Removed and ignored pycache.

.HA_VERSION

@@ -1 +1 @@
-2024.1.3
+2024.1.4

.gitignore

@@ -11,4 +11,4 @@ media/
 home-assistant.log*
 .storage/
 zigbee.db*
-
+*__pycache__*

automations.yaml

@@ -427,10 +427,6 @@
       - 32d15eec63fe68d5770813d47da53657
       - 53a27edf581fcf40f3bc8b253b1ee369
     data: {}
-  - type: turn_on
-    device_id: c4ead7f6227e2ee4c43c4b0df829cd84
-    entity_id: 7f7284b11f2bf50ae2f0ebeeb35411c0
-    domain: switch
   mode: single
 - id: '1648485179021'
   alias: Schalte den Fernseher mit WoL ein

esphome/epaperframe.yaml

@@ -158,11 +158,11 @@ sensor:
     id: humid_outdoor
 
   - platform: homeassistant
-    entity_id: sensor.luftdruck
+    entity_id: sensor.serverroom_luftdruck
     id: airpressure
 
   - platform: homeassistant
-    entity_id: sensor.serveraum_temperatur
+    entity_id: sensor.serverroom_serveraum_temperatur
     id: temp_serverroom
 
   - platform: homeassistant
@@ -437,7 +437,7 @@ display:
           it.print(375, 130, id(mdi_small), TextAlign::BASELINE_CENTER, "󰖎"); // water percent icon
           it.print(95, 80,  id(mdi_small), TextAlign::BASELINE_LEFT, "󰐼"); // radioactive icon
 
-          if(outdoor_radiation > 0 && outdoor_radiation < 100) {
+          if(outdoor_radiation >= 0) {
             it.printf(200, 80, id(sub_sensor_font), TextAlign::BASELINE_RIGHT, "%2.2f", outdoor_radiation);
             it.print(205, 80, id(sensor_unit), TextAlign::BASELINE_LEFT, "µS/h");
           }

esphome/kamera-wohnzimmer.yaml

@@ -0,0 +1,77 @@
+substitutions:
+  name: kamera-wohnzimmer
+  friendly_name: Kamera Wohnzimmer
+
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: false
+  project:
+    name: sensor.camera
+    version: "1.0"
+  min_version: 2022.1.0
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+wifi:
+  ssid: "Voltage-legacy"
+  password: !secret voltage_legacy_psk
+  use_address: ${name}.home  
+  power_save_mode: high
+  fast_connect: on
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Cam Wohnzimmer Fallback Hotspot"
+    password: !secret fallback_psk
+
+captive_portal:
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption: 
+    key: !secret apikey
+
+ota:
+  password: !secret ota
+
+# Camera
+esp32_camera:
+  name: ${friendly_name}
+  external_clock:
+    pin: GPIO0
+    frequency: 20MHz
+  i2c_pins:
+    sda: GPIO26
+    scl: GPIO27
+  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
+  vsync_pin: GPIO25
+  href_pin: GPIO23
+  pixel_clock_pin: GPIO22
+  power_down_pin: GPIO32
+  resolution: SVGA
+  max_framerate: 24 fps
+  idle_framerate: 0.2 fps
+  jpeg_quality: 30
+  vertical_flip: true
+  horizontal_mirror: true
+
+# Flash LED
+output:
+- platform: ledc
+  pin: GPIO4
+  id: flash
+  channel: 2
+
+# Define RGB mode for LED
+light:
+  - platform: monochromatic
+    id: flashlight
+    name: "Blitzlicht"
+    output: flash

esphome/serverroom.yaml

@@ -1,8 +1,20 @@
-esphome:
+substitutions:
-  name: serverroom
+  name: "serverroom"
   friendly_name: "Serverraum Luft"
-  platform: ESP32
+
-  board: nodemcu-32s
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: false
+  project:
+    name: sensor.outdoor
+    version: "0.8"
+  min_version: 2022.1.0
+
+esp32:
+  board: esp32-c3-devkitm-1
+  framework:
+    type: arduino
 
 wifi:
   ssid: "Voltage-legacy"
@@ -23,7 +35,6 @@ logger:
 
 # Enable Home Assistant API
 api:
-  password: !secret api
   encryption: 
     key: !secret apikey
 
@@ -33,11 +44,11 @@ ota:
 # Initialize I²C
 i2c:
  - id: bus_a
-   sda: 32
+   sda: 4
-   scl: 25
+   scl: 3
    scan: true
 
-# DHT22 sensor
+# BMP280 sensor
 sensor:
   - platform: bmp280
     i2c_id: bus_a