendered_calendar_entries
+    type: std::string
+    restore_value: no
+    initial_value: '""'
+
 ota:
   platform: esphome
   password: !secret ota
@@ -117,6 +129,7 @@ button:
       - display.page.show_next: epaper
       - component.update: epaper
 
+# Numeric telemetry received from Home Assistant for the environment dashboard.
 sensor:
   # WiFi signal strength
   - platform: wifi_signal
@@ -194,6 +207,7 @@ sensor:
     entity_id: sensor.radioaktive_strahlungsleistung
     id: radiation
 
+# Textual Home Assistant state, including the compact calendar payload and quote.
 text_sensor:
   - platform: homeassistant
     name: "Sun Rising ESP"
@@ -222,6 +236,19 @@ text_sensor:
     entity_id: sensor.epaper_kalenderdaten
     attribute: entries
     id: calendar_entries
+    # Refresh the e-paper only for changed agenda data while the calendar page
+    # is visible; Home Assistant may otherwise republish identical JSON.
+    on_value:
+      then:
+        - if:
+            condition:
+              and:
+                - display.is_displaying_page: calendar
+                - lambda: return x != id(last_rendered_calendar_entries);
+            then:
+              - lambda: id(last_rendered_calendar_entries) = x;
+              - component.update: epaper
+
 
   # Home Assistant selects one quote per day from its local quote library.
   - platform: homeassistant
@@ -230,6 +257,8 @@ text_sensor:
 
 
 
+# Time drives panel power maintenance, the environment refresh cadence, and the
+# midnight redraw that advances the calendar and daily quote.
 time:
   - platform: homeassistant
     id: homeassistant_time
@@ -243,14 +272,19 @@ time:
           - output.turn_on: power_key
           - delay: 0.5s
           - output.turn_off: power_key
-      # Every 10 minutes
+      # Environmental readings need their regular refresh. Calendar updates are
+      # instead triggered by changed event data while that page is active.
       - seconds: 0
         minutes: /10
         then:
-          - logger.log:
-              level: INFO
-              format: "Timer based screen refresh"
-          - component.update: epaper
+          - if:
+              condition:
+                display.is_displaying_page: environment
+              then:
+                - logger.log:
+                    level: INFO
+                    format: "Timer based environment screen refresh"
+                - component.update: epaper
       - seconds: 10
         minutes: 0
         hours: 0
@@ -260,6 +294,7 @@ time:
               format: "Update screen on new day"
           - component.update: epaper
 
+# Visual assets used by both 1-bit e-paper pages.
 # Font definitions
 font:
   - file: "fonts/Roboto-Medium.ttf"
@@ -720,17 +755,21 @@ font:
         "󰀦", # mdi-alert
       ]
 
+# Binary logo stored in firmware for rendering without network access.
 image:
-  - file: "epaperframe/C1024_logo_flat_bw.png"
+  - platform: file
+    file: "epaperframe/C1024_logo_flat_bw.png"
     id: c1024_logo
     type: binary
     resize: 77x40
-    invert_alpha: True
+    invert_alpha: true
 
+# Shared SPI bus for the Waveshare e-paper panel.
 spi:
   clk_pin: 23
   mosi_pin: 22
 
+# The two pages draw directly onto the 640x384 1-bit Waveshare e-paper panel.
 display:
   - platform: waveshare_epaper
     id: epaper
@@ -742,8 +781,11 @@ display:
     # full_update_every: 30 # not supported on this display
     update_interval: never
     pages:
+      # Environmental telemetry dashboard, refreshed on the 10-minute timer.
       - id: environment
         lambda: |-
+          // Snapshot all Home Assistant values once per render so each panel uses
+          // a consistent set of readings throughout this e-paper refresh.
           /* Outdoor */
           float outdoor_temp = id(temp_outdoor).state;
           int outdoor_humid = int(id(humid_outdoor).state);
@@ -767,10 +809,11 @@ display:
           float childrensroom_co2 = id(co2_childrensroom).state;
           int childrensroom_pm25 = int(id(pm25_childrensroom).state);
 
+          // Reuse one room widget layout by moving its origin across the two-column grid.
           int offsetX = 0;
           int offsetY = 0;
 
-          /* OUTSIDE */
+          /* OUTSIDE: logo, headline, and outdoor sensor summary */
           it.print(10, 10, id(sensor_unit), "Umwelt");
           /*
           Draw the outline of a rectangle with the top left at [86,21],
@@ -1114,8 +1157,11 @@ display:
             }
           }
 
+      # Calendar agenda, month grid, and daily quote; redraws when event JSON changes.
       - id: calendar
         lambda: |-
+          // Use Home Assistant time for all date labels, month calculations, and
+          // the footer, avoiding locale-dependent formatting on the ESP32.
           auto now = id(homeassistant_time).now();
           const char *months[] = {"Januar", "Februar", "März", "April", "Mai", "Juni",
                                   "Juli", "August", "September", "Oktober", "November", "Dezember"};
@@ -1125,6 +1171,8 @@ display:
           const int month = now.month;
           const int today = now.day_of_month;
 
+          // Date helpers build a Monday-first month grid and ISO-8601 week numbers
+          // without relying on platform-specific C library time functions.
           auto days_in_month = [](int calendar_year, int calendar_month) {
             const int days[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
             if (calendar_month == 2) {
@@ -1164,6 +1212,8 @@ display:
           it.line(10, 55, 355, 55);
           it.line(365, 10, 365, 352);
 
+          // Parse the compact JSON attribute produced by Home Assistant. The empty
+          // and error states below ensure a useful screen while data is unavailable.
           JsonDocument calendar_doc;
           const DeserializationError calendar_error = deserializeJson(calendar_doc, id(calendar_entries).state.c_str());
           JsonArray calendar_days = calendar_doc.as<JsonArray>();
@@ -1185,6 +1235,8 @@ display:
                 break;
               }
 
+              // A date rail occupies the left edge; event rows start alongside it
+              // and stop before the footer rather than overflowing the panel.
               const int group_y = agenda_y;
               int event_y = group_y;
               const int day_number = day["day"] | 0;
@@ -1226,6 +1278,8 @@ display:
 
 
           /* RIGHT TOP: month view, Monday-first with ISO week numbers */
+          // Draw only the five or six rows this month actually needs so no orphan
+          // week number is rendered beneath shorter months.
           char month_title[24];
           snprintf(month_title, sizeof(month_title), "%s %d", months[month - 1], year);
           it.printf(502, 18, id(sensor_unit), TextAlign::TOP_CENTER, "%s", month_title);
@@ -1274,6 +1328,7 @@ display:
           }
 
           /* RIGHT BOTTOM: daily quote selected by Home Assistant */
+          // Wrap on word boundaries into the fixed four-line, inverted quote panel.
           it.filled_rectangle(375, 220, 255, 130, COLOR_ON);
           std::string quote = "Zitat wird geladen.";
           if (id(demotivational_quote).has_state() && !id(demotivational_quote).state.empty()) {
@@ -1295,7 +1350,7 @@ display:
             while (quote_start < quote.length() && quote[quote_start] == ' ') quote_start++;
           }
 
-          /* FOOTER */
+          /* FOOTER: Footer is shared visual status: render timestamp plus a Wi-Fi-strength glyph. */
           it.strftime(614, 380, id(footer_font), TextAlign::BASELINE_RIGHT,
                       "Aktualisiert um %d.%m.%Y %H:%M", now);
 

esphome/riden-labornetzteil-18a.yaml

@@ -10,7 +10,7 @@ substitutions:
   device_friendly_name: "Riden RD6018"
   device_description: "Monitor and control a RD6018 PSU via WiFi"
   time_timezone: "Europe/Berlin"
-  
+
   # Model specific settings (Don't change these!)
   RD6006_voltage_maximum: "60"
   RD6006_voltage_accuracy: "2"
@@ -20,7 +20,7 @@ substitutions:
   RD6006_current_multiplier: "0.001"
   RD6006_power_accuracy: "2"
   RD6006_power_multiplier: "0.01"
-  
+
   RD6006P_voltage_maximum: "60"
   RD6006P_voltage_accuracy: "3"
   RD6006P_voltage_multiplier: "0.001"
@@ -66,7 +66,7 @@ network:
 wifi:
   ssid: "Voltage-legacy"
   password: !secret voltage_legacy_psk
-  use_address: riden-labornetzteil-18a.home  
+  use_address: riden-labornetzteil-18a.home
   power_save_mode: high
   fast_connect: on
   min_auth_mode: WPA2
@@ -86,7 +86,7 @@ logger:
 
 # Enable Home Assistant API
 api:
-  encryption: 
+  encryption:
     key: !secret apikey
 
 ota:
@@ -159,10 +159,12 @@ sensor:
     register_type: holding
     value_type: U_WORD
     accuracy_decimals: 0
-#    on_value:
-#      then:
-#        - lambda: |-
-#            id(model_name).publish_state(value_accuracy_to_string(x, 0));
+    on_value:
+      then:
+        - lambda: |-
+            id(model_name).publish_state(
+              std::to_string(static_cast<uint16_t>(x))
+            );
 
   - platform: modbus_controller
     name: "Serial Number"
@@ -174,7 +176,7 @@ sensor:
     register_type: holding
     value_type: U_DWORD
     accuracy_decimals: 0
-  
+
   - platform: modbus_controller
     modbus_controller_id: powersupply
     address: 3
@@ -279,7 +281,7 @@ sensor:
     accuracy_decimals: 2
     filters:
       - multiply: 0.01
-  
+
   - platform: modbus_controller
     name: "Temperature"
     device_class: temperature
@@ -289,7 +291,7 @@ sensor:
     address: 4
     value_type: S_DWORD
     unit_of_measurement: "°C"
-    
+
   - platform: modbus_controller
     name: "Temperature external"
     state_class: measurement
@@ -299,7 +301,7 @@ sensor:
     value_type: S_DWORD
     device_class: temperature
     unit_of_measurement: "°C"
-    
+
   - platform: wifi_signal
     name: "Wi-Fi Signal"
     disabled_by_default: True
@@ -418,7 +420,7 @@ number:
     step: ${${model}_voltage_multiplier}
     lambda: !lambda return x * ${${model}_voltage_multiplier};
     write_lambda: !lambda return x * (1/${${model}_voltage_multiplier});
-  
+
   - platform: modbus_controller
     modbus_controller_id: powersupply
     name: "Output current"
@@ -447,7 +449,6 @@ number:
     lambda: !lambda return x * ${${model}_voltage_multiplier};
     write_lambda: !lambda return x * (1/${${model}_voltage_multiplier});
 
-
   - platform: modbus_controller
     modbus_controller_id: powersupply
     name: "Over Current Protection"

esphome/riden-labornetzteil-6a.yaml

@@ -10,7 +10,7 @@ substitutions:
   device_friendly_name: "Riden RD6006"
   device_description: "Monitor and control a RD6006 PSU via WiFi"
   time_timezone: "Europe/Berlin"
-  
+
   # Model specific settings (Don't change these!)
   RD6006_voltage_maximum: "60"
   RD6006_voltage_accuracy: "2"
@@ -20,7 +20,7 @@ substitutions:
   RD6006_current_multiplier: "0.001"
   RD6006_power_accuracy: "2"
   RD6006_power_multiplier: "0.01"
-  
+
   RD6006P_voltage_maximum: "60"
   RD6006P_voltage_accuracy: "3"
   RD6006P_voltage_multiplier: "0.001"
@@ -55,7 +55,7 @@ esphome:
   name_add_mac_suffix: false
   project:
     name: "wildekek.rd6006-controller"
-    version: "1.4.1"
+    version: "1.5"
 
 esp8266:
   board: esp12e
@@ -66,7 +66,7 @@ network:
 wifi:
   ssid: "Voltage-legacy"
   password: !secret voltage_legacy_psk
-  use_address: riden-labornetzteil-6a.home  
+  use_address: riden-labornetzteil-6a.home
   power_save_mode: high
   fast_connect: on
   min_auth_mode: WPA2
@@ -86,7 +86,7 @@ logger:
 
 # Enable Home Assistant API
 api:
-  encryption: 
+  encryption:
     key: !secret apikey
 
 ota:
@@ -159,10 +159,12 @@ sensor:
     register_type: holding
     value_type: U_WORD
     accuracy_decimals: 0
-#    on_value:
-#      then:
-#        - lambda: |-
-#            id(model_name).publish_state(value_accuracy_to_string(x, 0));
+    on_value:
+      then:
+        - lambda: |-
+            id(model_name).publish_state(
+              std::to_string(static_cast<uint16_t>(x))
+            );
 
   - platform: modbus_controller
     name: "Serial Number"
@@ -174,7 +176,7 @@ sensor:
     register_type: holding
     value_type: U_DWORD
     accuracy_decimals: 0
-  
+
   - platform: modbus_controller
     modbus_controller_id: powersupply
     address: 3
@@ -279,7 +281,7 @@ sensor:
     accuracy_decimals: 2
     filters:
       - multiply: 0.01
-  
+
   - platform: modbus_controller
     name: "Temperature"
     device_class: temperature
@@ -289,7 +291,7 @@ sensor:
     address: 4
     value_type: S_DWORD
     unit_of_measurement: "°C"
-    
+
   - platform: modbus_controller
     name: "Temperature external"
     state_class: measurement
@@ -299,7 +301,7 @@ sensor:
     value_type: S_DWORD
     device_class: temperature
     unit_of_measurement: "°C"
-    
+
   - platform: wifi_signal
     name: "Wi-Fi Signal"
     disabled_by_default: True
@@ -418,7 +420,7 @@ number:
     step: ${${model}_voltage_multiplier}
     lambda: !lambda return x * ${${model}_voltage_multiplier};
     write_lambda: !lambda return x * (1/${${model}_voltage_multiplier});
-  
+
   - platform: modbus_controller
     modbus_controller_id: powersupply
     name: "Output current"

python_scripts/epaper_calendar_data.py

@@ -1,3 +1,5 @@
+# Display contract shared with the ESPHome calendar page: compact German labels,
+# a bounded number of events, and strings sized for the e-paper layout.
 CALENDAR_NAMES = {
     "calendar.tkrz_kalender": "Arbeit",
     "calendar.privat": "Privat",
@@ -9,6 +11,7 @@ MAX_TITLE_LENGTH = 22
 MAX_META_LENGTH = 35
 
 
+# Keep variable event text within the fixed-width e-paper agenda columns.
 def shorten(value, maximum):
     value = (value or "").strip()
     if len(value) <= maximum:
@@ -16,11 +19,13 @@ def shorten(value, maximum):
     return value[: maximum - 3].rstrip() + "..."
 
 
+# Convert one Home Assistant calendar event into the small JSON shape consumed
+# by ESPHome, separating all-day, start-time, end-time, and metadata display data.
 def compact_event(event, calendar_name):
     start = event.get("start", "")
     all_day = "T" not in start
     end = event.get("end", "")
-    time = "ganztägig" if all_day else start[11:16]
+    time = "ganzt." if all_day else start[11:16]
     end_time = "" if all_day or "T" not in end else end[11:16]
 
     location = (event.get("location") or "").split("\n")[0].strip()
@@ -37,6 +42,8 @@ def compact_event(event, calendar_name):
     }
 
 
+# Read the calendar.get_events response supplied by the calling template sensor
+# and collect events under the date on which they should appear in the agenda.
 calendar_data = data.get("calendar", {})
 today = str(data.get("now", ""))[:10]
 events_by_date = {}
@@ -62,6 +69,8 @@ for calendar_id, calendar in calendar_data.items():
             compact_event(event, calendar_name)
         )
 
+# Sort day groups and events, put all-day entries first, and cap the payload so
+# deserializing it stays safe on the ESP32 without PSRAM.
 entries = []
 entry_count = 0
 for date in sorted(events_by_date):
@@ -84,4 +93,5 @@ for date in sorted(events_by_date):
         }
     )
 
+# Return only the normalized agenda payload to the Home Assistant template sensor.
 output["entries"] = entries